An approach to channel type molecular structures. 1. Synthesis ofBouquet-shaped molecules based on an [18]-O6 polyether macrocycle

An approach to a transmembrane cation channel is described. It is based on the grafting of oxygen bearing side-chains on a macrocyclic polyether unit that constitutes the organizing core. The resulting species has a structure of overall bouquet shape. The synthesis of such a molecule . _M ⁰ ,14a is described, together with that of its analogue bearing polymethylene side-chains _M ^C ,14b. The physicochemical properties of these molecules indicate that they possess the features expected on the basis of their structure.This paper is dedicated to the memory of the late Dr C. J. Pedersen.     

Amino acid analysis by using comprehensive two-dimensional gas chromatography

The separation characteristics of alkylchloroformate-derivatised amino acids (AAs) by using comprehensive two-dimensional gas chromatography (GC×GC) is reported. The use of a low-polarity/polar column set did not provide as good a separation performance as that achieved with a polar/non-polar column set, where the latter appeared to provide less correlation over the separation space. The degree of component correlation in each column set was estimated by using the correlation coefficient (r²; for ¹t_R and ²t_R data) with the low-polarity/polar and polar/low-polarity sets returning correlation coefficients of 0.86, and 0.00 respectively, under the respective conditions employed for the experiments. The 1.5-m non-polar ²D column (0.1-mm ID; 0.1-m film thickness) gave peak halfwidths of the order of 50–80 ms. Linearity of detection was good, over a three order of magnitude concentration range, with typical lower detection limit of ca. 0.01 mg L^–1, compared with 0.5 mg L^–1 for normal GC operation with splitless injection. The method was demonstrated for analysis of AAs in a range of food and beverage products, including wine, beer and honey. The major AA in these samples was proline. The Heineken beer sample had a relatively more complex and more abundant AA content compared with the other beer sample. The wine and honey samples also gave a range of AA compounds. Repetition of the sample preparation/analysis procedure for the honey sample gave acceptable reproducibility for individual AAs.     

Two-dimensional infrared (2D IR) spectroscopy. A new tool for interpreting infrared spectra

Two-dimensional infrared (2D IR) spectroscopy is used to study atactic polystyrene. 2D IR is a technique based on time-resolved detection of IR signals in response to an external perturbation, such as mechanical strain. Since different chemical functional groups respond to the applied perturbation at unique and often different rates, characteristic time-dependent variations of the IR-band intensities are observed. Correlation analysis of the dynamic variation of the IR signals yields a new spectrum defined by two independent wave numbers. Peaks located on a 2D IR spectral plane imply interactions and connectivities among chemical functional groups. By spreading convoluted IR bands over two dimensions, the spectral resolution is also greatly enhanced.     

Separation of fatty acid methyl esters by comprehensive two-dimensional supercritical fluid chromatography with packed columns and programming of sampling duration

Fatty acid methyl esters from various fats and oils were separated by comprehensive two-dimensional supercritical fluid chromatography with conventional packed columns and FID detection. The first dimension was a silica gel column and the second dimension was an ODS column. This combination was largely orthogonal for the separation of fatty acid methyl esters. The first dimension separations were primarily based on the number of double bonds while the second dimension separations were based on the chain length. The highly-ordered chromatograms and improved resolution allowed the easy detection and identification of minor components. Although the first dimension separations were performed under isobaric conditions where the peak width increased in proportion to the retention, the programming of the sampling duration allowed us to maintain the optimum re-injection frequency (3–4 times) per peak into the second dimension and so to minimize the total analysis time without deteriorating the resolution.     

矩形截面毛细管电泳和二维分离

在石英单晶表面制成矩矩截面毛细管柱中进行电泳实验。由于矩形柱比圆形柱有更大散热侧面积且石英单晶的导热性能远无于熔融石英，所以可施加较高的场强，不仅提高了柱效，而且缩矩了分离时间。两相交的通道之间形成自然连接，可实现二维分离，并消除死体积。     

Further studies on stability analysis of nonlinear Roesser-type two-dimensional systems

This paper is concerned with further relaxations of the stability analysis of nonlinear Roesser-type two-dimensional （2D） systems in the Takagi-Sugeno fuzzy form. To achieve the goal, a novel slack matrix variable technique, which is homogenous polynomially parameter-dependent on the normalized fuzzy weighting functions with arbitrary degree, is developed and the algebraic properties of the normalized fuzzy weighting functions are collected into a set of augmented matrices. Consequently, more information about the normalized fuzzy weighting functions is involved and the relaxation quality of the stability analysis is significantly improved. Moreover, the obtained result is formulated in the form of linear matrix inequalities, which can be easily solved via standard numerical software. Finally, a numerical example is provided to demonstrate the effectiveness of the proposed result.     

