Critical Evaluation of Adsorption–Desorption Hysteresis of Heavy Metal Ions from Carbon Nanotubes: Influence of Wall Number and Surface Functionalization

Single‐, double‐, and multi‐walled carbon nanotubes (SWCNTs, DWCNTs, and MWCNTs), and two oxidized MWCNTs with different oxygen contents (2.51 wt % and 3.5 wt %) were used to study the effect of the wall number and surface functionalization of CNTs on their adsorption capacity and adsorption–desorption hysteresis for heavy metal ions (Ni^II, Cd^II, and Pb^II). Metal ions adsorbed on CNTs could be desorbed by lowering the solution pH. Adsoprtion of heavy metal ions was not completely reversible when the supernatant was replaced with metal ion‐free electrolyte solution. With increasing wall number and amount of surface functional groups, CNTs had more surface defects and exhibited higher adsorption capacity and higher adsorption–desorption hysteresis index (HI) values. The coverage of heavy metal ions on the surface of CNTs, solution pH, and temperature affect the metal ion adsorption–desorption hysteresis. A possible shift in the adsorption mechanism from mainly irreversible to largely reversible processes may take place, as the amount of metal ions adsorbed on CNTs increases. Heavy metal ions may be irreversibly adsorbed on defect sites.     

Supramolecular Complexes of Multivalent Cholesterol‐Containing Polymers to Solubilize Carbon Nanotubes in Apolar Organic Solvents

Copolymers of 2‐ethylhexyl acrylate (EHA) and cholesteryloxycarbonyl‐2‐hydroxymethacrylate (CEM) were prepared by reversible addition–fragmentation chain‐transfer (RAFT) polymerization. Supramolecular complexes of these copolymers with carbon nanotubes (CNTs) were soluble in THF, toluene, and isooctane. The colloidal solutions remained stable for months without aggregation. The rationale for the choice of CEM was based on the high adsorption energy of cholesterol on the CNT surface, as computed by DFT calculations. Adsorption isotherms were experimentally measured for copolymers of various architectures (statistical, diblock, and star copolymers), thereby demonstrating that 2–5 cholesterol groups were adsorbed per polymer chain. Once the supramolecular complex had dried, the CNTs could be easily resolubilized in isooctane without the need for high‐power sonication and in the absence of added polymer. Analysis by atomic force microscopy (AFM), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) indicated that the CNTs were devoid of bundles. The supramolecular complexes could also be employed in an inverse emulsion polymerization of 2‐hydroxyethylmethacrylate (HEMA) in isooctane and dodecane, thereby leading to the formation of a continuous polymeric sheath around the CNTs. Thus, this technique leads to the formation of very stable dispersions in non‐polar organic solvents, without altering the fundamental properties of the CNTs.     

Relation between Morphology and Photoelectrochemical Performance of TiO2 Nanotubes Arrays Grown in Ethylene Glycol/Water

The TiO₂ nanotube films were prepared by anodizing Ti plates in 0.2 M NH₄F ethylene glycol/10% H₂O under different formation voltages keeping fixed the time length, or by keeping fixed the formation voltage and varying the time length. The morphology of the TiO₂ film obtained was observed by SEM images and different morphological parameters were derived from them. Furthermore, the optical and semiconducting properties of TiO₂ films were also measured. The photoelectrochemical performance toward water oxidation of the TiO₂ only showed to be dependent with the inner diameter of the nanotubes, that could be related to the interaction of the film with the light and the transport of species in the electrolyte inward or outward the film.     

Research of Fluorination Process of Rutile Concentrate

The brief review of industrial technologies of titanium-containing concentrates processing has been carried out. Drawbacks of the existing titanium manufacture schemes are shown and the necessity of the essentially new fluoride technologies development has been proved. The reactions proceeding during the fluorination of rutile concentrate with element fluoride are described in the given work. The thermodynamic research of the process has been carried using ASTRA software. Dependence of mass concentration change of titanium tetrafluoride has been investigated in products of reaction on the temperature of the process, and the choice of optimum excess of fluoride has been proved.     

