On the Hydrolytic Stability of Organic Ligands in Al-, Ti- and Zr-Alkoxide Complexes

The complexation degrees of Al-, Ti- and Zr-butoxide (M) with unsaturated and saturated -diketones (3-allylpentane-2.4-dione-APD, acetylacetone-ACAC) and -ketoesters (methacryloxyethyl-acetoacetate-MEAA, allylacetoacetate-AAA, ethylacetoacetate-EAA) as organic ligands (L) were examined by IR and ¹³ C NMR spectroscopy and were found to be L:M 1.5. The hydrolytic stability of the ligands of the metal alkoxide complexes (L:M = 1) during hydrolysis/condensation reactions at the molar ratio h (H₂O : OR) = 0.5–2.0 decreases with increasing H$$₂O:complex ratio. Furthermore, the ligand stability depends on the type of metal in the complexes and decreases in the order Al- > Zr- > Ti-butoxide complexes at h=1. The ACAC ligand likewise shows in the Al-, Ti- and Zr-butoxide complexes a high hydrolytic stability (95–100%) at h=1 within 7 days. The Ti- and Zr-butoxide complexes with -ketoesters as ligand show at h=1> a release to a different extent e.g., up to 60% in the case of the MEAA-ligand in the Ti-butoxide complex after 2 days. In general, the hydrolytic stability of the ligands in the Ti-butoxide complexes (L:M = 1, h=1) decreases in the order ACAC > APD > AAA > EAA MEAA. The hydrolysis/condensation reaction of complexes having a weak ligand stability leads to larger particle sizes in the sols than those with stable ACAC ligands. The results contribute to a more controlled synthesis of sols and of new inorganic-organic hybrid polymers via the sol-gel process.     

Thermocapillary Alignment of Gas Bubbles Induced by Convective Transport

The effect of a weak convective heat transfer on the thermocapillary interaction of two bubbles with an arbitrary orientation relative to an externally imposed temperature gradient is examined. Asymptotic analysis of the case of large separation distances, Z, suggests that the corrections to the bubbles' velocities are of (Pe/Z²), rather than (Pe²) previously found for an isolated bubble. Equal-sized bubbles are known to move with the same velocities, as if they were isolated, when heat conduction is the only transport mechanism. However, the convective transport results in a relative motion of the bubbles. The tendency of equal bubbles to line up in a plane perpendicular to the applied thermal gradient is shown analytically in the weakly nonlinear limit of small Pe numbers, and an interesting interaction behavior in the case of unequal bubbles is discussed.     

Effect of Variant Counterions on Stability and Particle Size of Silica Sol

The effects of variant counterions with ionic strength of 0.05, 0.10, 0.20 and 0.25 mol·kg^-1 on the stability and particle size of silica sols have been studied using the traditional methods of Ubbelohde viscosity measurement, TEM and titration respectively, finding that the stability and particle size of the silica sols are all concerned with the acidic, positively electric properties and the sizes of the counterions, as well as the attraction between the counterions and surface silicon hydroxyl groups of the silica sols. The small positively charged counterions lead to the decrease in particle sizes, making the silica sol the most stable. But the larger weakly acidic counterions can restrict the particle sizes of the silica sols and easily make the sols coagulate. It was also found that there existed a linear relationship between log r and log η, which has not ever been reported. The effect of temperature on the stability and particle sizes was also discussed.     

DIFFUSION OF LONG CHAINS THROUGH A POROUS THIN GEL NETWORK

Using a core(142 nm)made of linear polystyrene(PS)chains as a seed,we further polymerized a thin layer of cross-linked PS shell(7 nm)on it in water to form a core-shell particle.Such a particle swells in toluene,which enables linear PS chains inside the core to gradually diffuse out through the porous shell.Using a combination of static and dynamic laser light scattering,we examined the chain diffusion process by following the change of the scattering intensity(i.e.the average molar mass of the particles).For the first time,we have revealed that the diffusion exhibits three stages.In the first stage,the chain diffusion through the shell is even faster than their translational diffusion in a dilute solution.The three stages respectively correspond to the change of the solution in the core from concentrated to semidilute and then from semidilute to dilute.     

Template functions of particle monolayers on hydrophobic solid substrates

The template function of cationic particle monolayers bearing quaternary ammonium groups on their surfaces towards anionic colloids was investigated in this paper. Monodispersed cationic polymer particles having quaternary ammonium groups were self-organized on octadecylated glass plates through hydrophobic interaction. The morphology of the resulting particle monolayers was changed by tuning hydrophilic–hydrophobic balance of particles to fabricate aggregated type and dispersed type of particle monolayers. Gold and silver colloids were selectively deposited onto the particle monolayers through electrostatic interaction. The deposited gold and silver colloids on particle monolayers showed plasmon absorbance. Fluorescent silica colloids were also selectively deposited on particle monolayers to permit fluorescence labeling of the particle monolayers. Cationic particle monolayers fabricated on hydrophobic solid octadecylated were found to effectively work as templates for the deposition of above mentioned inorganic colloids.     

Operation of the quasi-optical gyrotron at harmonics of the gyrofrequency

This paper investigates the performance of a quasioptical gyrotron, when the electron beam interacts with the radiation fields at harmonics of the gyrofrequency. The nonlinear equations of motion are obtained in the slow-timescale. The expression for the linear gain is derived and the conditions for excitation are given (frequency threshold, optimal operating point, bean current and resonator quality thresholds). In the nonlinear regime, it is shown that maximum efficiencies comparable to those at the fundemental (50%) are possible, albeit at a prohitively high radiation field amplitude, while realistically feasible field amplitudes can give somewhat smaller, but nevertheless still high efficiencies (15%). Finally, the results are suplemented by empirical scaling laws, useful for experimental designs.     

