Collisions and Fracture: a 1-D Theory. How to Tear off a Chandelier from the Ceiling

When a plate falls on the ground, it breaks. We study this phenomenon at the macroscopic level. We restrict ourselves to 1-D problems and illustrate the theory with a chandelier to which a falling stone is tied. The collisions are assumed instantaneous. Percussions are introduced at the unknown fracture points. Equations of motion and constitutive laws give a set of differential equations, whose corresponding variational problem may be solved in SBV (special functions of bounded variation). The example shows how the theory applies and gives realistic results.     

Ultrasonic Broadband Spectrometry of Liquids A Research Tool in Pure and Applied Chemistry and Chemical Physics

This review is a survey of the many scientific applications of ultrasonic broadbandspectrometry (absorption and velocity measurements with coherent sound waves)in liquids and liquid systems, covering, at present, a frequency range from nearly10 kHz to 10 GHz. Ultrasonic spectrometry has proved to be an almost universalresearch tool in many laboratories, one that is useful for investigation of variouschemical, biochemical, and physicochemical systems. Sound waves traversingliquids induce periodic perturbations in pressure and temperature, which can shiftequilibria, resulting in characteristic sound absorption and velocity dispersionspectra. An analysis of such spectra yields valuable information about thermodynamic and kinetic parameters of the particular system that is often difficult toobtain by other methods. Since such periodic perturbations imposed on the systemare incremental in nearly all cases, the system can be studied under equilibriumconditions. All nonlinear effects (heating, nonconstant fluid compressibility, andothers) are negligible, permitting, for instance, the application of linearized rateequations. In this review, various examples of measured broadband spectra arepresented. Related elementary processes are discussed. Among these are ionicand molecular reactions, including mechanisms of association and complexation,proton transfer, solvation, isomerization, interconversion, side-group rotation,hydrogen-bonding, as well as stacking processes and micelle formation. Specialattention will be given to the extensive research on chemical relaxation.Fundamental early and recent publications are cited and discussed. Many referencesare included with particular emphasis on less well known research and publicationsfrom countries of the former USSR. This review aims at a demonstration of thewidespread applications of modern ultrasonic techniques in many fields ofliquid-state research.     

Ternary eutectic growth of Ag-Cu-Sb alloy within ultrasonic field

The liquid to solid transformation of ternary Ag42.4Cu21.6Sb36 eutectic alloy was accomplished in an ultrasonic field with a frequency of 35 kHz, and the growth mechanism of this ternary eutectic was examined. Theoretical calculations predict that the sound intensity in the liquid phase at the solidification interface increases gradually as the interface moves up from the sample bottom to its top. The growth mode of (ε θ Sb) ternary eutectic exhibits a transition of "divorced eutectic- mixture of anomalous and regular structures-regular eutectic" along the sample axis due to the inhomogeneity of sound field distribution. In the top zone with the highest sound intensity, the cavitation effect promotes the three eutectic phases to nucleate independently, while the acoustic streaming efficiently suppresses the coupled growth of eutectic phases. In the meantime, the ultrasonic field accelerates the solute transportation at the solid-liquid interface, which reduces the solute solubility of eutectic phases.     

基于小波变换的岩石超声波检测信号的研究

介绍了小波变换的基本概念和特性.通过对岩石超声波检测信号的小波分析和处理,表明该方法在奇异信号检测和局部化分析方面具有优异特性.     

摆动式声多普勒效应实验仪

针对现有的声多普勒效应实验装置中存在的问题,设计并制作了摆动式声多普勒效应实验仪.该仪器能够分别进行声源运动和观察者运动的声多普勒效应实验,且可定量分析频偏和测量速度.本文详细介绍了该仪器的原理、构造、特点和实验过程,并对实验结果进行了较为全面的分析.     

简谈空气中的声速与温度关系

讨论了驻波法测空气中声速的实验,分别用相位比较法和李萨如图法来确定超声波波长.在不同温度条件下测量了声速并与理论值进行比较,实验结果显示测量温度接近室温时实验值与理论值基本一致,测量温度与室温相差较大时实验值与理论值偏差较大.     

