河豚鱼脂肪酸的气相色谱—质谱分析

采用ＧＣ／ＭＳ技术对２种河豚鱼（黄鳍、红鳍）脂肪提取物中的脂肪酸进行定性定量分析，共鉴别出２４种脂肪酸。多不饱和脂肪酸尤其是二十二碳六烯酸（ＤＨＡ）的含量很高，在黄猪中相对含量达３２．３２％，在红鳍中达２４．１１％。检出了在其它海产品中较少发现的１５－二十四烯酸（神经酸），是人体生长发育不可缺少的一种脂肪酸。对鱼肉脂肪提取方法及不同极性毛细管柱分离情况进行了讨论。     

Selective Solid Phase Extraction and Pre-Concentration of Heavy Metals from Seawater by Physically and Chemically Immobilized 4-Amino-3-Hydroxy-2-(2-Chlorobenzene)-Azo-1-Naphthalene Sulfonic Acid Silica Gel

4-Amino-3-hydroxy-2-(2-chlorobenzene)-azo-1-naphthalene sulfonic acid (AHCANSA) was used as a chelating modifier to improve the reactivity of the silica gel surface in terms of selective binding and extraction of heavy metal ions. The surface coverage values were found to be 0.488 and 0.473mmolg^–1 for the newly modified physically adsorbed silica gel phase (I) and chemically immobilized-AHCANSA phase (II), respectively. The modified silica gel phases (I, II) were tested for stability in different acidic buffer solutions (pH 1–6) and found to be highly resistant to hydrolysis and leaching by buffer solutions above pH 2. The application of these two phases as solid extractors for a series of mono-, di-, and tri-valent metal ions from aqueous solutions was also performed with different controlling factors such as the pH value of metal ion solutions and equilibrium shaking time. The mmolg^–1 metal capacity values determined by silica gel phases (I, II) were found to confirm high affinity and selectivity characters for binding with heavy metal ions such as Cr³⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺ and Pb²⁺ in a range of 0.250–0.483. The tested alkali and alkaline earth metals, Na⁺, K⁺, Mg²⁺ and Ca²⁺, were found to exhibit little interaction and binding ability with the modified silica gel phases. The selectivity characters incorporated into the modified silica gel phases were further utilized and applied in solid phase extraction and pre-concentration of trace concentration levels (1.0µgmL^–1 and 2.00–2.50ngmL^–1) from real seawater samples. The percentage recovery values determined for Cr³⁺, Cu²⁺, Zn²⁺, Cd²⁺ and Pb²⁺ were found to be in the range of 95.2–98.1±2.0–5.0%, and the pre-concentration recovery values for the same tested heavy metal ions were found to be in the range of 92.5–97.1±3.0–6.0% for the two newly modified silica gel phases with a pre-concentration factor of 500.Received December 20, 2002; accepted May 14, 2003 published online September 1, 2003     

Removal of humic matter interference in the determination of Cr(VI) in soil extracts by the diphenylcarbazide method

Alkaline digestion of soil samples, which is recommended for minimizing Cr(III)–Cr(VI) interconversions during the extraction of Cr(VI), may also solubilize humic matter (HM). The latter is responsible for both positive and negative interference in the analysis of Cr(VI) in the extract by the diphenylcarbazide (DPC) method. Humic compounds indeed absorb light at 540 nm as the Cr-DPC product and are also able to rapidly reduce Cr(VI) under the pH conditions of the standard DPC method. To prevent any risk of interference and make the DPC method applicable to soil extracts, a new protocol is proposed. This consists of three successive steps: (1) extraction of Cr(VI) by the U.S.EPA method 3060A in the presence of Mg²⁺; (2) batch removal of solubilised HM by the XAD-7 sorbent at pH 3.0 ± 0.1 with 3–5 min contact time; (3) analysis of Cr(VI) with the DPC method at pH 3.0 ± 0.1. The application of this new protocol to the soil product SQC-012 Lot 4 certified by R.T. Corporation (RTC, USA) gave significantly lower Cr(VI) concentrations and smaller variability compared to certified values (46.5 ± 2.3 instead of 153 ± 32.6 mg/kg). The new protocol was validated by Cr(VI) and Cr(III) spikes either to the soil/extractant suspension or to the exctract. Cr(VI) results in the wide range of acceptance limits (104–202 mg/kg) reported by RTC were only obtained when the U.S.EPA method 3060A without the addition of Mg²⁺ and DPC analysis at pH 1.0 were applied. The latter procedure appears questionable since it leads to largely variable results which reflect the complex role played by humic matter in the determination of Cr(VI) and the instability of Cr(III) during the extraction.     

