Probing the nature of the contact between fine particles by using ultrasound propagation

The propagation velocity (vs) of an ultrasonic signal through a granular material depends on the type of interparticle contact. For noncohesive glass beads, a power law behavior for consolidation stresses applied (σc) above 1 MPa has been measured in previous work. This equation is compatible with Hertz's interaction law between elastic solids. In the present work, we have tested the propagation velocity of ultrasound signals through a sample of fine powder. The tensile strength and compactivity of the powder were previously measured by means of the Seville powder tester (SPT), indicating plastic deformation of the surface asperities in contact for small to moderate consolidation stresses. However, the measurements of ultrasound propagation at high consolidations presented here are compatible with Hertz's law. This finding suggests that for high consolidation stresses, surface asperities are flattened, and it is therefore the elastic deformation of the bulk of the particles that determines the transmission of ultrasonic pulses.     

Structure refinement of sub-cubic-mm volume sample at high pressures by pulsed neutron powder diffraction: application to brucite in an opposed anvil cell

Neutron powder diffraction measurements of 0.9 mm³ of mixture of deuterated brucite and pressure medium were conducted at pressures to 2.8 GPa, using an opposed anvil cell and a medium-resolution diffractometer at Japan Proton Accelerator Research Complex pulsed neutron source. Spurious-free diffraction patterns were successfully obtained and refined to provide all structural parameters including Debye–Waller factors. Tilting of hydroxyl dipoles of brucite toward one of the three nearest-neighbor oxygen anions was confirmed to be substantial at pressure as low as 1.5 GPa. By this application, technical feasibility to analyze such a small sample has been newly established, which would be useful to extend the applications of neutron diffraction at high pressures.     

绿色ACEL粉末材料的晶体粒度对发光性能的影响

目前粉末ＡＣＥＬ器件有三类：玻璃屏、塑料软屏和搪瓷屏．目前商品化的电致发光材料，每炉料大约在１００～２００克之间，粒度在１０μｍ左右，不能满足产业化的需求．影响发光材料亮度、寿命、粒度的主要因素有Ｃｕ的浓度、灼烧时间、退火方式和灼烧气氛［１，２，３］...     

Zinc Mediated Reactions in Organic Synthesis: Efficient Synthesis of Silyl Ethers under Mild Conditions

General and practical method for the synthesis of silyl ethers in the presence of zinc powder under mild conditions has been described.     

NiMn2O4纳米粉体的相变过程和晶粒生长行为研究

采用溶胶凝胶法（Ｓｏｌ－Ｇｅｌ）制备ＮｉＭｎ２Ｏ４纳米粉体．用Ｘ射线衍射（ＸＲＤ）法，热分析仪研究ＮｉＭｎ２Ｏ４纳米粉体的相变过程．用Ｘ射线衍射线线宽法，透射电子显微镜（ＴＥＭ）研究晶粒长大行为．研究结果表明：热处理温度小于６７０°Ｃ，存在非晶晶化过程和向ＮｉＭｎ２Ｏ４尖晶石主晶相转变等相变过程，晶粒尺寸缓慢增大，热处理温度在于６７０°Ｃ，粉体的相结构为ＮｉＭｎ２Ｏ４尖晶石相．晶粒尺寸较快增长．相变过程严重影响了晶粒长大行为．     

Graphite powder and multiwalled carbon nanotubes chemically modified with 4-nitrobenzylamine.

We demonstrate that graphite powder and multiwalled carbon nanotubes (MWCNTs) can be derivatised by 4-nitrobenzylamine (4-NBA) simply by stirring the graphite powder or MWCNTs in a solution of acetonitrile containing 10 mM 4-NBA. We propose that 4-NBA partially intercalates at localised edge-plane or edge-plane-like defect sites and this hypothesis with a range of experimental data provided by electrochemistry in both aqueous and nonaqueous media, electron microscopy and X-ray powder diffraction.     

Degree of coherence and dimensions of the generation region of powder lasers

A degree of coherence of powder-laser radiation of 10–20% is estimated by the magnitude of the image contrast for a speckle, although cases are recorded where it attains 40–50%. It is found that as the average speckle intensity increases, the contrast decreases. It is established that the minimum, dimensions of the generation region in powders are 20–30 μm. Cases of existence of several generation centers simultaneously are noted. An attempt to interpret the results obtained is made. Institute of Radio Engineering and Electronics, Russian Academy of Sciences, 11, Mokhovaya St., Moscow, 103907. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 65, No. 5, pp. 780–786, September–October, 1998.     

Synthesis,Crystal Structure Determination from X‐Ray Powder Diffractometry and Vibrational Spectroscopic Properties of Mg[N(CN)2]2 · 4 H2O

Magnesium dicyanamide tetrahydrate Mg[N(CN)₂]₂ · 4 H₂O was synthesized by aqueous ion exchange starting from Na[N(CN)₂] and Mg(NO₃)₂ · 6 H₂O. The crystal structure was solved and refined on the basis of powder X‐ray diffraction data (P2₁/c, Z = 2, a = 737.50(2), b = 732.17(1), c = 971.67(2) pm, β = 98.074(1)°, wR_p = 0.059, R_p = 0.046, R_F = 0.075). In the crystal there are neutral complexes [Mg[N(CN)₂]₂(H₂O)₄] which are only connected via hydrogen bonds. Above 40 °C the tetrahydrate decomposes into anhydrous Mg[N(CN)₂]₂.     

Pre-equilibrium effects in (n, 2n) reactions at 14.2 MeV+

With a view to study the pre-equilibrium effects in neutron-induced reactions, the activation cross-sections for (n, 2n) reactions at 14.2±0.2 MeV in the heavy mass region have been measured using the versatile mixed powder technique and high resolution Ge(Li) detection. The experimental cross-sections are found to be consistently smaller than the predictions based on the statistical theory and this is attributed to the effect of pre-equilibrium decay in these reactions. The cross-sections due to pre-equilibrium decay were estimated using exciton, hybrid and unified models. When this cross-section was included in comparing the experimental cross-sections with theory, we obtained better agreement, within the limitations of the present-day preequilibrium theories. Preliminary results of this work were reported at the Nuclear Physics and Solid State Physics Symposium, Pune (1978).     

Determination of peptide φ angles in solids by relayed anisotropy correlation NMR

A solid state NMR method is presented for determination of a backbone dihedral angle φ in peptides, being based on the previously reported method, relayed anisotropy correlation (RACO) NMR [Y. Ishii et al., Chem. Phys. Lett. 256 (1996) 133]. In the present method, the and the dipolar tensors in the system are two-dimensionally (2D) correlated via polarization transfer from to under magic angle spinning (MAS). This method was applied to N-acetyl , -valine, and the H–C–N–H dihedral angle was determined to be 154.0±1.4° or 206.0±1.4°, the former agreeing with the X-ray value of 154±5°.