Separation of Xylene Isomers in the Anion-Pillared Square Grid Material SIFSIX-1-Cu

Xylene isomer separation is considered one of the seven separation challenges that changed the world. In addition, the high-energy demand of xylene separation highlights the need for efficient novel adsorbents. Herein, the liquid-phase separation potential of the anion-pillared hybrid material SIFSIX-1-Cu was studied for preferential adsorption of o-xylene and m-xylene over p-xylene, which was inspired by a previous complexation crystallization method for separating m-xylene. We report detailed experimental liquid-phase adsorption experiments, yielding selectivities of 3.0 for o-xylene versus p-xylene and 2.6 for m-xylene versus p-xylene. Our theoretical calculations thus provide a reasonable explanation that the xylene adsorption selectivity is attributed to the C−H⋅⋅⋅F interaction, and the host–guest interaction order agrees with the adsorption priority: o-xylene > m-xylene > p-xylene.     

Designed Construction of SrTiO3/SrSO4/Pt Heterojunctions with Boosted Photocatalytic H2 Evolution Activity

Efficient separation of photogenerated electron–hole pairs is a crucial factor for high-performance photocatalysts. Effective electron–hole separation and migration could be achieved by heterojunctions with suitable band structures. Herein, a porous SrTiO₃/SrSO₄ heterojunction is prepared by a sol-gel method at room temperature followed by an annealing process. XRD characterization suggests high crystallinity of the heterostructure. A well-defined interface between the two phases is confirmed by high-resolution (HR)TEM. The photocatalytic H₂ evolution productivity of the SrTiO₃/SrSO₄ heterojunction with Pt as co-catalyst reaches 396.82 μmol g⁻¹ h⁻¹, which is 16 times higher than that of SrTiO₃/Pt. The boosted photocatalytic activity of SrTiO₃/SrSO₄/Pt can be ascribed to the presence of SrSO₄, which promotes the transfer and migration of photogenerated carriers by forming the heterojunction and porous structure, which provides a large amount of active sites. This novel porous heterostructure brings new ideas for the development of high-efficiency photocatalysts for H₂ release.     

Filling the Charge–Discharge Voltage Gap in Flexible Hybrid Zinc-Based Batteries by Utilizing a Pseudocapacitive Material

The high charge–discharge voltage gap is one of the main bottlenecks of zinc–air batteries (ZABs) because of the kinetically sluggish oxygen reduction/evolution reactions (ORR/OER) on the oxygen electrode side. Thus, an efficient bifunctional catalyst for ORR and OER is highly desired. Herein, honeycomb-like MnCo₂O_4.5 spheres were used as an efficient bifunctional electrocatalyst. It was demonstrated that both ORR and OER catalytic activity are promoted by Mn^IV-induced oxygen vacancy defects and multiple active sites. Importantly, the multivalent ions present in the material and its defect structure endow stable pseudocapacitance within the inactive region of ORR and OER; as a result, a low charge–discharge voltage gap (0.43 V at 10 mA cm⁻²) was achieved when it was employed in a flexible hybrid Zn-based battery. This mechanism provides unprecedented and valuable insights for the development of next-generation metal–air batteries.     

Metal-Organic Frameworks with Novel Catenane-like Interlocking: Metal-Determined Photoresponse and Uranyl Sensing

The assembly of two tripyridinium-tricarboxylate ligands and different metal ions leads to seven isostructural MOFs, which show novel 2D→2D supramolecular entanglement featuring catenane-like interlocking of tricyclic cages. The MOFs show tripyridinium-afforded and metal-modulated photoresponsive properties. The MOFs with d¹⁰ metal centers ( 1-Cd , 1-Zn , 2-Cd , 2-Zn ) show fast and reversible photochromism and concomitant fluorescence quenching, 1-Ni displays slower photochromism but does not fluoresce, and 1-Co and 2-Co are neither photochromic nor fluorescent. It is shown here that the network entanglement dictates donor-acceptor close contacts, which enable fluorescence originated from interligand charge transfer. The contacts also allow photoinduced electron transfer, which underlies photochromism and concomitant fluorescence response. The metal dependence in fluorescence and photochromism can be related to energy transfer through metal-centered d-d transitions. In addition, 1-Cd is demonstrated to be a potential fluorescence sensor for sensitive and selective detection of UO₂²⁺ in water.     

