Synthesis and characterization of liquid‐crystalline polyphosphonates containing disubstituted ferrocene esters as mesogens

A series of ferrocene‐containing liquid‐crystalline polyphosphonates with an even number of methylene groups are reported. All the polymers gave birefringent melts. The mesophase was identified as transparent with an increase in the spacer. The effects of pendant substitution and the spacer were studied with thermogravimetric analysis and differential scanning calorimetry. The effects of the phosphonate group in the spacer and the ferrocene ester group in the mesogen were examined. The presence of a steplike mesogenic structure and a pendant phenyl group in the spacer led to reductions in the glass‐transition and melting temperatures. The ferrocene moiety in the mesogen might be one of the reasons for the increased thermal stability and decreased liquid crystallinity. An energy‐minimized structure for the mesogenic and spacer segments was created with computer‐modeling programs, and it suggested the reason for the reductions in the glass‐transition and melting temperatures. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2256–2263, 2002     

人血清中地尔硫高效液相色谱法测定及药代动力学参数

建立了反相高效液相色谱法监测人口服地尔硫艹卓缓释片后血药浓度。血样用正己烷－氯仿－异丙醇混合溶剂（６０４０５）提取后，以Ｃ１８化学键合硅胶为固定相，甲醇－水－三乙胺为流动相，安定为内标，在２３９ｎｍ波长处定量检测。血药浓度在１５～３００μｇ／Ｌ范围内线性关系良好，最低检测浓度为３μｇ／Ｌ。批内（ｎ＝７）及批间（ｎ＝５）测定相对标准偏差分别小于６．８％和８．４％，回收率为９１％～１０４％。监测了８名健康人口服盐酸地尔硫艹卓缓释片后的不同时间的血药浓度变化，计算了有关的药代动力学参数。     

Studies on the phase properties of lyotropic liquid crystals of Brij35/sodium oleate/oleic acid/water system:By means of polarizing microscope,SAXS,~2H-NMR and rheological methods

The pseudo-quaternary phase diagram of Brij35/sodium oleate/oleic acid/water systems has been investigated, and the liquid crystal area has been identified, which covers about two thirds of the whole phase diagram. The liquid crystal structure and behavior have been also studied by using polarizing texture, small angle X-ray scattering, 2H-NMR and rheometer etc. The result shows that when the composition of the system changes along the line of AA′ in this large liquid crystal region, the structural change is cubic→cubic/lamellar→lamellar→lamellar/hexagonal→hexagonal. Meanwhile, we made the first attempt of systematic study of the rheological properties of the above system. The lattice constants of cubic and hexagonal liquid crystals are 10.53 and 5.68 nm, respectively.     

meso-四(对烷氧苯基)卟啉金属配合物的合成和性能研究(IV)

合成了系列卟啉乙酸合锰配合物9个,其中6个为未见文献报道的新化合物.用UV,1HNMR,IR,MS,元素分析等表征确证了配合物的结构,总结了锰与卟啉类配体配合的IR,UV,1HNMR判据.采用差示扫描量热法(DSC)和偏光显微镜(PM)研究了该系列配合物的液晶性能,发现8个配合物具有液晶性.考察了烷氧基链长、配位金属离子和分子空间结构对液晶性能的影响.     

A novel gel polymer electrolyte based on poly ionic liquid 1-ethyl 3-(2-methacryloyloxy ethyl) imidazolium iodide

Poly ionic liquid 1-ethyl 3-(2-methacryloyloxy ethyl) imidazolium iodide (PEMEImI) as a single-ion conductor was designed and synthesized. When appropriate amount of suitable plasticizers, I₂ and polyacrylonitrile (PAN) were incorporated into it, the complex formed gel polymer electrolyte. Chemical structure, thermal behavior and ionic conductive properties of the gel polymer electrolyte were investigated by Raman spectra, UV-Vis spectra, differential scanning calorimetry (DSC), and complex impedance analysis, respectively. For the new gel polymer electrolyte, the ionic conductivity of about 1 × 10⁻³ S cm⁻¹ at room temperature was achieved.     

PET-HBT嵌段热致性液晶共聚酯的合成

液晶高分子材料具有相当高的强度和模量，被誉为当代超级工程塑料．以对羟基苯甲酸甲酯、1，4-丁二醇为主要原料，经熔融酯交换合成双-对羟基苯甲酸丁二醇酯(BBHB)；以四氯乙烷为溶剂，采用溶液缩聚法将过量的BBHB与对苯二甲酰氯(TPC)合成端基为BBHB的齐聚物(PHBT)；以对苯二甲酸二甲酯与乙二醇为原料，经熔融酯交换合成对苯二甲酸双β-羟乙酯(BHET)，然后采用溶液缩聚法将BHET与少量的TPC合成端基为TPC的齐聚物(PTET)；最后以PHBT与PTET为原料，以四氯乙烷为溶剂，采用溶液缩聚法合成目标共聚酯(PET-HBT)。研究了共聚酯的双折射现象及热行为；用偏光显微镜观察了试共聚酯的织态结构并用FTIR表征了共聚酯的微观结构．     

A Three-Dimensional Two-Phase Model for Thermal Plasma Chemical Vapor Deposition with Liquid Feedstock Injection

In this paper, a comprehensive model for thermal plasma chemical vapor deposition (TPCVD) with liquid feedstock injection is documented. The gas flow is assumed to be steady, of a single temperature. Radiation and charged species contributions are excluded, but extensive homogeneous and heterogeneous chemistry is included. The liquid phase is traced by considering individual droplets. Discussion on the model's application to diamond production from acetone in a hydrogen–argon plasma is included. The major conclusions are: (1) Liquid injection possesses a capability to deliver the hydrocarbon precursor directly onto the deposition target. (2) For the case of complete evaporation of the droplet before reaching the substrate, the deposition rate is similar to that obtained with gaseous precursors. (3) The computational results compare well with experimental data. The modeling results can be used to optimize the injection parameters with regard to the deposition rate.     

胆甾液晶／聚合物多组分体系的结构与性能研究（Ⅲ）──ChN／poly（MMA－CO－BMA）混合体系的形态结构

应用Ｘ射线衍射、偏光显微镜及电子显微镜研究了胆甾液晶与甲基丙烯酸甲酯（ＭＭＡ）─甲基丙烯酸丁酯（ＢＭＡ）无规共聚物共混体系的形态结构。研究了体系的结晶态及液晶态的行为和共聚物含量及组成对光学织构的影响。     

液/液两相催化新进展--温控非水液/液两相催化

温控非水液/液两相催化,是指一类由两种或多种液态有机物组成的催化反应体系,其特点是体系的相态变化可通过温度来调控,即体系在高温时相互混溶呈均相,低温不溶分成两相,催化剂和产物分别处于两相,从而为解决均相催化剂分离难的问题开拓了一个新方向,是液/液两相催化研究领域最引人注目的进展之一.首次以"温控"为主线将氟两相催化作为温控液/液两相催化的一个特定类型纳入"温控非水液/液两相催化"范畴,并与其它通过温度来调控的有机液/液两相和作者提出的温控相分离催化串在一起作一较为详细的评述.