The physical properties of pressure sensitive rubber composites

Nitrile butadiene rubber, NBR, structural foam of different apparent densities was obtained by using different concentrations of foaming agent, azodicarbonamide, ADC/K. The true stress-strain characteristics, in case of compression, of foamed samples after the application of cyclic stress-strain were measured. The effect of the cyclic stress-strain on strain energy density of ADC/K foaming agent-filled NBR rubber composites was studied. The mechanical parameters were found to depend on the foaming agent concentration and on the pre-cyclic fatigue number. Results also indicated that the strain energy decreased with filler concentration.The effects of the cyclic stress-strain on the conductivity of ADC/K foaming agent-filled NBR rubber composites were studied. The electrical properties were found to depend on the foaming agent concentration, the strain amplitude and the number of stress-strain cycles of pre-strain. This study was assisted by the current-voltage characteristics which were measured under the effect of different compression ratios: 0%, 5%, 10%, 15%, 20%, 25% and 30%. The free current carrier mobility and the equilibrium concentration of charge carriers in the conduction band were produced as functions of compressive strain. Results also indicate that there is a linear variation between pressure and conductivity for all samples, which means that these samples can be used as a pressure sensor.     

Application of high resolution ICP-spectrometry to the determination of B,Be, Co,Mo and Sn in soils and similar matrices

The most sensitive emission lines for the elements B, Be, Co and Mo are strongly influenced by disturbing emission lines of Fe using normal optical resolution. The advantages of high resolution, applying the new ICP-spectrometer JY 38 Plus (Jobin-Yvon, France) with the 2400 lines/mm grating measuring in the 1st and 2nd order will be discussed. Beside the concentrations in soils, sediments and sludges, applying aqua regia and HF decomposition methods, the detection limits in these matrices will be given. The possibilities of ICP-spectrometry for the determination of the above-mentioned elements are shown at the examples of SRMs (standard reference materials). The materials used here were three soils and three sludges from the BCR (Community Bureau of Reference, European Communities) and one sediment from NBS (National Bureau of Standards, USA). For example, the most sensitive and normally used line for the determination of boron at 249.7733 nm cannot be used in case of this type of matrix due to normally high Fe-concentrations and due to a strong Fe-interference. Therefore, it is necessary to use the line at 249.6778 nm, where an interference-free measurement can be achieved in case of high optical resolution. The measured B-contents in these samples are in the range of 20 to 60 g/g, for Co in the 10 g/g region, for Be well below 1 g/g, for Sn between 3 and 400 g/g. Mo was only detectable in the sludge samples (limit of determination 0.5 g/g).Presented in part at the 1989 European Winter Conference on Plasma Spectrochemistry, Reutte, Austria     

Bench Scale Studies of the Soil Aeration Process for Bioremediation of Petroleum Hydrocarbons

An alternative to traditional hydrocarbon bioremediation is to pump air through unsaturated soils to create aerobic conditions and induce biodegradation. This study examines the effects of moisture and nutrient augmentation on biodegradation of petroleum hydrocarbons in aerated soils. Findings indicate that forced aeration, coupled with additions of nutrients and moisture, stimulate hydrocarbon-degrading microorganisms and present a feasible approach to bioremediation management.     

A class of multiple shrinkage estimators

Based on a sample of size n, we investigate a class of estimators of the mean of a p-variate normal distribution with independent components having unknown covariance. This class includes the James-Stein estimator and Lindley's estimator as special cases and was proposed by Stein. The mean squares error improves on that of the sample mean for p3. Simple approximations imations for this improvement are given for large n or p. Lindley's estimator improves on that of James and Stein if either n is large, and the coefficient of variation of is less than a certain increasing function of p, or if p is large. An adaptive estimator is given which for large samples always performs at least as well as these two estimators.     

Detection of NAD+-dependent alcohol dehydrogenase activities in YR-1 strain of Mucor circinelloides, a potential bioremediator of petroleum contaminated soils

