流动注射电位滴定研究：氟化物沉淀滴定测锂

设计制作了一种简便的梯度混合室,并考察了其性能,试验结果证实了此混合室的合理性和有效性.用此混合室建立了流动注射电位滴定测锂的新方法,载流为1×10~(-5)～1×10~(-4)mol·L~(-1)的F~乙醇-水(9 1)溶液,流速4.2ml·min~(-1),混合室体积400μl,进样体积120μl,分析速度60样·h~(-1),检出范围取决于载流中滴定剂的浓度,方法用于卤水中锂的测定,结果令人满意.     

磷肥中有效磷的示波滴定

根据Ｐｂ２＋能与ＰＯ＿４￣（３－）定量形成沉淀，过量的Ｐｂ２＋在ＮａＣｌＯ３－六次甲基四胺底液示波图上有敏锐切口的性质，报告了磷肥中有效磷含量测定的示波滴定新方法。该法与通用方法相比较，具有操作简便、测定快速、终点直观的优点。     

倒数示波计时电位滴定新技术

倒数交流示波极谱具有抑制充电电流、突出电解电流的优点,利用(dE/dt)~(-1)-E曲线上去极剂峰的突然消失或出现指示滴定终点的方法称作倒数示波计时电位滴定法.由运算放大器组装的模拟电子线路可以对(dE/dt)~(-1)-E曲线进行反馈、反对数及微分处理,从而获得各种类型的倒数示波计时电位曲线(图1),以进一步提高滴定的灵敏度。     

On the conformational stability and dimerization of phosphotransferase enzyme I from Escherichia coli

The activity of enzyme I (EI), the first protein in the bacterial PEP:sugar phosphotransferase system, is regulated by a monomer–dimer equilibrium where a Mg²⁺-dependent autophosphorylation by PEP requires the homodimer. Using inactive EI(H189A), in which alanine is substituted for the active-site His189, substrate binding effects can be separated from those of phosphorylation. Whereas 1 mM PEP (with 2 mM Mg²⁺) strongly promotes dimerization of EI(H189A) at pH 7.5 and 20 °C, 5 mM pyruvate (with 2 mM Mg²⁺) has the opposite effect. A correlation between the coupling of N- and C-terminal domain unfolding, measured by differential scanning calorimetry, and the dimerization constant for EI, determined by sedimentation equilibrium, is observed. That is, when the coupling between N- and C-terminal domain unfolding produced by 0.2 or 1.0 mM PEP and 2 mM Mg²⁺ is inhibited by 5 mM pyruvate, the dimerization constant for EI(H189A) decreases from >10⁸ to <5 × 10⁵ or 3 × 10⁷ M⁻¹, respectively. With 2 mM Mg²⁺ at 15–25 °C and pH 7.5, PEP has been found to bind to one site/monomer of EI(H189A) with K_A′10⁶ M⁻¹ (ΔG′=−33.7±0.2 kJ mol⁻¹ and ΔH=+16.3 kJ mol⁻¹ at 20 °C with ΔC_p=−1.4 kJ K⁻¹ mol⁻¹). The binding of PEP to EI(H189A) is synergistic with that of Mg²⁺. Thus, physiological concentrations of PEP and Mg²⁺ increase, whereas pyruvate and Mg²⁺ decrease the amount of dimeric, active, dephospho-enzyme I.     

A thermodynamic and structural study of the interactions of pyridino- and diketopyridino-18-crown-6 ligands with some primary organic ammonium cations

Equilibrium constant (K), enthalpy change (H), and entropy change (S) values have been determined calorimetrically at 25°C in 90%MeOH 10%H₂O (v/v) for the interactions of pyridino-18-crown-6 (P18C6) and diketopyridino-18-crown-6 (K₂P18C6) with perchlorate salts of ammonium, benzylammonium,-phenylethylammonium,-phenylethylammonium, and-(1-naphthyl)ethyl-ammonium cations. The crystal structure of the complex of P18C6 with benzylammonium perchlorate was determined by X-ray crystallography. The¹H 1D and 2D NMR spectra of some of these complexes were used to elucidate their structural features in solution. The logK values for the interaction of the ammonium cations with P18C6 are larger than those with K₂P18C6, probably due to the higher degree of structural flexibility of P18C6. Ligand K₂P18C6 displays appreciable - interaction with the-(1-naphthyl)ethylammonium cation, but not with the-phenylethylammonium cation.- interaction between ligand and cationSupplementary Data relating to this article are deposited with the British Library as Supplementary Publication No SUP 00000 (22 pages)     