Analysis of PCBs in Biotic Matrices by Two-Dimensional GC-ECD

Abstract

The suitability of three GC-ECD systems for the separation of a model mixture containing various congeners of PCBs together with persistent chlorinated aromatics (pesticides and their metabolites, industrial chemicals) was tested. Analyses were performed on two parallel capillaries, the stationary phase of one of them was always in routine practice very common 5% phenyl-methylpolysiloxane, the second one was either 50% phenylmethylpolysiloxane or 7% phenyl-7% cyanopropyl-methylpolysiloxane. The number of unresolved (coeluted) analytes was significantly reduced in these systems and thus unbiased quantitation of PCBs and other components used for regulation was possible. The utilization of this type of multidimensional chromatography for rapid and reliable analysis of real samples (fish oil, human fat) was documented.     

Discrete filter operators for large‐eddy simulation using high‐order spectral difference methods

The combination of a high‐order unstructured spectral difference (SD) spatial discretization scheme with sub‐grid scale (SGS) modeling for large‐eddy simulation is investigated with particular focus on the consistent implementation of a structural mixed model based on the scale similarity hypothesis. The difficult task of deriving a consistent formulation for the discrete filter within the SD element of arbitrary order led to the development of a new class of three‐dimensional constrained discrete filters. The discrete filters satisfy a set of selected criteria and are completely local within the SD element. Their weights can be automatically computed at run time from the number of solution points within each element and the expected filter cutoff length scale. The novel discrete filters can be applied to any SGS model involving explicit filtering and to a broad class of high‐order discontinuous finite element numerical schemes. The code is applied to the computation of turbulent channel flows at three Reynolds numbers, namely Re_τ = 180, 395, and 590 (based on the friction velocity u_τ and channel half‐width δ). Results from computations with and without the SGS model are compared against results from direct numerical simulation. The numerical experiments suggest that the results are sensitive to the use of the SGS model, even when a high‐order numerical scheme is used, especially when the grid resolution is kept relatively low and mostly in terms of resolved Reynolds stresses. Results obtained using existing filters based on the projection of the solution over lower‐order polynomial bases are also shown and demonstrate that these filters are inadequate for SGS modeling purposes, mostly because of their inability to enforce the selected cutoff length scale with sufficient accuracy. The use of the similarity mixed formulation proved to be particularly accurate in reproducing SGS interactions, confirming that its well‐known potential can be realized in conjunction with state‐of‐the‐art high‐order numerical schemes.Copyright © 2012 John Wiley & Sons, Ltd.     

Quartz Crystal Microbalance Biosensor for Saxitoxin Based on Immobilized Sodium Channel Receptors

This work explored the possibility of coupling the toxin receptor-binding principle with the piezoelectric transduction principle. The sensing component of the saxitoxin biosensor involves a piezoelectric quartz crystal that was coated with sodium channel receptors. The sodium channel receptors were isolated from the electroplax organ of Electrophorus electricus. Binding of the sodium channel extracts to the quartz crystal was facilitated by pre-coating the gold electrode with a hydrophobic self-assembled monolayer of dodecanethiol. The instrumentation system consisted of a flow cell that held the quartz crystal, an oscillator circuit, an injection port, and a frequency counter that was connected to a personal computer. The various immobilization and measurement parameters were optimized. Binding of saxitoxin standards with the immobilized sodium channels was monitored through the decrease in the crystal oscillation frequency readings (ΔF) upon the introduction of saxitoxin into the flow cell. A calibration curve for saxitoxin was constructed by plotting the ΔF values vs. saxitoxin concentrations in the range from 0.1 to 2.0 μg/mL. A correlation coefficient of 0.9653 was obtained. The saxitoxin biosensor developed has the potential to be applied to the rapid screening of total paralytic shellfish poisoning toxins.