聚合温度对聚甲基丙烯酸三丁基锡酯等规度的影响(Ⅰ)

本文测定了0—130℃温度范围内,由~(60)Co-γ射线和两种活性不同的引发剂引发聚合的聚甲基丙烯酸三丁基锡酯的等规度。利用~(13)C-NMR测定聚合物分子链的等规度,如预料的那样,以间同立构为主,并随着聚合温度的升高间同立构等规度降低。作者认为影响聚合物等规度的因素主要是取代基的极性效应。计算出的控制等规度的活化能参数与聚甲基丙烯酸甲酯和聚甲基丙烯酸三甲基锡酯的属同一数量级,可相互比较。     

Tin Mediated Allylation of Aldimines with Allyl Bromide

SyntheticinterestsinhighlyfunctionalizedacyclicandcyclicamineshavecontributedtothewealthofexPerimentalmethodologydeveloPedfortheadditionofcarbanionstothecarbon-nitrogendoublebondofimines.Generally,organometallicreagentsorilltermedi-atesareusedascarbanionsandadditionofallylicorganometallicspeciestothenieconshtutesavaluablemethodforthesynthesisofhomoallylamines.'Amongthese,allyLlithium,'-magnesium,'-zinc,'-boraneandboronate,'-silaneand-stannane'havebeenusedforallylationofdriines.Ontheotherhand,…     

铟锡氧化物(ITO)纳米颗粒的制备及表征

以金属In和SnCl₄·5H₂O为主要原料，加入保护剂PVP，利用化学共沉淀法合成了球形的铟锡氧化物(ITO)纳米颗粒。分别对PVP的用量、溶液的pH值、热处理温度等因素对ITO纳米颗粒粒径的影响进行了分析。并且借助透射电镜(TEM)、X射线衍射(XRD)对所合成的ITO纳米颗粒进行了表征。XRD分析说明本文合成了金刚砂型结构的铟锡氧化物纳米颗粒，并且其晶型结构随着热处理温度的升高而转变为铁锰矿型。     

Intramolecular hydrogen bonds and conformations of the 1,4-butanediol molecule

IR and Raman spectra of 1,4-butanediol (BD) versus variations in the medium (CCl₄, CH₃CN), concentration, temperature, and phase state were obtained. The observed changes attest to the conformational variety of BD molecules under the experimental conditions. On the basis of the analysis of the v(OH) region it is concluded that both in the gas phase and in CCl₄ solution conformers of BD with free OH groups coexist with conformers with O-H...O intramolecular hydrogen bonds. The difference in enthalpies, H, for the groups of conformers with and without intramolecular hydrogen bonds was found from the temperature dependence of the v(OH)_free and v(OH)_intra band intensities. The structures and energies for 70 possible spectrally and energetically distinguishable conformers of BD that do not take into account intramolecular hydrogen bonds were calculated by molecular mechanics with account of electron lone pairs of oxygen atoms. Using the experimental values of H and the calculated relative conformer energies,E, the intramolecular hydrogen bond energyE _intra= 3.7 kcal mol^–1 was found.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1572–1577, September, 1993.     

The structural phase transitions of aminoguanidinium(1+) dihydrogen phosphate—study of crystal structures, vibrational spectra and thermal behavior

Aminoguanidinium(1+) dihydrogen phosphate was prepared by crystallization from aqueous solution. On the basis of the results of DSC measurements, X-ray structural analysis was carried out at temperatures of 160, 215 and 293 K for three aminoguanidinium(1+) dihydrogen phosphate phases ( |Z=2|non-ferroic |melting point 408 K; II |201-222 K|(2) |Z=2|non-ferroic|-; III |<201 K|(2)|Z=4|non-ferroic|-). The triclinic unit cell dimensions (a=6.8220(2), b=7.1000(2), c=7.4500(2) Å, α=86.925(2)°, β=80.731(2)°, γ=79.630(2)°, V=350.21(2) Å³—phase I) are similar for all three structural phases with the exception of phase III, where doubling of the c-axis length leads to an increase in the volume to 692.34(3) Å³. The crystal structure of all three modifications consists of parallel layers of dihydrogen phosphate anions that are interconnected by aminoguanidinium(1+) cations through hydrogen bonds of the N-H…O type. The planar aminoguanidinium(1+) cations are oriented almost parallel to each other and are perpendicular to the anion layers. The primary differences amongst phases I, II and III lie in the location of the H atom in the short O-H…O bonds connecting the dihydrogen phosphate anions in layers. The FTIR and FT Raman spectra of natural and deuterated compounds were recorded and interpreted. The FTIR spectra were studied down to a temperature of 90 K.     

