Removal of humic matter interference in the determination of Cr(VI) in soil extracts by the diphenylcarbazide method

Alkaline digestion of soil samples, which is recommended for minimizing Cr(III)–Cr(VI) interconversions during the extraction of Cr(VI), may also solubilize humic matter (HM). The latter is responsible for both positive and negative interference in the analysis of Cr(VI) in the extract by the diphenylcarbazide (DPC) method. Humic compounds indeed absorb light at 540 nm as the Cr-DPC product and are also able to rapidly reduce Cr(VI) under the pH conditions of the standard DPC method. To prevent any risk of interference and make the DPC method applicable to soil extracts, a new protocol is proposed. This consists of three successive steps: (1) extraction of Cr(VI) by the U.S.EPA method 3060A in the presence of Mg²⁺; (2) batch removal of solubilised HM by the XAD-7 sorbent at pH 3.0 ± 0.1 with 3–5 min contact time; (3) analysis of Cr(VI) with the DPC method at pH 3.0 ± 0.1. The application of this new protocol to the soil product SQC-012 Lot 4 certified by R.T. Corporation (RTC, USA) gave significantly lower Cr(VI) concentrations and smaller variability compared to certified values (46.5 ± 2.3 instead of 153 ± 32.6 mg/kg). The new protocol was validated by Cr(VI) and Cr(III) spikes either to the soil/extractant suspension or to the exctract. Cr(VI) results in the wide range of acceptance limits (104–202 mg/kg) reported by RTC were only obtained when the U.S.EPA method 3060A without the addition of Mg²⁺ and DPC analysis at pH 1.0 were applied. The latter procedure appears questionable since it leads to largely variable results which reflect the complex role played by humic matter in the determination of Cr(VI) and the instability of Cr(III) during the extraction.     

Real‐time lock‐in energy loss imaging with a novel high‐speed image processing CCD video camera

We have developed a high‐speed image processing CCD video camera for real‐time energy‐loss imaging using a conventional electron microscope with an energy‐loss imaging facility. As an initial demonstration of real‐time lock‐in energy‐loss imaging, a background‐subtracted energy‐loss image was observed by attaching the high‐speed image processing CCD video camera to an analytical electron microscope equipped with a floating‐type energy‐loss imaging analyser. Copyright © 2003 John Wiley & Sons, Ltd.     

Simultaneous extraction of organotin, organolead and organomercury species from soils and litter

Extracting organotin compounds (OTC) from soils is difficult due to the high cation exchange and complexation capacity of soils, and little information about OTC in soils is available. In this study, a new extraction method, combining 1 M CaCl₂, 0.1% tropolone, and glacial acetic acid was developed. Recoveries of mono-substituted OTC from spiked plant litter, and soil samples were improved substantially to 40% compared to classical glacial acetic acid extraction commonly used in sedimentology, yielding <10% recovery in C-rich soil samples. Simultaneously, the recovery of other OTC, trimethyllead and monomethylmercury was satisfactory. The recoveries of most species from the spiked litter, upland and wetland soils exceeded 70%. The new method extracted much more organometallics from unspiked organic soils and litter than microwave- and ultrasound-assisted extraction and accelerated solvent extraction, most likely due to exchange of organometallics from the solid phase by Ca²⁺. The method is simple, highly efficient and with low contamination. Together with GC-ICP-mass spectrometry, the method allows the detection of these organometallics in the pg g⁻¹ range and it is particularly suitable for soil and plant materials with low organometallics contents.     

Catalytic Kinetic Spectrophotometric Method for Determination of Phosphate Ion

The kinetic method for the determination of phosphate microamounts was described. The developed method is based on catalytic effect of phosphate on sodium pyrogallol-5-sulphonate （PS） by dissolved oxygen. The reaction was followed spectrophotometrically by measuring the rate of change in the values of the absorbance of the oxidation product at 437 nm. The optimum reaction conditions are PS （0.44×10^-3 mol·L^-1） and HClO4 （3.6×10^-6 mol·L^-1） at 25 ℃. Following this procedure, phosphate can be determined with a linear calibration graph up to 0.23 μg·mL^-1. The interference effect of several species was also investigated and it was found that the most common cations and anions did not interfere with the determination. The developed procedure was successfully applied to the determination of phosphate in natural waters and soil.     

Development of a systems analysis approach for resolving the structure of biodegrading soil systems

An experimental and mathematical method is developed for the microbial systems analysis of polyaromatic hydrocarbon (PAH)-degrading mixed cultures in PAH-contaminated “town gas” soil systems. Frequency response is the primary experimental and data analysis tool used to probe the structure of these complicated systems. The objective is to provide a fundamental protocol for evaluating the performance of specific mixed microbial cultures on specific soil systems by elucidating the salient system variables and their interactions. Two well-described reactor systems, a constant volume stirred tank reactor (CSTR) and a plug flow differential volume reactor, are used in order to remove performance effects that are related to reactor type as opposed to system structure. These two reactor systems are well-defined systems that can be described mathematically and represent the two extremes of one potentially important system variable, macroscopic mass transfer. The experimental and mathematical structure of the protocol is described, experimental data is presented, and data analysis is demonstrated for the stripping, sorption, and biodegradation of napththalene.     

