Statistical experimental design-driven discovery of room-temperature conditions for palladium-catalyzed cyanation of aryl bromides

A combination of Pd₂(dba)₃·CHCl₃ (0.5 mol %) and commercially available, air-stable phosphonium salt [(t-Bu)₃PH]BF₄ (1.4 mol %) in a presence of Zn powder and Zn(CN)₂ as the cyanide source comprises an extremely efficient catalyst system for the cyanation of a diverse array of aryl bromides, at room temperature. This result emerged from an experimental strategy that combines the advantages of parallel, automated experimentation with the design of experiments (DOE) for the effective definition of an optimal set of reaction conditions.     

Development of a novel potentiometric titration method for determination of polypropylene degradation

In this study, a novel potentiometric titration of hydroperoxide in degraded polypropylene (PP) is proposed. This titration is quite sensitive compared with the conventional ones such as UV and manual titrations, and its detection limit was about 2 meq/kg. The sensitivity was equal to that of molecular weight measurement by GPC for the degraded PP and, in addition, the volatilization behavior of the hydroperoxide could be detected. This titration was found to be very effective for the determination of PP degradation.     

Development of a method for estimating an accurate equivalence point in nickel titration of cyanide ions

In a nickel titration of cyanide ions using murexide as indicator, an accurate equivalence point was determined by a non-linear least-squares curve-fitting for a titration curve. This method was developed to establish a standard solution for cyanide ions. In a curve-fitting procedure, a theoretical titration curve was calculated, assuming that nickel ion formed only a 1:4 Ni²⁺:CN⁻ complex with cyanide ions and formed only a 1:1 complex with murexide. Results of the curve-fitting were reasonable at any pH and any indicator concentration studied. The combined standard uncertainty for a concentration of a 1000 mg kg⁻¹ cyanide solution by this method was 0.079%.     

Thermodynamics of Binary and Ternary Copper-, Cadmium,and Indium-Containing Semiconducting Phases: An Electrochemical Study

Optimum compositions of ion-selective membranes in quasi-binary systems CuCl-CdCl₂, LiCl-CdCl₂, and In₂S₃-InCl₃ are selected by a method of coulometric titration in cells with solid electrolytes. Transport numbers for ions are close to unity for the optimum compositions; transport numbers for electrons are vanishingly small ( ≺10⁻³ to 10⁻⁴); the electroconductivity is equal to ≈ 10⁻³ S cm⁻¹ at 200°C; the diffusion coefficients for the current-producing component are on the order of 10⁻⁶ to 10⁻⁷ cm² s⁻¹. When using a solid electrolyte of the composition CuCl-CdCl₂, which contains 30 mol % CdCl₂, methods of emf and electroconduction reveal that the region of homogeneity of copper(I) selenide falls in the region of compositions Cu_1.33Se-Cu_2.67Se.__________Translated from Elektrokhimiya, Vol. 41, No. 6, 2005, pp. 721–727.Original Russian Text Copyright © 2005 by Leushina, Kolesnikova, Makhanova, Zlomanov.Published on the basis of a report delivered at the VII Meeting on Fundamental Problems in Solid-State Ionics (Chernogolovka-2004).     

Determination of cationic polyelectrolytes using a photometric titration with crystal violet as a color indicator

The reaction of the cationic dye, crystal violet (CV) with the anionic polyelectrolytes such as potassium poly (vinyl sulfate) (PVSK) results in a decrease of the absorbance of CV at the maximum absorption wavelength (590 nm). This change of the absorption spectra of the CV has been already applied to the determination of anionic polyelectrolytes using flow injection analysis method. In this paper, CV was applied to the indicator for the determination of cationic polyelectrolytes such as poly (diallyldimethylammonium chloride) (Cat-floc) by photometric titration, using a PVSK solution as a titrant. The end-point of the titration is detected as the break point of the titration curve. A linear relationship between the concentration of cationic polyelectrolyte and the end-point volume of the titrant exists in the concentration range from 0 to 5×10⁻⁵ eq. mol dm⁻³ for Cat-floc, glycol chitosan and methylglycol chitosan. The effects of the concentration of CV and coexisting electrolytes in the sample solution and the effect of pH of the sample solution on the degree of the change of absorbance at the end-point were also examined.     

Formation Thermodynamics of Binary and Ternary Lanthanide(III) Complexes with 1,10-Phenanthroline and Chloride in N,N-Dimethylformamide

Formation thermodynamics of binary and ternary lanthanide(III) (Ln = La, Ce, Nd, Eu, Gd, Dy, Tm, Lu) complexes with 1,10-phenanthroline (phen) and the chloride ion have been studied by titration calorimetry and spectrophotometry in N,N-dimethyl-formamide (DMF) containing 0.2 mol-dm^–3 (C₂H₅)₄NClO₄ as a constant ionic medium at 25°C. In the binary system with 1,10-phenanthroline, the Ln(phen)³⁺ complex is formed for all the lanthanide(III) ions examined. The reaction enthalpy and entropy values for the formation of Ln(phen)³⁺ decrease in the order La > Ce > Nd, then increase in the order Nd < Eu < Gd < Dy, and again decrease in the order Dy > Tm > Lu. The variation is explained in terms of the coordination structure of Ln(phen)³⁺ that changes from eight to seven coordination with decreasing ionic radius of the metal ion. In the ternary Ln³⁺-Cl^–-phen system, the formation of LnCl(phen)²⁺, LnCl₂(phen)⁺, and LnCl₃(phen) was established for cerium(III), neodymium(III), and thulium(III), and their formation constants, enthalpies, and entropies were obtained. The enthalpy and entropy values are also discussed from the structural point of view.     

