Open tubular columns with mixed‐mode reversed‐phase and weak anion‐exchange stationary phase for capillary electrochromatography

Columns for open tubular capillary electrochromatography, coated with a mixed‐mode (RP/ion‐exchange) stationary phase, were prepared by using the sol–gel method. The synthetic procedure was optimized by changing the ratios of tetraethoxysilane, octyltriethoxysilane, and 3‐aminopropyltriethoxysilane in the initial sol. SEM studies reveal that a coating with about 400 nm thickness can be obtained. The inner surface properties of these capillaries were probed by measuring the EOF as a function of pH. The surface of this stationary phase contains octyl, amine, and residual silanol moieties; the amine and silanol groups determine the net charge on the inner surface of the capillary and can produce a switchable EOF (anodal/cathodal). The performances of the columns were evaluated by open tubular capillary electrochromatography using a wide range of compounds (polycyclic aromatic hydrocarbons, aromatic acids, and aromatic amines).     

Voltammetry Under Microfluidic Control,a Flow Cell Aproach

A generic approach to the design, construction and experimental characterization of novel microelectrochemical reactors (MECR) is presented. Structurally well‐defined rectangular microchannels incorporating electrochemical sensors were fabricated using a propriety photosensitive glass and photolithographic techniques. Microelectrode sensors were produced via evaporation to yield, gold, silver or platinum bands of approximate lengths 10–50 μm. The approach outlined permits cells of dimensions in the range: height 50–100 μm, width 100–500 μm and length 1–3 cm to be accurately constructed, in single or array configurations and were characterized via a voltammetric study utilizing electrolyte solutions containing N,N,N′N′‐Tetramethyl‐1,4‐phenylenediamine. In all cases, the test cells were constructed so that the three dimensional hydrodynamic boundary layer within the cells would significantly influence the reagent transport and therefore the observed current density at the microelectrodes. The current/flow rate relationship observed was analogous to the response of the observed within the macroscopic channel flow cells, where typically the cell design is restricted to configurations where a two dimensional transport analysis can be performed.     

Separation of mixtures of solvents with wide bore capillary columns connected in series

The gas chromatographic separation of the components of a complex mixture of industrial solvents, not possible on a single stationary phase owing to coelution of some of the compounds, has been achieved on two serially connected wide bore capillary columns of different polarity. The analysis of a mixture of twenty five compounds was optimized using the serial gas chromatography theory of Purnell and Williams. The capacity factors of sample components measured with the two columns coupled in series were found to agree with those predicted by theory, regardless of the order in which they were connected.     

Preparation of open tubular capillary column covalently coated with polystyrene sulfonate with 4,4′-Azobis(4-cyanopentanoyl chloride) as polymerization initiator for electrochromatographic separation of alkaloids,sulfonamides, and peptides

An open tubular capillary electrochromatography column covalently bonded with polystyrene sulfonate was prepared via in situ polymerization using functionalized Azo-initiator 4,4′-Azobis(4-cyanopentanoyl chloride). Scanning electron, fluorescence, and atomic force microscopy techniques showed the formation of a relatively rough layer of polymer. In addition, –CN and C = O stretching vibrations from infrared spectroscopy proved the successful immobilization of the azo-initiator through covalent bonding and X-ray photoelectron spectroscopy confirmed the elemental composition of the formed polymer layer. The prepared column was found to be appropriate for small and medium-sized molecules separation. Compared to bare fused silica capillary column higher selectivity and resolution were obtained for the separation of alkaloids, sulfonamides, and peptides as a result of the electrostatic and pi-pi stacking interactions between the small organic molecules and the coated column without compromising the electroosmotic flow mobility. Separation efficiency was also increased compared to the bare capillary for the separation of alkaloids (about 1.5 times). Moreover, intraday, inter-day, intra-batch, and inter-batch relative standard deviation values of retention time and peak area of peptides were within 2% and 10%, respectively, indicating good repeatability of the column preparation procedure. The developed method for the covalent bonding of polymers through a functionalized azo-initiator could represent a promising stable method for the preparation of an open tubular column.     

