电子束、离子辅助和离子束溅射三种工艺对光学薄膜性能的影响

运用电子束、离子辅助和离子束溅射三种镀膜工艺分别制备光学薄膜,包括单层氧化物薄膜和增透膜,然后采取一系列测试手段,如Zygo轮廓仪、原子力显微镜、表面热透镜技术和X射线衍射等技术,来分析和研究不同的工艺对这些薄膜性能的不同影响,以判断合理的沉积工艺。     

Effect of graft polymer prepared by living radical polymerisation on electro-optical properties of polymer dispersed liquid crystal

In this study, a graft polymer matrix prepared by living radical polymerisation had been incorporated into polymer dispersed liquid crystals (PDLCs). The electro-optical properties of the PDLCs were investigated. The results showed that the length and density of graft chain had a great influence on the memory effect of the PDLCs. Low-driving-voltage and weak-memory-effect PDLCs could easily be obtained with a graft polymer matrix.     

Annealing effect in glass woven fabric composites,Part II. Bending properties

Effects of annealing on bending properties of composites reinforced with plain glass woven fabrics that were treated with different concentrations of silane coupling agent were investigated in this paper. Bending strength increased by annealing in the specimen treated with lower silane concentration. Higher annealing temperature in a range from 80°C to 150°C led to higher bending strength. Then, the fracture mode changed from a micro-crack type (low strength type) to a branched matrix crack type (high strength type) by annealing.     

Effects of laser irradiation on optical properties of a-Se100−x Te x thin films

The effect of laser irradiation on the optical properties of thermally evaporated Se_100?x Te _x (x=8, 12, 16) chalcogenide thin films has been studied. The result shows that the irradiation causes a shift in the optical gap. The results have been analyzed on the basis of laser irradiation-induced defects in the film. The width of the tail of localized state in the band gap has been evaluated using the Urbach edge method. As the irradiation time increases, the values of the optical energy gap for all compositions decrease, while tail energy width increases. It is also observed that the optical energy gap decreases with increasing Te content in the alloy. These changes are a consequence of an increment in disorder produced by laser irradiation in the amorphous structure of thin film.     

Mechanics and morphology of single-walled carbon nanotubes: from graphene to the elastica

Abstract

The elastica is referred to the shape of the curve into which the centreline of a flexible lamina is bent. Hence, single-walled carbon nanotubes (SWCNTs) are treated as the elastica obtained from bending of graphene. The corresponding large deformation accompanies both the material and geometrical non-linearities. The morphology of the free-standing SWCNTs such as the natural angle of twist, bond lengths, tube radius and wall thickness are determined. Moreover, it is shown that the induced self-equilibriated strain field has a remarkable impact on the mechanical behaviour of the nanotube. Utilization of an appropriate non-linear continuum constitutive relation for graphene leads to exact formulation of the governing equations of SWCNTs. Subsequently, through perturbation analysis, the asymptotic solutions of the initial elastic fields for the SWCNTs are presented. By performing ab initio calculations, the components of the fourth and sixth-order elastic moduli tensors in the constitutive model of graphene needed in this study are computed.     

Synthesis,thermal, and photocrosslinking studies of thermotropic liquid crystalline poly(benzylidene‐ether)esters containing α,β‐unsaturated ketone moiety in the main chain

A series of poly(benzylidene‐ether)esters containing a photoreactive benzylidene chromophore in the main chain were synthesized from 2,6‐bis(4‐hydroxy‐3‐methoxybenzylidene)cyclohexanone (BHMBCH) with various aliphatic and aromatic diacid chlorides by an interfacial polycondensation technique. The intrinsic viscosity of the synthesized homo and copolymers determined by Ubbelohde viscometer was found to be 0.12 to 0.17 dL/g. The molecular structure of the monomer and polymers was confirmed by FT‐IR, ¹H NMR, and ¹³C NMR spectral analyses. These polymers were studied for their thermal stability and photochemical properties. Thermal properties were evaluated by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). It was found that the polymers were stable up to 280 °C and start degrading thereafter. Increase in acid methylene spacer length decreased the thermal stability. The self‐extinguishing property of the synthesized polymers was studied by calculating the limiting oxygen index (LOI) value using a Van Krevelen's equation. The influence of the length of methylene spacer on phase transition was investigated using DSC and odd‐even effect has been observed. Hot‐stage optical polarizing microscopic (HOPM) study showed that most of the polymers exhibited birefringence and opalescence properties. The photolysis of liquid crystalline poly(benzylidene‐ether)esters revealed that α,β‐unsaturated ketone moiety in the main chain dimerises through 2π + 2π cycloaddition reaction to form a cyclobutane derivative and leads to crosslinking. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Characterizing polymer macrostructures by identifying and locating microstructures along their chains with the kerr effect

