Ultrafine grain formation and coating mechanism arising from a blast coating process: A transmission electron microscopy analysis

This article examines the substrate/coating interface of a coating deposited onto mild steel and stainless steel substrates using an ambient temperature blast coating technique known as CoBlast. The process uses a coincident stream of an abrasive blast medium and coating medium particles to modify the substrate surface. The hypothesis for the high bond strength is that the abrasive medium roughens the surface while simultaneously disrupting the passivating oxide layer of the substrate, thereby exposing the reactive metal that then reacts with the coating medium. The aim of this study is to provide greater insight into the coating/substrate bonding mechanism by analysing the interface between a hydroxyapatite coating on both mild and stainless steel substrates. The coating adhesion was measured via a tensile test, and bond strengths of approximately 45 MPa were measured. The substrate/coating interface was examined using transmission electron microscopy and selected area diffraction. The analysis of the substrate/coating interface revealed the presence of ultrafine grains in both the coating and substrate at interface associated with deformation at the interface caused by particle impaction during deposition. The chemical reactivity resulting from the creation of these ultrafine grains is proposed to explain the high adhesive strength of CoBlast coatings.     

Coordination compounds of hydrazine derivatives with transition metals,XXIII cobalt(II) chelates of bis(N-salicylidene)dicarboxylic acid dihydrazides

The reaction of bis(N-salicylidene)dicarboxylic acid dihydrazides (H₄ Lig) with cobalt(II) salts was investigated. Chelates of the types Co(H₃ Lig)X ·nH₂O, Co₂(H₂ Lig)X ₂, Co₃(H₃ Lig)₂ X ₄, Co(H₂ Lig) ·nH₂O and Co(H₃ Lig)₂ ·nH₂O (X=Cl, Br, I or SCN) were isolated and characterized by their infrared and electronic spectra as well as their magnetic properties.

---

Koordinationsverbindungen von Hydrazinderivaten mit Übergangsmetallen, 23. Mitt.: Kobalt(II)-Chelate von Bis(N-salicyliden)dicarbonsäuredihydraziden

Zusammenfassung Die Reaktion von Bis(N-salicyliden)dicarbonsäuredihydraziden (H₄ Lig) mit Kobalt(II)-Salzen ergab Chelate vom Typ Co(H₃ Lig)X ·nH₂O, Co₂(H₂ Lig)X ₂, Co₃(H₃ Lig)₂ X ₄, Co(H₂ Lig) ·nH₂O and Co(H₃ Lig)₂ ·nH₂O (X=Cl, Br, I oder SCN). Die Charakterisierung erfolgte mittels IR, Elektronenspektren und magnetischer Eigenschaften.

     

固相配位化学反应研究——ⅩⅩⅩⅩⅠ.[Co(NH_3)_5(H_2O)]Br_3,[Cr(NH_3)_5(H_2O)](NO_3)_3与无机盐KY(Y=Cl,Br,Ⅰ)的固相反应动力学研究

本文主要用气相色谱逸出气体分析方法,借助于红外、紫外可见漫反射谱等手段研究了[Co(NH_3)_5(H_2O)]Br_3、[Cr(NH_3)_5(H_2O)](NO_3)_3与无机盐KY(Y=Cl,Br,Ⅰ)的固相反应,计算了失水与失氨的动力学参数,发现第一步反应失水生成一取代中间产物,其活化能与外加阴离子无关,为S_N1过程。第二步失氨反应活化能与中心离子M以及取代基Y有关,当M=Co(Ⅲ)时,反应体系的失氨活化能大小有下列顺序:Cl>Br>Ⅰ(E值分别为187、155、98kJ·mol~(-1)),M=Cr(Ⅲ)时则正好相反:Ⅰ>Br>Cl(E值分别为213、146、79 kJ·mol~(-1))。     

两同型部件温贮备可修系统半离散化的研究

利用半离散的方法对两同型部件温贮备可修系统中的函数μ(x)进行离散,得到两个离散的方程,再利用算子半群的理论证明离散后方程的解收敛于原方程的解.     