The development of recent high-power ultrasonic transducers for Near-well ultrasonic processing technology

With the reduction of crude oil throughout the world, enhance oil recovery technology has become a major oil research topics, which can greatly increase the recovery ratio of the crude oil before the dawning of renewable energy era. Near-well ultrasonic processing technology, as one new method, has attracted more attention for Enhanced Oil Recovery due to its low cost, good applicability and no environmental pollution in recent rears. There are two important relevant aspects about Near-well ultrasonic processing technology: (a) how to enhance the oil flow through the rocks into the pumping pool and (b) how to reduce the oil viscosity so that it can be easier to pump. Therefore, how to design a high-power ultrasonic equipment with excellent performance is crucial for Near-well ultrasonic processing technology. In this paper, recent new high-power ultrasonic transducers for Near-well ultrasonic processing technology are summarized. Each field application of them are also given. The purpose of this paper is to provide reference for the further development of Near-well ultrasonic processing technology.With the reduction of crude oil throughout the world, enhance oil recovery technology has become a major oil research topics, which can greatly increase the recovery ratio of the crude oil before the dawning of renewable energy era. Near-well ultrasonic processing technology, as one new method, has attracted more attention for Enhanced Oil Recovery due to its low cost, good applicability and no environmental pollution in recent rears. There are two important relevant aspects about Near-well ultrasonic processing technology: (a) how to enhance the oil flow through the rocks into the pumping pool and (b) how to reduce the oil viscosity so that it can be easier to pump. Therefore, how to design a high-power ultrasonic equipment with excellent performance is crucial for Near-well ultrasonic processing technology. In this paper, recent new high-power ultrasonic transducers for Near-well ultrasonic processing technology are summarized. Each field application of them are also given. The purpose of this paper is to provide reference for the further development of Near-well ultrasonic processing technology     

用等值宽度法测量fs脉冲宽度

本文提出利用等值宽度测量fs光脉冲持续时间的方法.给出了脉冲形状为sech~2 (t/T)、exp(-2t~2/T~2)和exp(-2|t|/T)的干涉相关曲线上包络与相应二阶强度相关曲线半宽度等值的位置,它们分别是3.984、4.875和4.928.定义了两种相关测量的临界延迟速度.理论分析与实验结果符合得很好.所得结果表明,该测量方法可将常规超短脉冲相关测量的时间分辨率提高几倍至几十倍.     

An accurate finite element scheme with moving meshes for computing 3D‐axisymmetric interface flows

An accurate finite element scheme for computing 3D‐axisymmetric incompressible free surface and interface flows is proposed. It is based on the arbitrary Lagrangian Eulerian (ALE) approach using free surface/interface‐resolved moving meshes. Key features like the surface force, consisting of surface tension and the local curvature, and jumps in the density and viscosity over different fluid phases are precisely incorporated in the finite element formulation. The local curvature is approximated by using the Laplace–Beltrami operator technique combined with a boundary approximation by isoparametric finite elements. A new approach is used to derive the 3D‐axisymmetric form from the variational form in 3D‐Cartesian coordinates. Several test examples show the high accuracy and the robustness of the proposed scheme. Copyright © 2007 John Wiley & Sons, Ltd.     

Theoretical assessment of the errors involved in ultrasonic location and sizing of molten weld pools

Ultrasonic transit times may be used to locate the interface between molten weld metal and parent plate as a weld is formed. These transit times will lead to errors in interpretation of the location of the weld interface if account is not taken of the variation of ultrasonic velocity with temperature. We assess the magnitude of these errors using a theoretical model based on the Green's function to obtain the temperature distribution at any time and then convert the temperatures into elastic constants through empirical fits to high temperature data. A ray tracing method and a semi-analytical approach are used to estimate the effects of the changes in elastic constants on the ray paths and transit times. From these theoretical predictions we conclude that the location errors incurred by assuming ultrasonic velocities appropriate to cold metal are less than 0.5 mm for a 3.5 mm radius weld in austenitic steel or in iron. Experimental values tend to be larger than this, possibly suggesting that the solid-liquid interface is not as perfect as in the theoretical model. Under all of the conditions investigated, predicted errors are smaller with compression waves than with shear waves.