Different soluble NAD⁺-dependent alcohol dehydrogenase (ADH) isozymes were detected in cell-free homogenates from aerobically grown mycelia of YR-1 strain of Mucor circinelloides isolated from petroleumcontaminated soil samples. Depending on the carbon source present in the growth media, multiple NAD⁺-dependent ADHs were detected when hexadecane or decane was used as the sole carbon source in the culture media. ADH activities from aerobically or anaerobically grown mycelium or yeast cells, respectively, were detected when growth medium with glucose added was the sole carbon source; the enzyme activity exhibited optimum pH for the oxidation of different alcohols (methanol, ethanol, and hexadecanol) similar to that of the corresponding aldehyde (≈7.0). Zymogram analysis conducted with partially purified fractions of extracts from aerobic mycelium or anaerobic yeast cells of the YR-1 strain grown in glucose as the sole carbon source indicated the presence of a single NAD⁺-dependent ADH enzyme in each case, and the activity level was higher in the yeast cells. ADH enzyme from mycelium grown in different carbon sources showed high activity using ethanol as substrate, although higher activity was displayed when the cells were grown in hexadecane as the sole carbon source. Zymogram analysis with these extracts showed that this particular strain of M. circinelloides has four different isozymes with ADH activity and, interestingly, one of them, ADH4, was identified also as phenanthrene-diol-dehydrogenase, an enzyme that possibly participates in the aromatic hydrocarbon biodegradation pathway.     

Determination of the Thermal Degradation Kinetic Parameters of Carbon Fibre Reinforced Epoxy Using TG

In this work, a kinetic study on the thermal degradation of carbon fibre reinforced epoxy is presented. The degradation is investigated by means of dynamic thermogravimetric analysis (TG) in air and inert atmosphere at heating rates from 0.5 to 20°C min⁻¹ . Curves obtained by TG in air are quite different from those obtained in nitrogen. A three-step loss is observed during dynamic TG in air while mass loss proceeded as a two step process in nitrogen at fast heating rate. To elucidate this difference, a kinetic analysis is carried on. A kinetic model described by the Kissinger method or by the Ozawa method gives the kinetic parameters of the composite decomposition. Apparent activation energy calculated by Kissinger method in oxidative atmosphere for each step is between 40–50 kJ mol⁻¹ upper than E _a calculated in inert atmosphere. The thermo-oxidative degradation illustrated by Ozawa method shows a stable apparent activation energy (E _a ≈130 kJ mol⁻¹ ) even though the thermal degradation in nitrogen flow presents a maximum E _a for 15% mass loss (E _a ≈60 kJ mol⁻¹ ). This revised version was published online in July 2006 with corrections to the Cover Date.     

A Sensitive Spectrophotometric Determination of Nitrite in Water and Soil

A highly sensitive spectrophotometric method for the determination of nitrite in water and soil has been developed. The reaction of nitrite with acidified potassium iodide to liberate iodine which oxidizes leuco‐crystal violet (LCV) to form crystal violet having absorption maxima at 590 nm forms the bases of this method. In aqueous medium the system obeys Beer's law in the range of 0.1 to 1.0 μg per 25 mL (0.004–0.04 ppm), while in an extractive system the range is 0.025–0.25 μg in 100 mL (0.00025–0.0025 ppm). The molar absorptivity and Sandell's sensitivity were found to be 1.54 × 10⁶ 1 mol^?1 cm^?1 and 44 pg cm^?2, respectively.     

还原气化-原子荧光光谱法快速测定绿色食品基地土壤中的砷与汞

应用还原气化-原子荧光光谱法，使待测元素与基体自动分离、富集，测定绿色食品基地土壤中的AS、HG。经对国家经土壤标准物质进行分析证明，该方法具有快速、准确、灵敏度高等优点，用于绿色食品基地的审评检测，结果令人满意。     

Quenching of Flame Propagation with Heat Loss

The steady propagation of a planar laminar premixed flame, with a one-step exothermic reaction and linear heat loss, is studied. The corresponding travelling wave equations are solved numerically. The dependence of the flame velocity on the heat loss parameter is determined and compared with known results obtained by asymptotic expansion and other approximations. Due to the introduction of an ignition temperature the problem can be reduced to a bounded interval (of length L) and the graph of flame speed versus heat loss parameter can be parametrised by L. The numerical method is tested in the case of a step function nonlinearity when the exact solution of the differential equations can also be calculated.     

Element determination in medieval soil samples by total reflection X-ray fluorescence analysis

An aqua regia extraction procedure for heavy metals in soils optimised for total reflection X-ray fluorescence analysis is presented. The procedure is applied to 92 soil samples of medieval layers from the city area of Dortmund. Sixteen elements (P, S, K, Ca, Ti, Cr, Mn, Fe, Ni, Cu, Zn, Rb, Sr, Ag, Sn, and Pb) were used to characterise 17 sample sites. The results are projected onto the medieval urban structure of Dortmund. Two sites loaded with non-ferrous heavy metal could be detected and correlated with archaeological data. The efficiency and repeatability of the proposed extraction procedure is discussed.