Estimating reaction parameters in mechanism-enabled population balance models of nanoparticle size distributions: A Bayesian inverse problem approach

In order to quantitatively predict nano- as well as other particle-size distributions, one needs to have both a mathematical model and estimates of the parameters that appear in these models. Here, we show how one can use Bayesian inversion to obtain statistical estimates for the parameters that appear in recently derived mechanism-enabled population balance models (ME-PBM) of nanoparticle growth. The Bayesian approach addresses the question of “how well do we know our parameters, along with their uncertainties?.” The results reveal that Bayesian inversion statistical analysis on an example, prototype nanoparticle formation system allows one to estimate not just the most likely rate constants and other parameter values, but also their SDs, confidence intervals, and other statistical information. Moreover, knowing the reliability of the mechanistic model's parameters in turn helps inform one about the reliability of the proposed mechanism, as well as the reliability of its predictions. The paper can also be seen as a tutorial with the additional goal of achieving a “Gold Standard” Bayesian inversion ME-PBM benchmark that others can use as a control to check their own use of this methodology for other systems of interest throughout nature. Overall, the results provide strong support for the hypothesis that there is substantial value in using a Bayesian inversion methodology for parameter estimation in particle formation systems.     

Self-organization of polymer particles on hydrophobic solid substrates in aqueous media. II. Self-organization of cationic polymer particles on polymer films and wettability control with particle monolayers

Self-organization of cationic polymer particles through hydrophobic interaction on polymer films in aqueous system and characteristic properties of the resulting particle monolayers were investigated. Cationic polymer particles bearing quaternary ammonium groups on their surfaces effectively self-organized on polymer films. With an increase of the particle surface charge density, the surface coverage and average aggregate size (N _a) decreased. The surface coverage control was accomplished by tuning the ionic strength of the media. The wettability of polymer films for water was imparted by the formation of particle monolayers on them. Annealing of the particle monolayers resulted in the increase of the adhesive strength, while the wettability for water was lost. Further improvements of both wettability and adhesive strength of particle monolayers were achieved by the immobilization of silica colloids on the particle monolayers. This method would be effective for the hydrophilization of polymer films.     

ToF‐SIMS observation of PTFE surfaces modified by α‐particle irradiation

The surface structure of polytetrafluoroethylene (PTFE) upon α‐particle irradiation has been investigated at doses in the range of 1 × 10⁷ to 1 × 10¹¹ Rad and compared with the surface structure of the unirradiated polymer. Both neat and 25% fiberglass content PTFE were studied. The samples, maintained at nominal room temperature, were irradiated in vacuum by 5.5 MeV ⁴He²⁺ ions generated in a tandem accelerator beam line. Static time‐of‐flight SIMS (ToF‐SIMS) was employed to probe chemical changes at the surface as a function of the irradiation level. In general, the data are indicative of increased cross‐linking at α‐doses less than 1 × 10⁹ Rad, followed by increased fragmentation and unsaturation at α‐doses greater than 1 × 10⁹ Rad. Throughout the irradiation regime, scission is a constant factor promoting cross‐linking, branching, and unsaturation. However, at α‐doses greater than 1 × 10¹⁰ Rad, extreme structural degradation of the polymer becomes evident and is accompanied by conversion to oxygen‐functionalized and aliphatic compounds. Thus, for PTFE in an α‐particle field, an upper exposure limit of ～10¹⁰ Rad is essential for nominal retention of molecular structure. Finally, a quantitative relationship between α‐dose and characteristic fragment ion intensity is developed. Copyright © 2005 John Wiley & Sons, Ltd.     

Characterisation of River Po particles by sedimentation field-flow fractionation coupled to GFAAS and ICP-MS

A procedure for elemental composition determination of water-borne river particles (Po River) on both size-fractionated and unfractionated submicron particles (0.1–1 μm) by graphite furnace atomic absorption spectroscopy (GFAAS) and inductively coupled plasma-mass spectrometry (ICP-MS) is reported. Sample fractionation was performed using sedimentation field-flow fractionation (SdFFF). The distribution of relative mass vs. particle size was determined using UV detection. Fractions were collected over a narrow size range for scanning electron microscopy. With this combination of techniques the mass, elemental composition, and shape distributions can be obtained across the size spectrum of the sample.

The size distributions of the major elements (Al, Fe) were determined by coupling both GFAAS and ICP-MS techniques to the SdFFF. The procedure was validated using a reference clay sample. Satisfactory agreement was found between both the GFAAS and ICP-MS aluminium signal and the UV detector signal. Some discrepancies were observed in the Fe/Al ratios when comparing GFAAS and ICP-MS. Thus further investigation is in order to fully assess the role of SdFFF-ICP-MS and SdFFF-GFAAS techniques for elemental characterisation of aquatic colloids. Both GFAAS and ICP-MS signals unambiguously indicate a significantly higher Fe content in the lower size range, which is consistent with previous investigations.

Trace element levels in unfractionated Po River particles, determined by both GFAAS and ICP-MS, show good agreement. The high levels of Cu, Pb, Cr and Cd found associated with the colloidal particles underlines the significance of the environmental role played by the suspended matter in rivers in both highly industrialised and intensively cultivated areas.