气相色谱/质谱测定皮革及其制品中乙二醇醚类有机溶剂的残留量

建立了同时测定皮革及其制品中12种乙二醇醚类有机溶剂残留量的气相色谱/质谱-选择离子监测方法。以乙酸乙酯为萃取溶剂,在45℃下超声萃取皮革及其制品中的乙二醇醚类有机溶剂,萃取液经固相萃取柱净化后进行气相色谱/质谱-选择离子监测法测定,外标法定量。在信噪比（S/N）=3的条件下,乙二醇单乙醚（EGEE）的检出限为0.10 mg/kg,其余11种乙二醇醚类有机溶剂的检出限均小于0.05 mg/kg。在3个加标水平下,该方法的平均加标回收率为81.2%~95.5%,相对标准偏差（RSD）为1.4%~6.6%（n=9）。该方法简便快捷,灵敏度高,检出限远远低于欧盟法规《化学品的注册、评估、授权和限制》（REACH）的限量要求,适用于皮革及其制品中乙二醇醚类有机溶剂残留量的测定,为制定相关检测标准提供了参考。     

热水提取与超声提取的麦冬多糖结构与构象特征的比较研究

利用热水与超声提取麦冬粗多糖,DEAE-cellulose52纤维素与Sephacryl S-300凝胶柱层析对其进行分离纯化,得到热水提取的麦冬多糖均一组分WPOJ-DS与超声提取的麦冬多糖均一组分UPOJ-DS。采用高效液相色谱法、气相色谱法、红外光谱法、部分酸水解、甲基化分析及核磁共振对WPOJ-DS与UPOJDS的结构进行表征;利用刚果红实验、圆二色谱实验及原子力显微镜对其溶液构象进行了比较研究。结果表明,超声提取对麦冬多糖的分子量、单糖组成摩尔比及构型会产生影响,WPOJ-DS与UPOJ-DS的主链均主要由→6)-D-Glcp(1→和→3,6)-D-Glcf(1→组成,但WPOJ-DS中存在→6)-β-D-Glcp(1→,而UPOJDS中没有;刚果红实验、圆二色谱实验与原子力显微镜结果显示UPOJ-DS存在螺旋结构,而WPOJ-DS没有;且在不同溶液环境中,WPOJ-DS与UPOJ-DS的溶液构象不同。     

单相旋转型驻波超声电机的数学模型及仿真

尽管单相驱动的旋转型驻波超声电机的原理样机早巳研制成功，但对这类电机的运动机理的研究却一直局限在定性分析上。本文将从能量角度，根据Hamilton变分原理，定、转子摩擦界面采用纯滑动模型建立了该种电机的数学模型；并根据此模型，用MATLAB语言作了计算机仿真，得到了该种电机的开、关过程动态响应。     

La0.7Ca0.3Mn1-xCrxO3的激光超声研究

运用激光超声的方法测定了五种不同掺杂的巨磁锰氧化物La0.7Ca0.3Mn1-xCrxO3(0.01≤x≤0.60)室温(300 K)下的超声纵波声速.结合热导率的数据,对声速随掺杂浓度的变化原因进行了深入的分析.得到在顺磁绝缘态Cr3 离子的掺入造成了晶格局部涨落的变化,低掺杂使得晶格局部涨落增强,声子U散射弛豫时间减小.     

Polycarbonate nanoparticles spray coated on silicon substrate using micro-electromechanical-systems-based high-frequency ultrasonic nozzle

Mono-disperse polycarbonate (PC) nanoparticles 20 nm in diameter was spray coated on silicon substrate using a novel high-frequency ultrasonic nozzle. Specifically, Bisphenol-A polycarbonate with a molecular weight (M_w) of approximately 6.4 × 10⁴ g/mol was first dissolved in pyridine. The resulting solution was sprayed into surfactant-containing de-ionized (DI) water using a 300 kHz silicon-based multiple-Fourier horn nozzle (MFHN). As pyridine was extracted into the water, PC nanoparticles formed but remained dispersed. This suspension of PC nanoparticles was then sprayed onto a silicon substrate using a 500 kHz 3-Fourier horn nozzle. Scanning electron microscopy (SEM) of the dried substrate revealed that PC nanoparticles were spread uniformly with no aggregation.     

