A New Activation Method for Electroless Metal Plating：Palladium Laden via Bonding with Self—Assembly Monolayers

A new activation method has been developed for electroless copper plating on silicon wafer based on palladium chemisorption on SAMs of APTS without SnCl2 sensitization and roughening condition.A closely packed electroless copper film with strong adhesion is successfully formed by AFM observation.XPS study indicates that palladium chemisorption occurred via palladium chloride bonding to the pendant amino group of the SAMs.     

Diorganotin(IV) derivatives of substituted benzohydroxamic acids with high antitumor activity

A series of diorganotin(IV) and dichlorotin(IV) derivatives of 4-X-benzohydroxamic acids, [HL(1) (X = Cl) or HL(2) (X = OCH(3))] formulated as [R(2)SnL(2)] (R = Me, Et, nBu, Ph or Cl; L = L(1) or L(2)), along with their corresponding mixed-ligand complexes [R(2)Sn(L(1))(L(2))] have been prepared and characterized by FT-IR, (1)H, (13)C, and (119)Sn NMR spectroscopy, mass spectrometry, elemental analysis, and melting points. In addition, single-crystal X-ray diffraction analyses were carried out for [Me(2)SnL(2)] (L = L(1) or L(2)), which show coordination structures intermediate between distorted octahedra and bicapped tetrahedra. The hydroxamate ligands are asymmetrically coordinated by the oxygen atoms, the carbonyl oxygen atom is further away from the metal center than the other oxygen atom. The complexes are stable monomeric species; most of them are soluble not only in chlorohydrocarbon solvents, but also in alcohols and hydroalcoholic solutions. In polar solvents, the mixed-ligand complexes gradually decompose into the corresponding single-ligand complex couples. The complexes exhibit in vitro antitumor activities (against a series of human tumor cell lines) which, in some cases, are identical to, or even higher than, that of cisplatin. For the dialkyltin complexes, the activity increases with the length of the carbon chain of the alkyl ligand and is higher in the case of the chloro-substituted benzohydroxamato ligand. The [nBu(2)Sn(L(1))(2)] complex displays a high in vivo activity against H22 liver and BGC-823 gastric tumors, and has a relatively low toxicity.     

FTO – an Electrode Material for the Stable Electrochemical Determination of Dopamine

Dopamine and other catecholamines play a keyrole for the interaction of numerous processes in the neuronal network. Hence, numerous detection methods have been developed. Electrochemical sensor developments for catecholamines are characterized mostly by complex modification strategies in order to avoid a disturbance of the sensor signal by interfering substances. Here the application of fluorine doped tin oxide (FTO) as electrode material for dopamine detection is reported avoiding the necessity of expensive modifications and stability problems. This FTO based electrode allows the discrimination between dopamine and its precursor as well as its methylated degradation product and is not disturbed by typical interfering compounds (ascorbic acid, uric acid) and is characterized by high linearity and stability of the sensor signal for repeated measurements.     

Comparison of Bottom-up Filling in Electroless Plating with an Addition of PEG,PPG and EPE

The bottom‐up filling capabilities of electroless copper plating bath with an addition of additives, such as polyethylene glycol (PEG), polypropylene glycol (PPG) and triblock copolymers of PEG and PPG with ethylene oxide terminal blocks termed EPE, were investigated by the cross‐sectional scanning electron microscopy (SEM) observation of sub‐micrometer trenches. Though three additives had inhibition for electroless copper deposition, the suppression degrees of three additives were different. EPE‐2000 had the strongest suppression for electroless copper deposition, and the suppression of PEG‐2000 was the weakest. The bottom‐up filling capability of electroless copper was investigated in a plating bath containing different additives with the concentration of 2.0 mg/L. The cross‐sectional SEM observation indicated the trenches with the width of 280 nm and the depth of 475 nm were all completely filled by the plating bath with an addition of EPE‐2000, but the trenches were not completely filled by the plating bath with an addition of PEG‐2000 or PPG‐2000, and some voids appeared. Linear sweep voltammetry measurement indicated that three additives all inhibited the cathodic reduction reaction and the anodic oxidation reaction, and the inhibition of EPE‐2000 was the strongest among three additives, which agreed with that of the deposition rate of electroless copper. Significant differences in surface roughness of deposited copper film were observed by UV‐visible near‐infrared for different suppressors, and the bright and smooth of deposited copper film were in accordance with the inhibition of three additives.     