Synthese der Stannatetraphospholane (tBuP)4SnR2 (R = tBu,nBu, C6H5) und (tBuP)4Sn(Cl)nBu Molekül- und Kristallstruktur von (tBuP)4Sn(tBu)2

Synthesis of the Stannatetraphospholanes (tBuP)₄SnR₂ (R = tBu, nBu, C₆H₅) and (tBuP)₄Sn(Cl)nBu Molecular and Crystal Structure of (tBuP)₄Sn(tBu)₂ The reaction of the diphosphide K₂[tBuP-(tBuP)₂-PtBu] 4 with the halogenostannanes (tBu)₂SnCl₂, (nBu)₂SnCl₂, (C₆H₅)₂SnCl₂ or nBuSnCl₃ in a molar ratio of 1 : 1 leads via a [4 + 1]-cyclocondensation reaction to the stannatetraphospholanes (tBuP)₄SnR₂ 3 b–3 d and (tBuP)₄Sn(Cl)nBu 3 e , respectively, with the binary 5-membered P₄Sn ring system. 3 b was characterized by a single crystal structure analysis; the 5-membered ring exists in a planar conformation. The compounds 3 b–3 e were identified by NMR and also by mass spectroscopy; the ³¹P{¹H}-NMR spectra of 3 b–3 d showed an AA′MM′ (AA′MM′X), 3 e on the other hand an ABCD (ABCDX) spin system.     

Nature of the active center in the cyclotrimerization of isocyanates catalyzed by the tertiary amine—α-oxide—protondonor system

The structure of the dimethylbenzylamine (DMBA)—phenylglyc idyl ether (PGE)—phenol complex was studied by IR and¹H NMR spectroscopy under various conditions of its formation. The active catalyst in the cyclotrimerization of isocyanates is a complex of composition DMBA : PGE : PhOH = 1 : 1 : 2, in which the oxygen atom of the zwitter-ion PhCH₂N⁺Me₂CH₂CH(O^–)CH₂OPh that forms after opening, of the epoxide cycle is bound to two phenol molecules by a very strong hydrogen bonds. In this complex, the oxygen atom of both the zwitter-ion and the phenolate anion can be catalytic centers. Two schemes of the cyclotrimerization of isocyanate in the presence of the aforementioned catalytic system are suggested, depending on whether the catalytic complex has time to form or not.For Part I, see Ref. 1.Deceased.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1662–1668, July, 1996.     

四甲基锡在MCM-41分子筛表面的接枝反应及产物性能

研究了真空条件下SnMe4在MCM-41分子筛表面的接枝反应，并用元素分析、ICP、GC-MS、XRD、FTIR、DRS、13C及119Sn MAS NMR、XPS、BET、TPD、TPR等方法对产物的组成、结构和性质进行了表征.结果表明, 两者可以定量地进行化学反应，将确定数目的甲基锡基团接枝在分子筛表面, 形成SnMe3/MCM-41物种；接枝反应发生在分子筛表面上, 不破坏MCM-41分子筛骨架结构；改性分子筛的BET比表面积有所降低，孔体积变小, 表面性质发生变化.四甲基锡在MCM-41上接枝反应的温度为343 K,比它与HY沸石的反应温度(193 K)高得多，并且产物SnMe3/MCM-41的热稳定性也高于SnMe3/HY.     

A Combined Experimental and Theoretical Electron Density Study of Intra‐ and Intermolecular Interactions in Thiourea S,S‐Dioxide

The thiourea S,S‐dioxide molecule is recognized as a zwitterion with a high dipole moment and an unusually long C? S bond. The molecule has a most interesting set of intermolecular interactions in the crystalline state—a relatively strong O???H? N hydrogen bond and very weak intermolecular C???S and N???O interactions. The molecule has C_s symmetry, and each oxygen atom is hydrogen‐bonded to two hydrogen atoms with O???H? N distances of 2.837 and 2.826 Å and angles of 176.61 and 158.38°. The electron density distribution is obtained both from Xray diffraction data at 110 K and from a periodic density functional theory (DFT) calculation. Bond characterization is made in terms of the analysis of topological properties. The covalent characters of the C? N, N? H, C? S, and S? O bonds are apparent, and the agreement on the topological properties between experiment and theory is adequate. The features of the Laplacian distributions, bond paths, and atomic domains are comparable. In a systematic approach, DFT calculations are performed based on a monomer, a dimer, a heptamer, and a crystal to see the effect on the electron density distribution due to the intermolecular interactions. The dipole moment of the molecule is enhanced in the solid state. The typical values of ρ_b and H_b of the hydrogen bonds and weak intermolecular C???S and N???O interactions are given. All the interactions are verified by the location of the bond critical point and its associated topological properties. The isovalue surface of Laplacian charge density and the detailed atomic graph around each atomic site reveal the shape of the valence‐shell charge concentration and provide a reasonable interpretation of the bonding of each atom.     

Polyurethane anionomers synthesised with aromatic, aliphatic or cycloaliphatic diisocyanates, polyoxyethylene glycol and 2,2-bis-(hydroxymethyl)propionic acid. Part II. Supermolecular structure. Thermal properties

Small angle X-ray scattering and differential scanning calorimetry methods were employed to characterise the internal order of structural phases present in polyurethane coatings obtained as a result of water evaporation from anionomer dispersions. Those anionomers were produced in the reaction of aromatic, cycloaliphatic and aliphatic diisocyanates with polyoxyethylene glycol, 2,2-bis-(hydroxymethyl)propionic acid and 1,6-hexamethylenediamine. The decisive effects were found from ionic and polar structures within the rigid urethane and urea segments on the ordered arrangement degree of the supermolecular structures in the obtained anionomers. That becomes apparent in differential scanning calorimetry thermograms and contributes to improved thermal stability of the produced polyurethane coatings.