芥子气纯度测定不确定度分析与评定

采用酸碱滴定法测定芥子气纯度,对测量结果的不确定度进行评定。分析了测定过程中不确定度来源,包括滴定剂的标定、消耗滴定剂体积、样品称量等引入的不确定度及其计算方法,最后合成得到标准不确定度。当芥子气纯度测定结果为94.78%时,扩展不确定度为0.34%(k=2)。实验结果表明,样品称量引入的不确定度对测量结果的影响最大。     

Preparation and Superconductivity of a Series of Bi2CaSr2-XBaxCu2O8+δ

By means of the addition of Ba into the Bi-Ca-Sr-Cu-O 2122 system, a series of Bi₂CaSr_2-xBa_xCu₂O_8+δ (0 ≤ × ≤ 2) quinary metal oxides were prepared by the citrate route and by the conventional powder reaction method. The samples prepared by the former method have better properties than the latter. It was found that 5 was not equal to zero for all of them and that it increased with decreasing Tc. Two phases were indentified in the oxides containing all five metal elements. One is the Bi-Ca-Sr-Cu-O 2122 phase, the other is a new insulating phase which probably contains Bi-Ca-Ba-Cu-O with undetermined stoichiometry. Superconductivity was found in those samples for which × ≤ 1.50 with their Tc onsets between 93–78 K by resistivity measurements. Superconductivity decreased monotonically with increasing x. However, residual resistance was found in those samples for which 1.00 ≤ × ≤ 1.50, The Meissner effect appears in the samples where × ≤ 1.00 with Tc onsets between 88–80 K. For x = 1.75 and 2.00, the samples were semiconductors with resistivities of 6.66 × 10² and 6.96 × 10³ Ω cm at 290 K, and activation energies of 0.109, and 0.298 eV, respectively.     

Correlation between Solution and the Solid State: The pH Dependent Composition in the Ternary System [Co(H2O)6]2+ or [Ni(H2O)6]2+/Piperazine/Phosphate

The protolytic equilibria of piperazine (C₄H₁₀N₂) and phosphate have been investigated in the presence of cobalt or nickel chloride or nitrate by potentiometric titrations between pH 2 and 8. Potentiometric titrations suggest the presence of [M²⁺(H₂O)₅(C₄H₁₁N₂⁺)]³⁺ and [M²⁺(H₂O)₅(C₄H₁₀N₂)]²⁺ in solution with stability constants logK of 3.1 and 3.8 for M = Co and 3.1 and 3.6 for M = Ni, respectively. Crystallization experiments were then conducted at selected pH values to isolate desired species from the known solution composition. Crystallization afforded [M(H₂O)₆]²⁺(C₄H₁₂N₂²⁺)(HPO₄^2—)₂ at pH 3.5 and 6.2 (M = Co, Ni), and Co₃(PO₄)₂·8H₂O at pH 10.5. No crystals with the dihydrogenphosphate anion or a metal‐bound piperazine ligand could be isolated under the reaction conditions. The solid‐state assembly in the isomorphous structures of [M(H₂O)₆](C₄H₁₂N₂)(HPO₄)₂ with M = Co and Ni is based on an extended hydrogen bonded network between the three ionic building blocks.     

Redox-iodometry: a new potentiometric method

A new iodometric method for quantifying aqueous solutions of iodide-oxidizing and iodine-reducing substances, as well as plain iodine/iodide solutions, is presented. It is based on the redox potential of said solutions after reaction with iodide (or iodine) of known initial concentration. Calibration of the system and calculations of unknown concentrations was performed on the basis of developed algorithms and simple GWBASIC-programs. The method is distinguished by a short analysis time (2–3 min) and a simple instrumentation consisting of pH/mV meter, platinum and reference electrodes. In general the feasible concentration range encompasses 0.1 to 10^–6 mol/L, although it goes down to 10^–8 mol/L (0.001 mg Cl₂/L) for oxidants like active chlorine compounds. The calculated imprecision and inaccuracy of the method were found to be 0.4–0.9% and 0.3–0.8%, respectively, resulting in a total error of 0.5–1.2%. Based on the experiments, average imprecisions of 1.0–1.5% at c(Ox)>10^–5 M, 1.5–3% at 10^–5 to 10^–7 M, and 4–7% at <10^–7 M were found. Redox-iodometry is a simple, precise, and time-saving substitute for the more laborious and expensive iodometric titration method, which, like other well-established colorimetric procedures, is clearly outbalanced at low concentrations; this underlines the practical importance of redox-iodometry.

---

An erratum to this article is available at .