Cadmium colloids from non-aqueous solvents

Cadmium colloids have been prepared by Chemical Liquid Deposition (CLD). The metal is evaporated to yield atoms which are solvated at liquid nitrogen temperature, and upon warming, stable liquid colloids are formed with particle size ranging between 25–100 Å. Zeta potentials were calculated according to the conversion of Hunter and the Hückel equation, for ethanol and dimethyl sulphoxide. UV/VIS measurement of most of the black colloids showed absorption band around 280 nm. For comparison, we prepared CdS colloid with size 400–625 Å. The colloids are stable to oxidation in air and/or oxygen bubbling. The synthesis of colloids and films from Cd with acetone, 2-butanone, ethanol, 2-propanol, 2-methoxyethanol, DMF and DMSO is reported. Transmission Electron Microscopy (TEM) allows us to determine particle size.     

Synthesis and characterization of well-defined poly(methyl methacrylate)/CaCO3/SiO2 three-component composite particles via reverse atom transfer radical polymerization

The attempt to prepare structurally well-defined polymer/inorganic composite particles, i.e., poly(methyl methacrylate) (PMMA)/CaCO₃/SiO₂ three-component composite particles, via reverse atom transfer radical polymerization (ATRP), using 2-2′-azo-bis-isobutyronitrile as initiator and Cu(II) bromide as catalyst was reported. CaCO₃/SiO₂ two-component composite particles were first obtained through sol–gel method, and their morphology and surface element information were determined by transmission electron microscopy and X-ray photoelectron spectroscopy, respectively. The results indicate that the CaCO₃ was encapsulated by the obtained SiO₂. After being modified by silane coupling agent, the CaCO₃/SiO₂ composite particles copolymerized with methyl methacrylate (MMA) under standard reverse ATRP conditions to produce PMMA/CaCO₃/SiO₂ three-component composite particles. In the case concerned, first-order kinetic plots and linear increase of molecular weight (Mn) vs conversion and narrow molecular weight distribution for the graft polymer samples were observed. Furthermore, the gel permeation chromatography results illustrated that both the free PMMA chains from the solvent and the graft PMMA chains from the surface of CaCO₃/SiO₂ two-component composite particles were growing at the same rate. Characterizations of the PMMA-grafted CaCO₃/SiO₂ composite particles were done by Fourier transform infrared and thermogravimetric analysis. The results showed that the surface of the modified inorganic particles was grafted by the MMA and that the grafting percentage was about 8.7%.     

纳米级TiO2粉体的制备研究——Ⅱ.絮凝剂及其浓度的影响

采用溶胶-凝胶-超临界流体干燥(SCFD)法制备纳米级TiO₂超细粉，详细考察了不同絮凝剂及其浓度对TiO₂织构和结构性质的影响。结果表明，利用强碱溶液作为絮凝剂，浓度为5 mol·L^-1是制备大孔高比表面TiO₂超细粉较为适宜的条件。     

A competitive particle nucleation mechanism in the polymerization of homogenized styrene emulsions

The effects of concentrations of surfactant (sodium lauryl sulfate [SLS]) and initiator (sodium persulfate [SPS]) on the polymerization of homogenized styrene emulsions, stabilized by SLS/lauryl methacrylate (LMA) or SLS/stearyl methacrylate (SMA), were studied. The rate of polymerization increases with increasing [SLS] or [SPS]. In addition to monomer droplet nucleation, the formation of particle nuclei in the aqueous phase (homogeneous nucleation) plays a crucial role in the polymerization kinetics. In comparison with the LMA containing polymerization system, monomer droplet nucleation becomes more important when the more hydrophobic SMA was used as the costabilizer. Furthermore, the degree of homogeneous nucleation increases with increasing [SPS].     

Fracture mechanisms in rigid core-shell particle modified high performance epoxies

The fracture mechanisms of a high performance epoxy system modified with two types of preformed rigid core-shell particles (RCSP) were investigated. The use of the preformed RCSP anables the control of the dispersion of the toughener phase in the epoxy, which, in turn, allows the mechanical properties of the modified epoxy to be optimized. The toughening effect via the RCSP modification is found to be as good as that via the core-shell rubber modification. The moduli andT _g of these RCSP-modified epoxies are virtually unaltered via the RCSP modification, when compared with the neat epoxy resin equivalent. The toughening mechanisms in these toughened systems appear to be predominantly crack deflection, crack bifurcation, and microcracking. Approaches for effective toughening of high performance polymers via rigid polymers are discussed.     