Application of a sequential extraction procedure to study the release of elements from municipal solid waste incineration bottom ash

The release of five elements (Cr, Cu, Mn, Pb and Zn) from a municipal solid waste incineration bottom ash (BA) under different extraction conditions has been investigated by performing the three-step sequential extraction procedure proposed by the Standards, Measurements and Testing Program of the European Union. A fourth step (strong acid attack) has been added in order to calculate the mass balance. The results of this study provide information on the potential mobility of the studied elements. Almost all of the Cr and part of the Mn are extracted with strong acid which indicates low potential mobility in the environment. Most of the Cu is extracted under oxidizing conditions. Pb and Zn are released under acidic condition, indicating the possibility of their mobilization by changes in pH. The reproducibility of the sequential extraction procedure is also discussed.     

A microwave-assisted sequential extraction of water and dilute acid soluble arsenic species from marine plant and animal tissues

This paper describes the use of dilute nitric acid for the extraction and quantification of arsenic species. A number of extractants (e.g. water, 1.5 M orthophosphoric acid, methanol-water and dilute nitric acid) were tested for the extraction of arsenic from marine biological samples, such as plants that have proved difficult to quantitatively extract. Dilute 2% (v/v) nitric acid was found to give the highest recoveries of arsenic overall and was chosen for further optimisation. The optimal extraction conditions for arsenic were 2% (v/v) HNO₃, 6 min⁻¹, 90 °C. Arsenic species were found to be stable under the optimised conditions with the exception of the arsenoriboses which degraded to a product eluting at the same retention time as glycerol arsenoribose. Good agreement was found between the 2% (v/v) HNO₃ extraction and the methanol-water extraction for the certified reference material DORM-2 (AB 17.1 and 16.2 μg g⁻¹, respectively, and TETRA 0.27 and 0.25 μg g⁻¹, respectively), which were in close agreement with the certified concentrations of AB 16.4 ± 1.1 μg g⁻¹ and TETRA 0.248 ± 0.054 μg g⁻¹.To preserve the integrity of arsenic species, a sequential extraction technique was developed where the previously methanol-water extracted pellet was further extracted with 2% (v/v) HNO₃ under the optimised conditions. Increases in arsenic recoveries between 13% and 36% were found and speciation of this faction revealed that only inorganic and simple methylated species were extracted.     

Simultaneous extraction of organotin, organolead and organomercury species from soils and litter

Extracting organotin compounds (OTC) from soils is difficult due to the high cation exchange and complexation capacity of soils, and little information about OTC in soils is available. In this study, a new extraction method, combining 1 M CaCl₂, 0.1% tropolone, and glacial acetic acid was developed. Recoveries of mono-substituted OTC from spiked plant litter, and soil samples were improved substantially to 40% compared to classical glacial acetic acid extraction commonly used in sedimentology, yielding <10% recovery in C-rich soil samples. Simultaneously, the recovery of other OTC, trimethyllead and monomethylmercury was satisfactory. The recoveries of most species from the spiked litter, upland and wetland soils exceeded 70%. The new method extracted much more organometallics from unspiked organic soils and litter than microwave- and ultrasound-assisted extraction and accelerated solvent extraction, most likely due to exchange of organometallics from the solid phase by Ca²⁺. The method is simple, highly efficient and with low contamination. Together with GC-ICP-mass spectrometry, the method allows the detection of these organometallics in the pg g⁻¹ range and it is particularly suitable for soil and plant materials with low organometallics contents.     

