基于甲醇化学链燃烧的新型燃气轮机间冷循环

本文提出一种新颖的甲醇化学链燃烧动力循环系统.该系统利用空气压缩的间冷热提供甲醇和Fe2O3反应热,将间冷的低温热转换为高品位化学能;同时得到预冷的空气吸收燃烧产物Fe2O3的显热,降低了还原反应的温度.与常规化学链循环相比,该循环利用间冷的热量代替高温Fe2O3的显热提供还原反应的反应热,系统内能量品位匹配更加合理.根据图像(火用)分析方法,阐明了甲醇化学链燃烧过程(火用)损失减少和间冷热品位提升的机理.本文对新循环进行了分析,并以常规化学链循环为参照,研究了其性能.新循环的效率较高,同时可以实现CO2无能耗的分离.     

Hopf Bifurcation Control of a Hyperchaotic Circuit System

This paper is concerned with the Hopf bifurcation control of a new hyperchaotic circuit system. The stability of the hyperchaotie circuit system depends on a selected control parameter is studied, and the critical value of the system parameter at which Hopf bifurcation occurs is investigated. Theoretical analysis give the stability of the Hopf bifurcation. In particular, washout filter aided feedback controllers are designed for delaying the bifurcation point and ensuring the stability of the bifurcated limit cycles. An important feature of the control laws is that they do not result in any change in the set of equilibria. Computer simulation results are presented to confirm the analytical predictions.     

Decomposition of Vocal Cycle Length Perturbations into Vocal Jitter and Vocal Microtremor, and Comparison of Their Size in Normophonic Speakers

A statistical method that enables raw vocal cycle length perturbations to be decomposed into perturbations ascribed to vocal jitter and vocal tremor is presented, together with a comparison of the size of jitter and tremor. The method is based on a time series model that splits the vocal cycle length perturbations into uncorrelated cycle-to-cycle perturbations ascribed to vocal jitter and supra-cycle perturbations ascribed to vocal tremor. The corpus was composed of 114 vocal cycle length time series for sustained vowels [a], [i], and [u] produced by 22 male and 16 female normophonic speakers. The results were the following. First, 100 out of 114 time series were decomposed successfully by means of the time series model. Second, vocal perturbations ascribed to tremor were significantly larger than perturbations ascribed to jitter. Third, the correlation between vocal jitter and vocal tremor was moderate, but statistically significant. Fourth, small but statistically significant differences were observed among the three vowel timbres in the relative jitter and the arithmetic difference of jitter and tremor. Fifth, the differences between male and female speakers were not statistically significant in the relative raw perturbations, the relative jitter, or the modulation level owing to tremor.     

固体吸附式制冷中热波循环的分析研究

1引言由Tehernev博士和S．V．Shelton教授提出的热波循环，是吸附式制冷中引起广泛兴趣的一种循环方式。其特点是高效回热，Shelton采用斜波法［‘］和方波法［‘］分析了热波循环，回热率达70％，热泵工况COP超过1．6。其它学者作了改进研究［‘并热波循环的模拟效果很好，但实验方面进展相当缓慢。采用螺旋板式换热器作吸附器，也发现热波循环的运行效果很不理想问。目前，相关的文献主要是系统模拟，而对其关键，热波的形成、特性研究较少。另外，研究侧重于系统性能（COP），对能量密度（SPD）考虑较少。本文将从传热的角度分析热…     

酵母蛋白质网络的动力学性质

蛋白质-蛋白质、蛋白质-DNA相互作用网络决定了细胞中各种关键功能的执行．基于芽殖酵母(budding yeast saccharomyces cerevisiae)的蛋白质-蛋白质相互作用网络数据和相关的实验文献，我们建立了调控细胞周期和生命周期(cell cycle and life cycle)的蛋白质网络，并利用离散模型研究了该网络的动力学性质，研究表明：细胞周期网络的动力学性质具有很强的稳定性，约94％的蛋白质初态将演化到对应于生物学G1基态的稳定态，使其成为惟一的全局吸引点；同时，绝大多数的初态的演化路径都通过由G1激发态到G1基态的细胞周期演化路径，使细胞周期路径成为全局性的“吸引”路径。     