武汉市在校大学生数与经济增长的协整分析

近二十年来,我国高等教育规模不断扩大,高校在校生数不断增加,其中武汉市位居全国前列．为了研究高校在校生数对当地经济发展的影响,本文利用武汉市1992—2012年在校大学生人数数据,通过建立合适的模型,来定量探讨武汉市在校大学生数与经济增长的内在关系．结果表明,武汉市经济增长与武汉在校大学生人数模型之间存在着长期均衡关系且互为格兰杰因果关系．     

Application of 57Co emission Mössbauer spectroscopy to studying biocomplexes in frozen solutions

Emission Mössbauer spectroscopy with the ⁵⁷Co isotope was used to study very dilute rapidly frozen aqueous solutions of cobalt(II) complexes with low-molecular-weight biomolecules (aromatic amino acids – anthranilic acid and L-tryptophan) and within a sophisticated biopolymer, bacterial glutamine synthetase, a key enzyme of nitrogen metabolism. The appearance of after-effects of the ⁵⁷Co→⁵⁷Fe nuclear transformation as well as the coordination properties of the cation and the ligands in the complexes are discussed on the basis of their Mössbauer parameters.     

Ein Beitrag zur radiometrischen Bestimmung des Ziehsteinverschleißes beim Ziehen von Stahldraht

Es wird ein zuvelässiges und sehr empfindliches radiometrisches Verfahren zur Bestimmung des Ziehsteinverschleiβes beim Ziehen von Stahldraht beschrieben. Im Vergleich zu den in der Literatur angegebenen radiometrischen Meβverfahren ist das behandelte Verfahren weniger zeitaufwending und gestattet es, bei einem vertretbaren Aufwand gröβere Verscuhsreihen durchzuführen. Mit Hilfe dieser Methode ist es möglich, langwierige groβtechnische Versuche zu umgehen und gleichzeitig eine wesentlich exaktere Aussage ūber den Verschleiβ unter verschiedenen Ziehbedingungen zu erhalten.     

Darstellung und Weitergabe der Expositionseinheit Röntgen im DAMW Teil II: Die Hohlraum-Ionisationskammern für 60Co- und 137Cs-γ-Strahlung

Nachdem in ersten Teil der Arbeit eine Beschreibung der Normalmeβeinrichtungen (Freiluft-Ionisationskammern) des DAMW zur Darstellung der Einheit der Exposition für den Energiebereich der Röntgenstrahlung erfolgte, werden hier die entsprechenden Einrichtungen für die Gammastrahlung von ⁶⁶Co und ¹³⁷Cs behandelt. Grundlage für die definitionsgemäβe Bestimmung der Einheit bilden dabei verschidene Hohlraum-Inoisationskammern aus Reinstgraphit, deren Aufbau erläwtert wird. Sie sind vom zylindrischen Typ und haben Meβvolumina von ca. 2 cm³, 8 cm³ cm³ und 100 cm³. Als Ladungsmeβeinrichtung wird ebenfalls ein elektromctrischer Fotozellenkompensator verwendet. Die Bestimmung der in kollimierten Strahlenbündeln notwendigen Korrektionsfaktoren wird im einzelnen behandelt. Der maximale Fehler bei der Darstellung der Einheit der Exposition betrāgt 2%.     

Determining Optimum Conditions for Measuring by Gamma-ray Backscattering

The paper is concerned on the calculation of the optimal thickness of measured material from the point of view of measurement error. The minimum relative error of a measurement is determined as a function of the gamma radiaiton linear attenuation coefficient and the thickness of the material used. Various types of fluctuations are considered and attention is paid to the background detected in the same arrangement without measured material. The results are summarized into simple figures. The conclusion is made that the optimal thickness increases with poorer quality of the measuring instrument.     

Synthesis of multi-walled carbon nanotubes using CoMnMgO catalysts through catalytic chemical vapor deposition

The Co Mg O and Co Mn Mg O catalysts are prepared by a co-precipitation method and used as the catalysts for the synthesis of carbon nanotubes（CNTs） through the catalytic chemical vapor deposition（CCVD）. The effects of Mn addition on the carbon yield and structure are investigated. The catalysts are characterized by temperature programmed reduction（TPR） and X-ray diffraction（XRD） techniques, and the synthesized carbon materials are characterized by transmission electron microscopy（TEM） and thermo gravimetric analysis（TG）. TEM measurement indicates that the catalyst Co Mg O enclosed completely in the produced graphite layer results in the deactivation of the catalyst. TG results suggest that the Co Mn Mg O catalyst has a higher selectivity for CNTs than Co Mg O. Meanwhile, different diameters of CNTs are synthesized by Co Mn Mg O catalysts with various amounts of Co content, and the results show that the addition of Mn avoids forming the enclosed catalyst, prevents the formation of amorphous carbon, subsequently promotes the growth of CNTs, and the catalyst with decreased Co content is favorable for the synthesis of CNTs with a narrow diameter distribution.The Co Mn Mg O catalyst with 40% Co content has superior catalytic activity for the growth of carbon nanotubes.