Modeling of a counterflow plasma reactor

Modeling of a counterflow plasma reactor is presented, using liquid injection for the synthesis of fine particles. An experimental reactor has been developed in this laboratory, and feasibility has been demonstrated for synthesizing advanced ceramic powders. The flow field calculations show two major recirculating regions which are of importance for increasing the particles' residence time inside of the reactor. In addition, the temperature within these recirculation zones remains relatively uniform. For simulation, water droplet trajectories have been calculated for droplets produced by an injection probe. It is shown that the droplets in a size range below 50 m in diameter will follow the streamlines and evaporate completely within a short traveling distance. This finding suggests that this reactor configuration provides a favorable environment for the synthesis of fine particles using liquid precursors.     

Diamond synthesis by DC thermal plasma CVD at 1 atm

Diamond crystals and films have been success full y synthesized by DC thermal plasma jet CVD at a pressure of I atrn. A novel triple torch plasma reactor has been used to generate a convergent plasma volume to entrain the participating gases. Three coalescing plasma jets produces! by this reactor direct the dissociated and ionized gaseous species onto ( 100) silicon wafer substrates where the diamond grows. In a typical 10-min run, depending on the method of .substrate preparation, either microcrystals with sizes up to 8 m or continuous films with thicknesses of 1–2 m have been obtained. X-ray diffraction, scanning electron microscopy, and Raman spectroscopy have been used for the characterization of the crystals and of the films.     

Fast separations with open tubular ion exchange capillary columns

Fused silica columns of 4.6 μm i.d. were coated with 3-sulfopropylsilane as a cation exchanger and 3-(2-aminoethyl-amino)-propylsilane as an anion exchanger. Fast separations of cations (< 25 seconds) and of anions (< 35 seconds) were obtained, using a potentiometric microelectrode as a detector. In proceeding towards smaller i.d.s, a mixture of alkali metal cations could be separated successfully in an uncoated fused silica capillary of 2.3 μm i.d. as a result of retention by the surface silanol groups at pH 9.4.     

Liquid fluidized bed starter culture ofTrichoderma reesei for cellulase production

A starter culture ofTrichoderma reesei (Rut-C30) prepared in a liquid fluidized bed reactor (LFBR) gave better growth and greater cellulase production in submerged fermentation than a conventional shake flask inoculum. The LFBR starter was prepared by first coatingT. reesei spores to 0.25 mm size corncob (1.0x10⁸g^-1) in a medium containing 1.0% corncob, 0.5 gL^-1 xylose and 0.1 gL^-1 lactose in a balanced salt solution, then fluidizing the particles in the LFBR for 36 h to allow germination of the spores, and covering the particles with an approx 30 μm thick biofilm. This biofilm that developed in constant adherence to the lignocellulosic carrier, apparently became well adapted to grow rapidly on insoluble cellulose substrates (Solca Floc), and had the enzymes of the cellulase complex induced for increased cellulase production. The LFBR starter used in a stirred tank reactor (STR) gave 15 gL^-1 biomass production and 6.5 IU mL^-1 overall cellulase activity with a volumetric productivity of 64 IU L^-1h^-1 in a 5 d fermentation, compared with a 7 d shake flask inoculum that gave 11 gL^-1 biomass and 3.2 IU mL^-1 cellulase activity, with a volumetric productivity of 31IU L^-1h^-1. The LFBR starter culture retained its viability in dry storage for 6–9 mo.     

分子筛膜反应器的研究进展

分子筛膜具有规整的微孔结构(<1 nm), 耐高温高压、 抗有机溶剂, 在液相和气相小分子分离中受到广泛关注. 分子筛膜可以与催化反应耦合于一体构成膜反应器, 使反应过程与组分分离同时进行, 促进反应平衡移动, 达到反应强化的效果. 本文概述了近十年不同类型分子筛膜反应器在催化反应中的应用研究进展, 并对分子筛膜反应器未来的发展趋势进行了展望.