Partial Hydrolysis of Cyanide Coordination Polymers Induced by a Pillar Ligand with Optimized Electrochemical Kinetics for Rechargeable Alkaline Batteries

Coordination polymers are promising cathode materials for rechargeable alkaline batteries. Therefore, the precise modulation of these cathodes by chemical structure and in-depth structure transform study is necessary. Here, two model coordination polymer battery cathodes were designed to demonstrate the dynamic structure–performance relationship. We studied the electrochemical performance of two kinds of nickel-based coordination polymer, comprising a planar 2D cyanide-bridged network and a 3D cyanide-bridged network pillared by pyrazine molecules. The 2D coordination polymer showed serious voltage degradation with poor rate capability, whereas the 3D coordination polymer exhibited stable voltage output coupled with high rate at various current densities. The investigation revealed the underlining relationship of plateau voltage degradation and hydrolysis process of electrodes. It was revealed that the pyrazine pillar molecules in the 3D coordination polymer could suppress the hydrolysis and lead to the in situ formation of partially hydrolyzed structure with excellent electrochemical kinetics; this exhibited obvious smaller peak separation (27 mV compared with 149 mV) and hence an almost twofold increase in capacity retention (31.9 to 50.0 %) and energy density retention (18.2 to 35.9 %) at 10 A g⁻¹.     

Cyclodimers and Cyclotrimers of 2,3 -Bisalkynylated Anthracenes,Phenazines and Diazatetracenes

The synthesis of novel (N−)acene-based cyclooligomers is reported. Glaser-Hay coupling of the bisethynylated monomers results in cyclodimers and cyclotrimers that are separable by column and gel-permeation chromatographies. For the diazatetracene, the use of sec-butyl-silylethynyl groups is necessary to achieve solubility. Diazatetracene-based cyclodimers and cyclotrimers were used as semiconductors in thin-film transistors. Although their optoelectronic properties are quite similar, their electron mobilities in proof-of-concept thin-film transistors differ by an order of magnitude.     

Efficient production of nanoporous silicon carbide from rice husk at relatively low temperature

Nanoporous silicon carbide with a specific surface area of up to 186.45 m² g⁻¹ has been efficiently synthesized from waste rice husk using a magnesiothermic reduction at 950 °C as a key step. Throughout the entire process, the recovery rates of silicon, potassium and phosphorus from rice husk can reach 88.46, 91.5 and 65.5%, respectively. Turning rice husk waste into a real treasure, this promising method for producing porous SiC protects the environment and brings economic benefits.     

New synthetic corticosteroids inhibit Epstein–Barr virus release

Novel spiroandrostene-17,6'-[1,3,4]thiadiazines obtained by synthesis from 16β,17β-epoxy-17-isopregn-5-en-3β-ol-20-one and N-aryl-2-hydrazino-2-thioxoacetamide efficiently inhibited the release of Epstein–Barr virus from cells carrying the virus in culture. Other studied steroids, such as Spirolactone, Digitonin, Diosgenin, and Hecogenin were inactive. DMSO alone was found to inhibit the virus release, as well, likely, because of changing properties of the cell membranes. The novel steroids, Spironolactone and most analogues display no or low cell toxicity while Digitonin produced a significant toxic effect.     

Easy size control of polymer nanoparticles obtained by emulsification–evaporation technique in a microfluidic reactor

The production of polymer nanoparticles with a narrow size distribution on standard T- and X-configuration microfluidic chips with a channel size of 100 μm has been achieved. Introducing ethanol into the aqueous phase in 1:9 ratio (v/v) allowed one to reduce the surface tension of the contacting phases and obtain nanoparticles in the range of 100–150 nm. This makes our approach promising for development of nanoscale drug delivery systems.     

Determining binding constants for 1:1 and 1:2 inclusion complexes of ester betulin derivatives with (2-hydroxypropyl)-β-cyclodextrin by affinity capillary electrophoresis

The complexation of ester betulin derivatives with (2-hydroxypropyl)-β-cyclodextrin (HP-β-CD) was studied by mobility shift affinity CE. Electrophoretic mobility for triangular peaks was calculated using the parameter a₁ of the Haarhoff–Van der Linde function instead of the peak top time. Dependences of the viscosity corrected electrophoretic mobility on HP-β-CD concentration were not described on the basis of only complexes with 1:1 stoichiometry due to the fact that these binding curves did not reach a plateau. However, the dependences were well described taking into account both 1:1 and 1:2 complexes. The presence of higher order equilibria was also revealed by x-reciprocal plots. The values of apparent binding constant logarithm, obtained for the first time, for 1:1 and 1:2 HP-β-CD complexes of betulin 3,28-diphthalate and betulin 3,28-disuccinate with 95% confidence interval limits in brackets are the same within error and are equal to 4.85 (4.73–4.95), 8.56 (7.75–8.82), 4.92 (4.86–4.97), and 8.54 (8.23–8.72) at 25°C, respectively. These values for 1:1 and 1:2 HP-β-CD complexes of betulin 3,28-disulfate at 25°C are 4.61 (4.57–4.64) and 7.11 (6.57–7.34), respectively. The binding constants for betulin 3,28-disulfate agree with the previously obtained results from the separation in the thermostatted capillary segment.