In this brief report, we demonstrate that Kerr effect measurements, which determine the excess birefringence contributed by polymer solutes in dilute solutions observed under a strong electric field, are highly sensitive to and capable of determining their microstructures, as well as their locations along the macromolecular backbone. Specifically, using atactic triblock copolymers with the same overall composition of styrene (S) and p-bromostyrene (pBrS) units, but with two different block arrangements, that is, pBrS₉₀-b-S₁₂₀-b-pBrS₉₀ (I) and S₆₀-b-pBrS₁₈₀-b-S₆₀ (II), which are indistinguishable by NMR, we detected a dramatic difference in their molar Kerr constants (_mK), in agreement with those previously estimated. Although similar in magnitude, their Kerr constants differ in sign, with _mK(II) positive and _mK(I) negative. In addition, S/pBrS random and gradient copolymers synthesized by reversible addition-fragmentation chain-transfer (RAFT) polymerization exhibit a heretofore unexpected enhanced enchainment of racemic (r) pBrS-pBrS diads. Comparison of their observed and calculated _mKs suggests that the gradient S/pBrS copolymers possess an unanticipated additional gradient in stereosequence that parallels their comonomer gradient, that is, as the concentration of pBrs units decreases from one end of the copolymer chain to the other, so does the content of r diads. This conclusion could only be reached by comparison of observed and calculated Kerr effects, which access the global properties of macromolecules, and not NMR, which is only sensitive to local polymer structural environments, but not to their locations on the copolymer chains. Molar Kerr constants are characteristic of entire polymer chains and are highly sensitive to their constituent microstructures and their distribution along the chain. They may be used to both identify constituent microstructures and locate them along the polymer chain, thereby enabling, for the first time, characterization of their complete macrostructures. © 2013 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

新型热作模具钢CH95的高温力学和抗磨性能研究

对比研究了CH95钢与H11钢的高温力学及抗磨性能,分析了2种模具钢的组成和微结构对其高温力学性能和抗磨性能的影响,采用透射电子显微镜观察分析了CH95钢试样中碳化物的形貌．结果表明：CH95钢与H11钢相比具有优异的高温力学性能;其优异的高温力学性能和抗磨性能归因于其特定的微观结构;CH95钢中细小且呈弥散分布的MC、M2C强化相的含量较高,使得其在高温下仍可保持优良的力学性能和抗磨性能;稀土可加速CH95钢表面致密氧化物层的形成,提高其强度、韧性、耐磨性和抗剥离能力;而经离子氮化处理后形成的细小且呈弥散分布的合金氮化物亦可起弥散强化作用,从而使得CH95钢在高温高载荷下的抗磨性能明显优于H11钢．     

一个吡啶二甲酸镉配位聚合物的合成、晶体结构及荧光性质

通过水热方法,采用H3CAM(H3CAM=4-hydroxy-pyridine-2,6-dicarboxylic acid)与Cd(NO3)2.4H2O反应,合成了1个镉配位聚合物[Cd4(HCAM)4(H2O)8]n(1),并对其结构和荧光性质进行了研究。结构分析结果表明该配合物属于单斜晶系,C2/c空间群。四个HCAM2-配体桥联4个镉离子形成了1个四核镉单元。这些孤立的单元通过氢键作用形成了1个三维配位框架。研究表明,该配合物在室温下能发出兰色荧光。