Determination of the Insect Repellent Bayrepel® in Pool and Lake Water by Gas Chromatography after Preconcentration with Solid-Phase Extraction and Stir-Bar-Sorptive Extraction

A method for the determination of the new insect repellent Bayrepel in bathing lakes and public pools is presented. Sample preconcentration is performed either by solid-phase extraction (SPE) or stir bar sorptive extraction (SBSE). Analysis of the enriched analyte using gas chromatography-mass spectrometry (GC-MS) led to almost identical limits of detection (LOD) of 25ngL^–1 for Bayrepel with both extraction methods. Because of the slightly reduced handling effort involved, the method based on preconcentration by SBSE was finally chosen for the analysis of real samples.     

Optimisation of stir bar sorptive extraction for the analysis of volatile phenols in wines

An easy, fast and reliable analytical method is proposed for the determination of the concentration of volatile phenols (ethyl- and vinylphenols) in wines. The novel stir bar sorptive extraction (SBSE) technique is employed, following a simple and fast procedure that allows 15 samples to be extracted simultaneously using very small sample volume. Extracts are desorbed in a thermodesorption system (TDS) coupled on-line to a gas chromatograph-mass spectrometry system. The SBSE offers better recovery and linear regression coefficient (r2) for the four volatile phenols than solid-phase extraction (SPE). The mass spectrometric detection in selected ion monitoring mode contributes to the lower detection limit and good sensibility obtained with this method.     

Immunochemical determination of dioxins in sediment and serum samples

Polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) are considered highly toxic contaminants and the environmental and biological monitoring of these compounds is of great concern. Immunoassays may be used as screening methods to satisfy the growing demand for rapid and low cost analysis. In this work, we describe the application of an immunoassay that uses 2,3,7-trichloro-8-methyldibenzo-p-dioxin (TMDD) as a surrogate standard for 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) to sediment and human serum samples. Sample extraction and preparation methods were developed with the aim to establish the simplest, cost-effective and efficient removal of the matrix interferences in the enzyme-linked immunosorbent assay (ELISA). The overall method for sediments is based on a hexane extraction; clean up by a multilayered silica gel column and an activated carbon column; an organic solvent exchange with DMSO–Triton X-100 and ELISA measurement. The gas chromatography–high resolution mass spectrometry (GC–HRMS) validation studies (n = 13) revealed that the method is suitable for the toxic equivalents (TEQ) screening of dioxin in sediments with a method detection limit of about 100 pg g⁻¹ dry sediment with a precision of 13–33% R.S.D. The analysis of a large number of samples originating from different sources would be required to establish more precisely the screening level, as well as the number of false positives and negatives of dioxin TEQ by the immunoassay for sediments. The immunoassay method for sediment analysis offers improvement in speed, sample throughput, and cost in comparison to GC–HRMS. Dioxins were determined in serum samples after a simple liquid–liquid extraction and solvent exchange into DMSO–Triton X-100 without further dilution. The current method (approximate method LOQ of 200 pg ml⁻¹ serum) is not sufficiently sensitive for the determination of dioxins in serum to measure acceptable exposure limit.     

Determination of Ultratrace Amounts of Copper(Ⅱ) in Water Samples by Electrothermal Atomic Absorption Spectrometry After Cloud Point Extraction

A novel approach was developed for the determination of ultratrace amounts of copper in water samples by using electrothermal atomic absorption spectrometry (ETAAS) after cloud point extraction (CPE). 1-( 2-Pyridylazo)-2-naphthol was used as the chelating reagent and Triton X-114 as the micellar-forming surfactant. CPE was conducted in a pH 8.0 medium at 40 ℃ for 10 min. After the separation of the phases by centrifugation, the surfactant-rich phase was diluted with 1 mL of a methanol solution of 0. 1 mol/L HNO3. Then 20 μL of the diluted surfactant-rich phase was injected into the graphite furnace for atomization in the absence of any matrix modifier. Various experimental conditions that affect the extraction and atomization processes were optimized. A detection limit of 5 ng/L was obtained after preconcentration. The linear dynamic range of the copper mass concentration was found to be 0-2.0ng/mL, and the relative standard deviation was found to be less than 3.1% for a sample containing 1.0 ng/mL Cu(Ⅱ). This developed method was successfully applied to the determination of ultratrace amounts of Cu in drinking water, tap water, and seawater samples.