SYNTHESIS OF SODALITE BY DRY POWDER METHOD

用新颖的干粉方法合成系列沸石的研究已从五元环沸石延伸到具有四元环和六元环的方钠石。本研究运用干粉方法在Ｎａ２Ｏ－ＳｉＯ２－Ａｌ２Ｏ３混合物中分别以乙醇胺和乙二胺－氟化物为模板，合成出了方钠石。有机模板剂以吸附态模板方式进入体系。用ＸＲＤ数据、扫描电镜图及红外光谱测试结果对实验产品做了表征。结果表明，干粉体系制备的方钠石的晶胞参数小于水热体系和非水体系合成的方钠石的相应值。而以乙醇胺为模板制备的方钠石与以乙二胺－氟化物为模板的样品比较，后者具有较快的晶化速度、较小的晶胞体积和晶粒     

Thermal and mechanical-induced phase transformations during YAG and alumina–YAG syntheses

The preparation of pure Y₃Al₅O₁₂ (YAG) and 50 vol% Al₂O₃–YAG composite powders by a wet chemical route is presented. The role of the synthesis temperature during reverse-strike precipitation has been investigated, showing its relevant effect on the purity and homogeneity of YAG powder. The composite material was prepared by comparing two different synthesis routes. A composite powder was synthesized via reverse-strike temperature-controlled co-precipitation. In the latter case, a pure-alumina precursor was firstly reverse-strike precipitated and then doped with an yttrium salt solution. For both syntheses, the role of thermal and mechanical pre-treatments on the phase development was demonstrated.     

超细粉Pb0.75Ca0.25[(Ni1/3Nb2/3)0.08Ti0.912Mn0.008]O3的制备与表征

报道了用化学共沉淀法制备掺杂Ca、Ni、Nb、Mn钛酸铅超细陶瓷粉末的方法。制得的粉料化学式为:Pb_0.75Ca_0.25[(Ni_1/3Nb_2/3)_0.08Ti_0.912Mn_0.008]O₃,粒径小于0.1μm,所有的掺杂元素均能定量掺入。     

化学发光分析法测定动物蛋白粉等样品中的锰

基于Mn(Ⅱ) 邻菲罗啉对鲁米诺 KIO4化学发光体系的催化作用建立了测定Mn(Ⅱ)的分析方法。Mn(Ⅱ)质量浓度在2.0×10-6～5.0×10-5mg/mL范围与发光强度呈线性响应,回归方程为ICL=0.6+1.39×106ρ(mg/mL),检出限为2.0×10-6mg/mL。Cr3+、Fe2+、Co2+、Au3+等离子有干扰,使用EDTA、F-、8 羟基喹啉等为掩蔽剂可消除或降低干扰。将该法应用于生物化工产品丙酸钙、动物蛋白粉等中痕量锰的测定,加标回收率98%～102%,10次测定RSD为4 6%。将测定的结果与原子吸收法比较,相对偏差≤±3%。     

溶剂萃取法制备Co(PO_3)_2超细微粉

本文用溶剂萃取法成功地制备了偏磷酸钴超细微粉并通过ＸＲＤ，ＩＲ，ＴＧ，ＤＴＡ，ＴＥＭ等实验对超细微粉的组成、结构进行了表征。     

用N2O-C2H2火焰原子吸收光谱法测定羰基镍粉中钼含量

运用了N2O—C2H2火焰原子吸收光谱法进行羰基镍粉钼含量的测定。介绍了钼最佳测定条件及呈良好线性范围的浓度,同时对样品消化处理条件及在测定中样品的干扰因素进行了综合考虑．该方法的相对标准偏差均小于1.0％(n=6)，回收率均在97．0％～102．0％(n=6)之间．达到了实验室分析质量控制的要求．     

High Performance Varistor Discs Obtained from Chemically Synthesized Doped Zinc Oxide Powder

The ceramic microstructure, the chemical homogeneity of specific dopants and the mechanical integrity of a varistor disc are critical parameters in determining the transient voltage suppression features of these devices. The material properties and overall quality of the starting ceramic powders used to produce such components are essential in achieving the desired properties. The present work describes a novel chemical method developed to produce doped zinc oxide powders and an industrial scale manufacturing process for the production of final varistor blocks for surge arrester applications. The results are compared with those obtained when using standard varistor powder made by the mixed oxide route is used. All the fundamental electrical properties of the discs have been determined and correlated with the relevant manufacturing steps.     

粉末化学镀法制备的NiB／TiO2非晶态合金催化剂对环丁烯砜加氢反应的催化性能

 采用诱导沉积法及粉末化学镀法分别制备了纯态NiB及负载型NiB／TiO2非晶态合金催化剂．用XRD，ICP，SEM，TEM和DSC等手段对催化剂的物性及TiO2载体与NiB非晶态合金之间的相互作用进行了表征，考察了非晶态合金的结构、组成、形貌和热稳定性，并将其用于环丁烯砜加氢反应中．结果表明，相对于NiB而言，NiB／TiO2催化剂具有优良的热稳定性和催化活性，这缘于NiB和TiO2载体之间的相互作用及载体的分散作用．     

Thermal properties of rare earth elements complexes with 1,3,5-benzenetricarboxylic acid

Summary Rare earth elements 1,3,5-benzenetricarboxylates were prepared as solids of the general formula Ln(C₉H₃O₆)·nH₂O, where n=6 for La-Dy and n=4 for Ho-Lu,Y. Their solubilities in water at 293 K are of the order 10^-4-10^-6 mol dm^-3. The IR spectra of the complexes indicate that the carboxylate groups are bridging and bidentate chelates. Hydrated 1,3,5-benzenetricarboxylates lose water molecules during heating in one step (La-Tb), two steps (Y, Ho-Tm) or three steps (Dy, Yb, Lu). The anhydrous complexes are stable up to 573-742 K and decompose to oxides (Ce-Lu) at higher temperatures.