70K温区混合工质分凝分离循环节流制冷机实验研究

混合工质节流制冷机正在许多方面获得越来越广泛的应用。文中设计了一种新型的混合工质分凝分离循环 ,建立了实验系统 ,并在 70 K温区进行了实验。实验结果表明 ,节流制冷机可以达到 6 5 .3K的低温 ,并在 72 K温度提供 1W的制冷量 ,输入功率为 5 0 0 W。     

微机在热学教学及教学研究中的应用

介绍了应用微机的快速、精确地进行复杂计算并绘制图表的功能，在热学辅助教学及教学研究方面所做的一些工作。     

利用LNG冷(火用)的准零CO2排放循环探析

本文研究利用LNG冷(火用)来完善燃用它的热机性能,既提高了效率,又能回收用LNG燃料热机的唯一主要排放-CO2.这种系统的温度区间横跨大气温度,会有很多新的特点值得探索.作为前期研究,本文建议了两种新循环,分别基于Brayton循环与超临界Rankine循环,且分别适用于LNG超临界及亚临界汽化过程.文中对此两种循环进行了分析计算与讨论,说明建议是可行的,热机效率可达60%以上,且同时基本回收所有燃烧产生的CO2.     

利用重力增压的新型有机工质热力发电循环

与水蒸气朗肯循环给水泵相比,有机朗肯循环工质泵存在技术难度大、效率低、易气蚀和单位功率成本高等问题。本文提出了一种利用重力增压的新型有机工质热力发电循环,冷凝器出口工质不经过泵而依靠重力增压,然后进入蒸发器气化。分别采用R113、R123和R245fa三种干工质分析了不同蒸发温度和冷凝温度下循环所需的重力增压高度。并基于泵的实验数据,比较了该热力循环与泵增压有机朗肯循环的性能。结果表明,相同工作温度下沸点和密度越高的工质所需的重力增压高度越小。在蒸发温度100℃和冷凝温度50℃时,若采用R113,新型循环所需的重力增压高度为22.2 m,热效率为8.1%,比泵增压循环效率高约0 8%。该重力增压循环显示了应用于热电联供领域的潜力。     

A conceptual high flux reactor design with scope for use in ADS applications

A 100 MWt reactor design has been conceived to support flux level of the order of 10¹⁵ n/cm²/s in selected flux trap zones. The physics design considers high enriched metallic alloy fuel in the form of annular plates placed in a D₂O moderator tank in a hexagonal lattice arrangement. By choosing a tight lattice pitch in the central region and double the lattice pitch in the outer region, it is possible to have both high fast flux and thermal flux trap zones. By design the flux level in the seed fuel has been kept lower than in the high flux trap zones so that the burning rate of the seed is reduced. Another important objective of the design is to maximize the time interval of refueling. As against a typical refueling interval of a few weeks in such high flux reactor cores, it is desired to maximize this period to as much as six months or even one year. This is possible to achieve by eliminating the conventional control absorbers and replacing them with a suitable amount of fertile material loading in the reactor. Requisite number of seedless thorium-aluminum alloy plates are placed at regular lattice locations vacated by seed fuel in alternate fuel layers. It is seen that these thorium plates are capable of acquiring asymptotic fissile content of 14 g/kg in about 100 days of irradiation at a flux level of 8 × 10¹⁴ n/cm²/s. In summary, the core has a relatively higher fast flux in the central region and high thermal flux in the outer region. The present physics design envisages a flat core excess reactivity for the longest possible cycle length of 6 months to one year. It is also possible to modify the design for constant subcriticality for about the same period or longer duration by considering neutron spallation source at the centre and curtailing the power density in the inner core region by shielding it with a layer of thoria fuel loading.