Cooperative spectrum sharing MIMO systems with successive decoding

A spectrum sharing system with primary and secondary nodes, each equipped with an arbitrary number of antennas, is investigated. Particularly, the outage performance of an underlay cognitive system is analytically studied, in the case when the end-to-end ($e2e$) communication is established via an intermediate relay node. To better enhance the $e2e$ communication, successive interference cancellation (SIC) is adopted, which compensates for both the transmission power constraint and the presence of interference from primary nodes. Both the relay and secondary receiver perform unordered SIC to successively decode the multiple streams, whereas the decode-and-forward relaying protocol is used for the $e2e$ communication. New closed-form expressions for the $e2e$ outage performance of each transmitted stream are derived in terms of finite sum series of the Tricomi confluent hypergeometric function. In addition, simplified yet tight approximations for the asymptotic outage performance are obtained. Useful engineering insights are manifested, such as the diversity order of the considered system and the impact of interference from the primary nodes in conjunction with the constrained transmission power of the secondary nodes.     

Solitons and conservation laws in magneto–optic waveguides having parabolic–nonlocal law of refractive index

This paper reveals soliton solutions to magneto–optic waveguides that maintain parabolic–nonlocal law of refractive index. The unified Riccati equation expansion together with extended auxiliary equation approach together reveal bright, dark, singular as well as straddled optical solitons. These soliton solutions are obtained through a limiting process when the modulus of ellipticity approaches unity. Finally, the conservation laws are also listed.     

Microstructure evolution of room-temperature-sputtered ITO films suitable for silicon heterojunction solar cells

Thickness influence on structural, optical and electrical properties of sputtered indium tin oxide (ITO) with thickness ranging from 60 up to 430 nm films has been studied. At the increase of the film thickness crystallinity degree and grain size increased, whereas tensile structural distortion as well as resistivity decreased. It was observed that a microstructure evolution takes place: the initial amorphous layer evolved in polycrystalline phase, with a grain–subgrain surface morphology. Carrier concentration increased at the increase of the film thickness and a general relationship between electrical characteristics and structural distortion has been found. In thinner films larger tensile distortion allowed to include larger amount of interstitial O and/or Sn atoms in the lattice. An appreciable impact of the thickness was also observed on electro-optical properties in terms of changes in energy gap, resistivity and optical absorption. Silicon heterojunction solar cells have been produced and J_sc as high as 33.0 mA/cm² has been obtained.     

Sonication enhances the stability of MnO2 nanoparticles on silk film template for enzyme mimic application

We have developed an in-situ method using sonication (3 mm probe sonicator, 30 W, 20 kHz) and auto-reduction (control) to study the mechanism of the formation of manganese dioxide (MnO₂) on a solid template (silk film), and its resulting enzymatic activity on tetramethylbenzidine (TMB) substrate. The fabrication of the silk film was first optimized for stability (no degradation) and optical transparency. A factorial approach was used to assess the effect of sonication time and the initial concentration of potassium permanganate (KMnO₄). The result indicated a significant correlation with a fraction of KMnO₄ consumed and MnO₂ formation. Further, we found that the optimal process conditions to obtain a stable silk film with highly catalytic MnO₂ nanoparticles (NPs) was 30 min of sonication in the presence of 0.5 mM of KMnO₄ at a temperature of 20–24 °C. Under the optimal condition, we monitored in-situ the formation of MnO₂ on the silk film, and after thorough rinsing, the in-situ catalysis of 0.8 mM of TMB substrate. For control, we used the auto-reduction of KMnO₄ onto the silk film after about 16 h. The result from single-wavelength analysis confirmed the different kinetics rates for the formation of MnO₂ via sonication and auto-reduction. The result from the multivariate component analysis indicated a three components route for sonication and auto-reduction to form MnO₂-Silk. Overall, we found that the smaller size, more mono-dispersed, and deeper buried MnO₂ NPs in silk film prepared by sonication, conferred a higher catalytic activity and stability to the hybrid material.     

First-principles investigation on ideal strength of B2 NiAl and NiTi alloys

For B2 NiAl and NiTi intermetallic compounds, the ideal stress–strain image is lack from the perspective of elastic constants. We use first-principles calculation to investigate the ideal strength and elastic behavior under the tensile and shear loads. The relation between the ideal strength and elastic constants is found. The uniaxial tension of NiAl and NiTi along <001> crystal direction leads to the change from tetragonal path to orthogonal path, which is driven by the vanishing of the shear constant C(66). The shear failure under {110}{111} shear deformation occurring in process of tension may result in a small ideal tensile strength(~ 2 GPa) for NiTi. The unlikeness in the ideal strength of Ni Al and Ni Ti alloys is discussed based on the charge density difference.     

The structural and catalytic properties of nanoparticles@MOF composites: A case study of Au@ZIF-8 hybrid crystals

Strain analysis of the MOF and its composites using high-resolution X-ray diffractionmeter (XRD) was carried out and the presence of non-uniform, depth-related strain in the MOF crystals was confirmed. Further analysis showed that the magnitude and distribution of strain in MOF crystals can be tuned with the incorporation of nanoparticles (NPs). Moreover, the spatial controlled structures can also optimize functionalities of the NPs@MOF, which was exemplified by their applications on the catalytic reduction of nitroarenes. It is anticipated that the investigation of MOF structure evolution through controlling the architectures of the MOF/NPs hybrid materials will shed a light on the study of optimizing the mechanical and chemical properties of MOF composites.     

The Ising version of the t–J model

The t–J model is analysed in the limit of strong anisotropy, where the transverse components of electron spin are neglected. We propose a slave-particle-type approach that is valid, in contradiction to many of the standard approaches, in the low-doping regime and becomes exact for a half-filled system. We describe an effective method that allows to numerically study the system with the no-double-occupancy constraint rigorously taken into account at each lattice site. Then, we use this approach to demonstrate the destruction of the antiferromagnetic order by increasing the doping and formation of Nagaoka polarons in the strong interaction regime.     

An analysis of the simulated acoustic emission sources with different propagation distances,types and depths for rail defect detection

Acoustic Emission (AE) technique is an effective nondestructive detecting method, and has a promising application for rail defect detection. So far, little attention has been paid to propagation distances, types, and depths of AE sources, which are important for rail defect detection accurately. This paper presents an experimental study on the simulated AE sources with different propagation distances, types and depths for rail defect detection. Three simulated AE sources with different frequencies are seeded on the cross section of rail, and the depths of AE sources are changed in the vertical direction. After receiving AE signals, wavelet transform and Rayleigh–Lamb equations are utilized to extract time–frequency features and modes. Based on the wavelet transform with corresponding group-velocity curves, the influences of different propagation distances, the features of different source types and the rules of different source depths are examined. It is concluded that the features of AE sources with different propagation distances, types and depths can be obtained by AE technique for rail defect detection. It is very useful to analyze and detect defects in rail defect detection.     

Band bending at the conducting polymer/indium tin oxide interfaces with and without ultraviolet treatment

In this study, the effect of ultraviolet treatment on the band bending at the poly(3,4-ethylenedioxythiophene) doped with poly(4-styrenesulfonate)/indium tin oxide (PEDOT:PSS/ITO) interfaces were researched. The authors suggested that ultraviolet treatment could lead to a reduction in the band bending at the PEDOT:PSS/ITO interface, owing to the removal of carbon contamination at the ITO surfaces and a decrease in the number of the trap-states at the PEDOT:PSS/ITO interface.