单分散二氧化钛超微粒子的制备

以四丁氧基钛为原料，采用溶胶－凝胶法制备了超微二氧化钛粉末．改变热处理气氛、升温速率、水与四丁氧基钛的摩尔比以及溶剂，分别得到７ｎｍ球形单相锐钛矿以及四方形（４０ｎｍ×１０ｎｍ）、球形（４４ｎｍ）的主相金红石超微粒子．     

1H-NMR Relaxation of Water Molecules in the Aqueous Microcrystalline Cellulose Suspension Systems and Their Viscosity

An intensive study for aqueous microcrystalline cellulose (MCC) suspensions was carried out in view of the relationship between a viscosity and a 1H spin-spin relaxation time (T2) of water. An investigation was carried out for four suspension systems with the different particle size distributions. The proton mole ratio () of bound water against MCC particles and T2 of bound water (T2,b) were evaluated from the T2 values obtained by Carr-Purcell- Meiboom-Gill (C.P.M.G) method and those by solid echo method, respectively. As a result of these analyses, the T2,b value for the aqueous MCC suspension was evaluated as 5 × 10–3 s and it was found that the system having a larger tended to show a higher viscosity. By relating the above results to the observation of the suspensions by an optical microscope, it was concluded that a network formed by MCC particles plays an important role in generating a high viscosity of MCC suspension, and that an averaged mobility of water molecules is sensitively affected by the network structure.     

Laser Doppler anemometry under plasma conditions. Part II. Measurements in an inductively coupled r.f. plasma

Laser Doppler anemometry is used for the measurements of the plasma and particle velocity profiles in the coil region of an inductively coupled r.f. plasma. Results are reported for a 50 mm i.d. induction plasma torch operated at atmospheric pressure with argon as the plasma gas. The oscillator frequency is 3 MHz and the plate power is varied between 4.6 and 10.5 kW. Plasma velocity measurements are obtained using a fine carbon powder as a tracer. Measurements are also given for larger silicon particles ( ) centrally injected into the discharge under different operating conditions.Nomenclature d _p particle diameter - P ₀ plasma power - Q ₁ powder carrier gas flow rate - Q ₂ plasma gas flow rate - Q ₃ sheath gas flow rate - r distance in the radial direction - V axial plasma velocity - V _p axial particle velocity - Z distance in the axial direction - standard deviation     

Cation-crown ether complex formation in water. II. Alkali and alkaline earth cations and 12-crown-4, 15-crown-5, and 18-crown-6

The stability constants and the partial molal volume and isentropic partial molal compressibility changes of complex formation between cations and crown ethers in water at 25°C are presented. The cations involved are Na⁺, K⁺, Rb⁺, Cs⁺, Ca²⁺, and Ba²⁺, and the crown ethers are 12-crown-4, 15-crown-5, and 18-crown-6. Values of V of complex formation have been discussed in terms of two simple models, one based on the scaled particle theory, and the others on the Drude-Nernst continuum model. The results indicate that the charge of the potassium cation in 18-crown-6 is especially well screened from the water. On this basis hydration numbers of complexed cations have been calculated. This shows that the size of the cation compared to the crown ether hole is important for the contacts between complexed cations and water.     

类球形正交LiMnO2的制备、微结构和电化学性能

以共沉淀法得到的类球形MnCO₃为前驱物，制备了类球形正交LiMnO₂(So-LiMnO₂)，采用XRD、SEM和N₂吸附技术对样品进行表征；与非球形正交LiMnO₂(No-LiMnO₂)进行了对比研究。结果表明：o-LiMnO₂的堆垛层错度、结晶状况、颗粒形貌和大小与前驱物的微结构密切相关；在80次电化学循环测试过程中，So-LiMnO₂经15次循环可达最大的放电容量152 mAh·g^-1，其容量衰减平均每次循环0.58 mAh·g^-1；而No-LiMnO₂要经过38次循环才能达到最大放电容量128 mAh·g^-1，容量衰减平均每次循环高达1.24 mAh·g^-1。TEM和EDS分析证明：由一次粒子团聚的类球形So-LiMnO₂能有效地抑制电解液对材料的腐蚀、减少Mn的溶解，从而提高了电化学循环能力。