Diffusion layer titration of dipyrone in pharmaceuticals at a dual-band electrochemical cell

This paper describes the use of a thin-layered dual-band electrochemical cell operating at flow conditions to determine dipyrone (sodium salt of 1-phenil-2,3-dimethyl-4-methylaminomethanesulfonate-5-pyrazolone) by reaction with electrogenerated iodine. The electrolytic cell consisted of two closely spaced gold electrodes, the upper stream electrode serving as the generator electrode and the downstream electrode working as the collector electrode. A linear dynamic range from 2 to 15 μmol l⁻¹ dipyrone was obtained by using a sample volume of 100 μl, with a detection limit of 1.1 μmol l⁻¹. Standard deviation (S.D.) of 3.4% for 20 repetitive injections of a 40 μmol l⁻¹ dipyrone solution and sampling frequency of 90 h⁻¹ were achieved. The results obtained with the thin-layered dual-band electrochemical cell for dipyrone determination in three different pharmaceutical samples compared well with those found by iodimetry with coulometrically generated iodine.     

非水滴定法测定苯唑醇含量的研究

建立了农药中间体苯唑醇的分析方法，用指示剂法和电位法对苯唑醇进行了非水滴定的研究，测定结果与高效液相色谱(HPLC)法基本一致，相对标准偏差≤0．20％。     

Binary and Ternary Complexes Between Lauryl Hexaoxyethylene, Benzoate and Cyclodextrin. Part II. β-CD

The characterization of binary and ternary complexes of benzoate, lauryl hexaoxyethylene (C₁₂E₆) and -CD is presented. The complexation equilibrium was characterized by UV-Vis spectrophotometry, titration microcalorimetry, capillary electrophoresis, and 2D ROESY ¹H-NMR. Results suggested that -CD forms one complex with C₁₂E₆in the stoichiometric ratio of -CD : C₁₂E₆1.5 : 1, with a stability constant 1.3 × 10⁵ M^-1.5. The 2-D ROESY ¹H-NMR spectrum indicated that C₁₂E₆is included inside the -CD cavity. The primary binding site of C₁₂E₆ is on the lauryl subunit of this molecule. Analogous to a previously reported study of -CD, the combination of -CD and C₁₂E₆precipitated from the solution. Addition of benzoate seemed to dissolve the precipitate and nearly doubled the apparent stability constant of the complex. Results from the various techniques supported formation of ternary complexes between -CD, C₁₂E₆, and benzoate.     

倍数光度滴定法测定微量过氧化苯甲酰

联合应用BPO与KIO3(在KI存在下)的倍增反应和光度滴定数据的二阶导数法处理,使面粉中微量BPO测定的灵敏度较常规碘量法提高了200倍,方法的检出限可达0.1 mg.L-1。在面粉实样分析中,测定结果的RSD值在1.3%~2.8%之间,加标回收率在98.6%~102.2%之间。提出的方法所得测定结果与国标法(GB/T 18415-2001)所得结果一致。     

Extraction of Pb(II), Cd(II), and Hg(II) from aqueous solution by nitrogen and thiol functionality grafted to silica gel measured by calorimetry

The reaction of ethylene sulfide with 3-aminopropyltrimethoxysilane gave a new silylating agent, which was anchored onto a silica surface via the sol–gel procedure. This surface displayed a chelating moiety containing nitrogen and two sulfur basic centers potentially capable of extracting cations from aqueous solutions. The process of metal extraction was followed by a batch method, and fitted to a modified Langmuir equation. The maximum adsorption capacities found were: 2.06 ± 0.01, 3.72 ± 0.02, and 5.14 ± 0.02 mmol g⁻¹ for Pb(II), Cd(II), and Hg(II), respectively. The enthalpies of bending are: −1.16 ± 0.04, −3.60 ± 0.10, and −8.94 ± 0.03 kJ mol⁻¹ for Cd(II), Pb(II), and Hg(II), respectively. The Gibbs free energies of binding agree with the spontaneity of the proposed reactions between cations and basic centers.