Chiral Monolithic Absorbent Constructed by Optically Active Helical‐Substituted Polyacetylene and Graphene Oxide: Preparation and Chiral Absorption Capacity

Chiral monolithic absorbent is successfully constructed for the first time by using optically active helical‐substituted polyacetylene and graphene oxide (GO). The preparative strategy is facile and straightforward, in which chiral‐substituted acetylene monomer (Ma), cross‐linker (Mb), and alkynylated GO (Mc) undergo copolymerization to form the desired monolithic absorbent in quantitative yield. The resulting monoliths are characterized by circular dichroism, UV–vis absorption, scanning electron microscopy (SEM), FT‐IR, Raman, energy‐dispersive spectrometer (EDS), X‐ray diffraction (XRD), Brunauer–Emmett–Teller (BET), XPS, and thermogravimetric analysis (TGA) techniques. The polymer chains derived from Ma form chiral helical structures and thus provide optical activity to the monoliths, while GO sheets contribute to the formation of porous structures. The porous structure enables the monolithic absorbents to demonstrate a large swelling ratio in organic solvents, and more remarkably, the helical polymer chains provide optical activity and further enantio‐differentiating absorption ability. The present study establishes an efficient and versatile methodology for preparing novel functional materials, in particular monolithic chiral materials based on substituted polyacetylene and GO.

     

Biomimetic Mussel Adhesive Inspired Anchor to Design ZnO@Poly(3‐Hexylthiophene) Hybrid Core@Corona Nanoparticles

The functionalization of zinc oxide (ZnO) nanoparticles by poly(3‐hexylthiophene) (P3HT) brush is completed by the combination of a mussel inspired biomimetic anchoring group and Huisgen cyclo‐addition “click chemistry.” Herein, the direct coupling of an azide modified catechol derivative with an alkyne end‐functionalized P3HT is described. This macromolecular binding agent is used to access core@corona ZnO@P3HT with a stable and homogeneous conjugated organic corona. Preliminary photoluminescence measurement proves an efficient electron transfer from the donor P3HT to the acceptor ZnO nanoparticles upon grafting, thus demonstrating the potential of such a combination in organic electronics.

     

固态氧化物电解池中碳-分子电化学转化为可再生燃料

近年来,随着社会环保意识的迅速提高以及对可再生能源利用能力的大幅增强,以燃料电池和电解池为代表的电化学技术已经逐渐在能源的存储、转化和利用方面发挥着不可或缺的独特作用.其中,固态氧化物电解池经过多年的发展,在装置成本和工作效率上取得了长足的进步,在储能转化方面具有重要的潜力.与此同时,伴随着《巴黎协定》签订以来各国的“碳中和”路线图逐渐出台,利用相对廉价易得的可再生电能,将二氧化碳(CO₂)和甲烷(CH₄)等碳-(C1)分子电解转化为高附加值的可再生燃料(如水煤气、乙烯等),对于碳中和目标的实现具有重要的意义.因此,C1分子电化学转化的研究成为了当下重点关注的研究领域,许多重要的研究成果和技术进步在过去几年中不断涌现.固态氧化物电解池作为一种代表性的C1分子电解和转化平台,也日渐引起相关领域研究人员的关注和兴趣.与传统的C1分子催化转化方法相比,基于固态氧化物电解池的电解转化技术具有两个重要优点:高能量转换效率与体系抗中毒能力.这两个特性作为体系稳健性的基石,保障了C1分子转化为可再生燃料的反应过程的长期可持续性.本文首先简要回顾了固态氧化物电解池的前沿技术与发展,并从电解池系统分类、反应体系的特征和反应体系发展的前景与挑战这三个方面,简要介绍了近年来基于固态氧化物电解池体系的C1分子电化学转化的代表性工作.CO₂与CH₄作为廉价易得的C1分子的代表,其转化因其反应分子惰性及反应过程不可控性而广受研究者关注,本文重点关注了在固态氧化物电解池中CO₂,CO₂/H₂O和CH₄三个体系的电化学反应过程和近期研究进展,希望可为相关研究人员未来设计更合适的催化剂和构建更优的电解池结构提供有益的参考.本文还针对目前固态氧化物电解池体系在C1分子转化领域所面临的挑战,提出了未来的一些可能的研究方向,以期助力研究者在不远的将来实现C1分子电解生产可再生燃料的实用化.     

A Defective Nanotube Molecule of C552H496N24 with Pyridinic and Pyrrolic Nitrogen Atoms

A 3-nm molecule comprising a cylindrical core and cross-shaped rims was designed and synthesized by developing a modular synthetic route. By using a cyclic precursor from previous studies as a starting material, multiple carbazole units were installed at the rims of the defective cylinder. The defective cylinder was synthetically doped with two types of nitrogen atoms, that is, pyridinic and pyrrolic nitrogen atoms, which resulted in solvatochromic shifts in fluorescence by charge-transfer interactions. The structure of the large, C₅₅₂H₄₉₆N₂₄ molecule was fully disclosed by crystallographic analyses, and the unique helical arrangement of nitrogen-doped cylinders in the crystal was revealed.