Influence of temperature on thermodynamic properties of substituted aromatic compounds

This work presents experimental liquid densities and ultrasonic velocities for a collection of substituted aromatic compounds (isobutylbenzene, 1,3,5-trimethylbenzene, butylbenzene, isopropylbenzene, p-xylene, m-xylene and o-xylene) at the range of temperature 278.15–323.15 K and atmospheric pressure of a collection of halogenated and aromatic hydrocarbons. Fitting equations were applied to data in order to correlate for later computer-based design. The estimation of the studied properties was made by the application of different theoretical procedures. An equation of state based on the generalised Van der Waals theory which combines the Staverman–Guggenheim combinatorial term of lattice statistics with an attractive lattice gas expression and the free length theory (FLT) showed a good response at the studied conditions.     

Group Representation of Waves in Gyrotropic Crystals

A new group (linear) representation of the propagation of waves in properly and naturally gyrotropic crystals in the general case where the nonreciprocity effect takes place has been developed. Simple expressions of the dependence of ray (group) velocities and polarization vectors of isonormal waves on the complex vector of principal velocities dual to the unitary tensor by which the optical properties of crystals are directly characterized have been obtained. The relationship between gyrotropy and anisotropy and the dipole moment and displacement current induced by the radiation in the crystal has been established. It is shown that the presence of gyrotropy and nonlinear polarization of radiation together with the elimination of conical points entails a phase ambiguity of the ray velocity of the quantummechanical type and a smearing and layering of the wave surface, as well as a discreteness of the spectrum of velocity values of isonormal waves.     

用来激励高频超声换能器的电激励源

讨论了超声换能器的几种激励方法，分析了三种常用激励方法在激励高频超声换能器时的特点及其同局限性，我们雪崩ＭＡＲＸ电路制作的单极窄脉冲能地激励率高达１００ＭＨｚ的换能器并取得了较好的结果。     

Elastic constants of lead-bismuth alloys

A study of ultrasonic velocities and internal friction has been carried out in Pb-Bi alloys in the concentration range of 0 to 49.5 atomic % Bi using the composite oscillator technique. From the velocity and density data a set of elastic constants namely, Young’s modulus, rigidity modulus, bulk modulus and Poisson’s ratio are estimated. The results are interpreted in terms of the phase changes occurring in the alloy system. Internal friction is found to be more sensitive than the elastic constants to the phase changes.     

A methodology for structural health monitoring with diffuse ultrasonic waves in the presence of temperature variations

Diffuse ultrasonic waves for structural health monitoring offer the advantages of simplicity of signal generation and reception, sensitivity to damage, and large area coverage; however, there are the serious disadvantages of no accepted methodology for analyzing the complex recorded signals and sensitivity to environmental changes such as temperature and surface conditions. Presented here is a methodology for applying diffuse ultrasonic waves to the problem of detecting structural damage in the presence of unmeasured temperature changes. This methodology is based upon the prediction and observation that the first order effect of a temperature change on a diffuse ultrasonic wave is a time dilation or compression. A multi-step procedure is implemented to (1) record a set of baseline waveforms from the undamaged specimen at temperatures spanning the expected operating range, (2) select a waveform from the baseline set whose temperature is the closest to that of a subsequently measured signal, (3) adjust this baseline waveform to best match the signal, and (4) calculate an error parameter between the signal and the adjusted waveform and compare this parameter to a threshold to determine the structural status. This procedure is applied to experimental data from aluminum plate specimens with artificial flaws. Probability of detection and the minimum flaw size detected are presented as a function of the size of the baseline waveform set. It is shown that a probability of detection of over 95% can be achieved with a small number of baseline waveforms.