Characterization of gem-difluoropropargyl synthons through HF loss from protonated molecules in methane chemical ionization mass spectra

Electron impact and methane chemical ionization mass spectra were obtained following gas chromatography/mass spectrometry for several gem-difluoropropargyl compounds, which had been synthesized as potential intermediates for synthesis of gem-difluoromethylene-containing C-3 acetylenes. EI spectra were variable with respect to the presentation of molecular ions, depending on substituent functional groups present. Methane-CI spectra were characterized by loss of 19 mass units from molecular weight with all compounds examined. These [M − 19]⁺ ions often presented as base peaks of the CI spectra, and were more reliably present and abundant than [M + 1]⁺ ions for these compounds. These ions could have been formed by elimination of HF from the protonated molecules under conditions of methane chemical ionization.     

A comparative study of solvent extraction of total petroleum hydrocarbons in soil

Three non-specific methods for the extraction of total petroleum hydrocarbons (TPH) from soil into organic solvent were compared. The techniques used for sample preparation were Soxhlet extraction, closed-vessel microwave-assisted extraction, and CEN shake extraction. The total concentrations of extracted compounds in the boiling point range of C10–C40 were determined by gas chromatography with flame ionization detection. The best recovery (99%) and repeatability (±3%) from standard oil mixtures were obtained with microwave-assisted extraction. However, the different extraction methods exhibited different behaviour when spiked soil samples were extracted. The best repeatability was obtained with CEN shake extraction (±6%) but the repeatability values for Soxhlet and microwave-assisted methods were quite high (>20%). However, the larger uncertainties of the latter extraction methods does not necessarily limit the applicability of these methods to the determination of petroleum hydrocarbons in soil, as in the assessment of soil contamination the expanded uncertainty of the result is usually not limited by analytical uncertainty, but rather by the uncertainty of the primary sampling stage. However, distinctive variation found in the chromatographic profiles illustrates that discretion should be obeyed when chromatograms obtained after application of different extraction methods on petroleum contaminated samples are to be used in the fingerprinting or age dating studies. Otherwise, misleading conclusions concerning the age of spillage could be drawn.     

痕量砷流动注射在线还原氢化物发生原子吸收测定

方法采用流动注射停流技术使水及土壤浸出液中Ａｓ（Ｖ）在线还原为Ａｓ（Ⅲ），不经手工还原，用氢化物发生原子吸收光谱法直接测定砷的含量。含４ｍｏｌ／Ｌ ＨＣｌ的样品溶液与３０％碘化钾溶液在编结式反应器中混合，并在采样环中停流４０ｓ，达完全还原后注入到载流中与硼氢化钠反应，采样速度５５次／ｈ，检出限（３δ）０．１μｇ／Ｌ，对自来水和土壤浸出液的加标回收结果满意。     

Tuning the Hybridization of Local Exciton and Charge-Transfer States in Highly Efficient Organic Photovoltaic Cells

Decreasing the energy loss is one of the most feasible ways to improve the efficiencies of organic photovoltaic (OPV) cells. Recent studies have suggested that non-radiative energy loss ( ) is the dominant factor that hinders further improvements in state-of-the-art OPV cells. However, there is no rational molecular design strategy for OPV materials with suppressed . Herein, taking molecular surface electrostatic potential (ESP) as a quantitative parameter, we establish a general relationship between chemical structure and intermolecular interactions. The results reveal that increasing the ESP difference between donor and acceptor will enhance the intermolecular interaction. In the OPV cells, the enhanced intermolecular interaction will increase the charge-transfer (CT) state ratio in its hybridization with the local exciton state to facilitate charge generation, but simultaneously result in a larger . These results suggest that finely tuning the ESP of OPV materials is a feasible method to further improve the efficiencies of OPV cells.     

Construction of database of effective energy‐loss functions

Effective energy‐loss functions for Al, Cu, Ag and Au were derived from the reflection electron energy‐loss spectroscopy (REELS) spectra for 1 keV electrons using extended Landau theory. Features of the obtained effective energy‐loss functions are close to those of optical surface energy‐loss functions, revealing the significant contribution of the low energy loss below a few tens of electron‐volts in the REELS spectrum for Cu, Ag and Au. The REELS spectra were reproduced using the newly derived effective energy‐loss functions, leading to the confirmation that this type of database of the effective energy‐loss function is very useful not only for more comprehensive understanding of the measured spectrum of surface electron spectroscopies but also for practical background subtraction in surface electron spectroscopy. Copyright © 2003 John Wiley & Sons, Ltd.