真空蒸镀法制备锡薄膜及其嵌锂电化学性能

采用真空蒸镀法在铜片基底上沉积锡薄膜作为锂离子电池负极材料,对所制备的锡薄膜采用扫描电子显微镜、X射线衍射表征,研究了其表面形貌和组成。 将制备的薄膜在手套箱中组装成CR2032型钮扣式电池,进行电化学测试,研究其电化学性能。 实验结果表明,在相同蒸发时间和基底温度的条件下,随着蒸发功率的增加,沉积的锡颗粒逐渐增大,相应的电化学性能降低。 以蒸发功率200 W、基底温度150 ℃制得的样品粒径为100~200 nm,含有Cu6Sn5合金相,以0.2C倍率充放电循环20周后放电容量达527 mA·h/g。     

锌和锡参与下末端环氧化物的选择性烯丙基化反应

烯丙基溴和金属辛或锡成功地将末端环氧化合物1一锅法合成高烯丙基醇2和双高烯丙基醇3. 还研究了环氧化合物取代基的影响, 并提出了此烯丙基化的反应途径 .     

三(2-甲基-2-苯基丙基)锡芳氧乙酸酯的合成

三（２－甲基－２－苯基丙基）锡芳氧乙酸酯的合成刘宝殿,宁志刚,朱东升,包明（东北师范大学化学系,长春,１３００２４）关键词三（２－甲基－２－苯基丙基）锡芳氧乙酸酯,三（２－甲基－２－苯基丙基）氢氧化锡,芳氧乙酸,杀螨活性１９６６年Ｒｅｉｃｈｌｅ［１］...     

Einfache Trithio- und Perthiocarbonatokomplexe mit interessanter Koordinationschemie: [E(CS3)2]2− (E = Sn,Zn, Cd), [E(CS3)3]3− (E = As,Sb, Bi,Co), {Cu(CS3)−}∞ und [Zn(CS4)2]2−

Simple Trithio- and Perthiocarbonato Complexes with Interesting Bond Properties: [E(CS₃)₂]^2? (E = Sn, Zn, Cd), [E(CS₃)₃]^3? (E = As, Sb, Bi, Co), {Cu(CS₃)^?}_∞ and [Zn(CS₄)₂]^2? By reactions of potassium trithiocarbonate ( 1 ) with solutions of zinc(II)- acetylacetonate, cadmium(II)-chloride, tin(II)-chloride, arsenic(III)-sulfide (suspension), antimony(III)-chloride, bismuth(III)-chloride and copper(II)-chloride in dimethyl sulfoxide, as well as of trisodium hexanitrito cobaltate(III) in water, and the precipitation of the complexes with an aqueous solution of tetraphenylphosphonium chloride the compounds (PPh₄)₂[Zn(CS₃)₂] ( 2 ), (PPh₄)₂[Cd(CS₃)₂] ( 3 ), (PPh₄)₂[Sn(CS₃)₂] ( 4 ), (PPh₄)₃[As(CS₃)₃] ( 5 ), (PPh₄)₃[Sb(CS₃)₃] ( 6 ), (PPh₄)₃[Bi(CS₃)₃] ( 7 ), (PPh₄)₃[Co(CS₃)₃] ( 8 ) and (PPh₄)Cu(CS₃) ( 9 ) have been isolated. (PPh₄)₂[Zn(CS₄)₂] · CH₃NO₂ ( 10 ) has been prepared by heating a solution of 2 in nitromethane to 60--70°C in presence of air. The reaction of 1 in dimethyl sulfoxide with an aqueous tetraphenylphosphonium chloride solution in presence of oxygen leads to (PPh₄)₂[C₂S₆] ( 11 ). The compounds have been characterized by spectroscopical studies (IR, Raman, UV/Vis, ¹¹³Cd/⁵⁹Co-NMR), magnetic susceptibility measurements, powder diffractometry, elemental analyses and single crystal X-ray structure analysis ( 4 – 7 , 10 and 11 ). The difficult growing of single crystals has been reported in detail. For crystal data see Inhaltsübersicht.     

Selective separation of trace nickel(II) and gold(I) ions via hollow fiber supported liquid membrane enhanced by synergistic extractants D2EHPA/TBP

This work presents the selective and simultaneous separation of nickel (Ni²⁺) and gold ([Au(CN)₂]⁻) ions, in trace amounts, from alkaline solution via hollow fiber supported liquid membrane (HFSLM) technique. HFSLM is challengingly carried out in real rinse wastewater generated by the ENIG plating process. The influence of various chemical parameters, including the type of extractant and their concentrations, molar ratios of mixed extractant as well as type of strippant, are also studied. The organophosphorus extractant mixtures of D2EHPA and TBP provide a synergistic effect for target Ni²⁺ ions but has an antagonistic effect as regards the extraction of non-target [Au(CN)₂]⁻ ions. Compared to other inorganic acids, HCl is seen to be the most suitable strippant for the selective stripping. Results demonstrate that percentages of extraction and stripping of Ni²⁺ ions achieved 85.7 and 83.2%, respectively. In contrast, percentages of extraction and stripping of non-target [Au(CN)₂]⁻ ions attained 15.6 and 1.94%.