双面金属包覆介质波导模序数的判别方法

在双面金属包覆介质波导中 ,随着介质层厚度的变化 ,会出现TM0 模与TM1 模的分离和简并两种状态 ,从而影响衰减全反射 (ATR)谱中模序数的确认。通过对金属波导的理论分析和实验研究 ,提出了三种模序数确认方法 :本征角计算法、吸收峰全峰半宽比较法和吸收峰峰间距比较法 ,实现了两种状态下对模序数的准确判断     

总延误问题顺时安排法的性能比

给定一组工件的加工时间与工期，要求确定这些工件在一台机器上的加．工排列，使相应的总延误达到最小，这就是总延误问题．该问题在近年已被证明是NP困难的．由Wilkermn和Irwin（1971），林勋（1983）等所研究的顺时安排法能得到相邻交换意义下的局部解．在本文中，我们进一步证明该算法能得到前移邻域意义下的局部解，并确定了该算法的性能比．     

Photoelastic stress freezing analysis of total shoulder replacement systems

Photoelastic stress freezing analyses in the orthopaedic literature have, in the past, been limited to studies where bone-on-bone, bone-on-metal or ultra-high molecular weight polyethylene (UHMWPE)-on-metal constructs are modeled. In these cases photoelastic plastics are used to simulate either bone or UHMWPE as it interacts with a metal implant. In joints such as the shoulder, a UHMWPE component is often cemented directly into the scapula's glenoid concavity using polymethylmethacrylate (PMMA). While a photoelastic material can be used to simulate bone with proper load scaling, UHMWPE and PMMA have very different mechanical properties at elevated stress freezing temperatures as compared within vivo body temperature. In this study, materials were identified such that proper scaling of elastic properties at elevated temperatures was utilized to simulate the metal-UHMWPE-PMMA-bone construct. Stresses on orthogonal planes throughout the glenoid were compared for two different UHMWPE component anchoring geometries (keeled and pegged). High stresses were found at the neck of the glenoid and also at the component-bone interface beneath simulated PMMA inclusions.     

全变差有界函数列的一致(R)可积性

给出了一致有界单调函数列一致可积性定理 ,由此得出全变差序列有界的收敛函数列的一致可积性 .说明了该结论可判断一些非一致收敛函数列的逐项积分性质 .     

Experimental Evaluation of Strain Shielding in Distal Femur in Revision TKA

Theoretical concerns about the use of cemented and press-fit stems in revision total knee arthroplasty (TKA) include stress shielding with adverse effects on prosthesis fixation. Radiological studies have showed distal femoral bone resorption after revision TKA. The revision with use of stems can place abnormal stresses. These stresses can promote the effect of bone stress shielding and may contribute to bone loss. Experimental quantification of strain shielding in the distal synthetic femur following TKA is the main purpose of the present study. Three different constructs of TKA were assessed. The first construct included a stemless femoral component. The other two included a press-fit and a cemented femoral stem. Cortical bone strains were measured experimentally with tri-axial strain gauges in synthetic femurs before and after in-vitro knee surgery. The difference between principal strains of implanted and intact femur was calculated for each strain gauge position. This study indicates that the use of stems in distal femur changes the distribution and magnitude of bone strains. The press-fit stem provoked relevant bone area (stem length) subjected to strain shielding and also originated the highest reduction of strains in the distal region, which can potentially induce bone resorption. The stemless implanted femur produced minor bone strain changes relatively to the intact femur. The use of distal femur stems increases initial stability in the bone, but the observed reduction of strains in this region, relative to the intact femur, provokes strain shielding that can induce bone resorption and may compromise the long term implant stability.     

Synthesis of spherical and hemispherical sugar‐containing poly(ornithine) dendrimers

A novel sugar‐containing poly(ornithine) dendrimer is synthesized for possible antigen delivery and related applications. The dendrimer contains an ornithine dendron as interior scaffolding and oligosaccharides on the periphery, which provide an attachment site for a peptide antigen. Maltose or lactose is bound to both hemispherical and spherical poly(ornithine) dendrimer generation 3 (G3) by reductive amination between its reducing end and the peripheral amino group of the dendrimer using a borane‐pyridine complex in a buffer solution at 50 °C. The degree of substitution of sugar is changed by varying the molar ratio of sugar to dendrimer. When the surface of spherical poly(ornithine) dendrimer G3 is modified by binding β‐alanine to the 16 amino groups, highly substituted maltose‐ or lactose‐β‐alanine‐poly(ornithine) dendrimer G3 is obtained in high yield after 7 days of reaction. The structures of these sugar‐containing dendrimers are characterized by NMR and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry analyses. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1400–1414, 2004     

Cyclo[(6-amino-6-deoxy-d-galactonic acid)4]: a new class of carbopeptoid-cyclodextrin

The formation of the 28-membered ring cyclo[(6-amino-6-deoxy-d-galactonic acid)₄] by cyclisation of a protected open chain fully hydroxylated nylon 6 linear tetramer in modest yield provides the first example of a new class of carbopeptoid-cyclodextrin.     

Strategic commitment to price to stimulate downstream innovation in a supply chain

It is generally in a firm’s interest for its supply chain partners to invest in innovations. To the extent that these innovations either reduce the partners’ variable costs or stimulate demand for the end product, they will tend to lead to higher levels of output for all of the firms in the chain. However, in response to the innovations of its partners, a firm may have an incentive to opportunistically increase its own prices. The possibility of such opportunistic behavior creates a hold-up problem that leads supply chain partners to underinvest in innovation. Clearly, this hold-up problem could be eliminated by a pre-commitment to price. However, by making an advance commitment to price, a firm sacrifices an important means of responding to demand uncertainty. In this paper we examine the trade-off that is faced when a firm’s channel partner has opportunities to invest in either cost reduction or quality improvement, i.e. demand enhancement. Should it commit to a price in order to encourage innovation, or should it remain flexible in order to respond to demand uncertainty. We discuss several simple wholesale pricing mechanisms with respect to this trade-off.     

有向全图的幂敛指数和周期

设G是有向图,T(G)表示G的有向全图.本文得到了它们的幂敛指数k(G)和k(T)之间的关系:对任何有向图G,周期p(T(G))=1;当G是本原图时,k(T)≤k(G)+1,文中给出了取得k(G)+1的两类图;当G是无圈图时,k(T)=2k(G)-1,当G是有向圈时,k(T)=2|V(G)|-1,当G是强连通时得到了k(T)的一些估计.     

理想流体一维绝热稳定流动能量方程推导

对理想流体一维绝热稳定流动作了讨论．对一般理想流体(可压缩或不可压缩)，用两种方法推出了能量方程．在此基础上，讨论了流动可逆性及不同流体性质对流动参数的影响．