Influence of promoters on the performance of Au/MnOx and Pt/SnOx/SiO2 low-temperature CO oxidation catalysts

The influence of promoters on Pt/SnO_x/SiO₂ and Au/MnO_x low-temperature CO oxidation catalysts has been investigated under stoichiometric reaction conditions with no CO₂ added to the feed gas. The performance of Pt/SnO_x/SiO₂ catalysts is improved significantly by the addition of 1 wt.% Fe but reduced by the addition of 5 wt.%Fe, 1 wt.% Sb, 5 wt.% Sb, 1 wt.% As, 5 wt.%As and 1.8 wt.% P. The performance of Au/MnO_x is improved significantly by the addition of 1 at.% Ce but reduced by the addition of 1 at.% Co. For the catalysts and conditions examined, the Au/MnO_x catalysts are superior to the Pt/SnO_x/SiO₂ catalysts with respect to both activity and decay characteristics.     

Investigation of surface structure and composition of in situ annealed Fe–Mn binary alloy samples using RHEED and electron spectroscopy

The formation of oxides at the surface of Fe–1.5%Mn and Fe–0.6%Mn binary alloys was investigated as a function of the conditions of the heat treatments. Both the influence of temperature and the atmosphere under which the experiments were performed were studied. The range of annealing temperatures was adjusted to 800°C. The atmosphere consisted of a mixture of N₂–5%H₂ and traces of water vapour, with different fixed dew points ranging from −10°C to −30°C. The state of the annealed surfaces was determined using in situ analytical devices attached to the annealing reactor in order to avoid surface contamination or the formation of native oxides after the experiments due to contact with air. The structure and composition of the surfaces were determined by reflection high-energy electron diffraction (RHEED) and electron spectroscopy (XPS, AES). Copyright © 2002 John Wiley & Sons, Ltd.     

二氧化碳促进的醛和酮等羰基化合物烯丙基化反应研究

加入二氧化碳可以促进羰基化合物的烯丙基化反应. 实验结果表明: 在1.0 MPa的二氧化碳和2 equiv.的锡存在下, 以THF/H₂O为反应介质, 芳香醛化合物与烯丙基溴可以顺利地发生烯丙基化反应得到较高的产率, 而芳香酮化合物和脂肪醛等与烯丙基溴反应只得到较低的产率.     

Structure and Phase Transitions of SnP2O7

SnP₂O₇ is a member of the ZrP₂O₇ family of materials, several of which show unusual thermal expansion behavior over certain temperature ranges and which show a number of displacive phase transitions on cooling from high temperature. Here we describe the structural properties of SnP₂O₇ from 100 to 1243 K as determined by X-ray and neutron powder diffraction. These studies reveal that SnP₂O₇ shows two phase transitions in this temperature range. At room temperature the material has a pseudo-cubic 3×3×3× superstructure. Electron diffraction studies show that the symmetry of this structure is P2₁3 or lower. On warming to ∼560 K it undergoes a phase transition to a structure in which the subcell reflections show a triclinic distortion; above 830 K the subcell reflections show a rhombohedral distortion. Significant hysteresis in cell parameters is observed between heating and cooling. The structure of SnP₂O₇ is discussed with references to other members of the AM₂O₇ family of materials.     

Quantitative determination of sotolon, maltol and free furaneol in wine by solid-phase extraction and gas chromatography-ion-trap mass spectrometry

A method for the analytical determination of sotolon [4,5-dimethyl-3-hydroxy-2(5H)-furanone], maltol [3-hydroxy-2-methyl-4H-pyran-4-one] and free furaneol [2,5-dimethyl-4-hydroxy-3(2H)-furanone] in wine has been developed. The analytes are extracted from 50 ml of wine in a solid-phase extraction cartridge filled with 800 mg of LiChrolut EN resins. Interferences are removed with 15 ml of a pentane-dichloromethane (20:1) solution, and analytes are recovered with 6 ml of dichloromethane. The extract is concentrated up to 0.1 ml and analyzed by GC-ion trap MS. Maltol and sotolon were determined by selected ion storage of ions in the m/z ranges 120-153 and 79-95, using the ions m/z 126 and 83 for quantitation, respectively. Furaneol was determined by non-resonant fragmentation of the m/z 128 mother ion and subsequent analysis of the m/z 81 ion. The detection limits of the method are in all cases between 0.5 and 1 microg l(-1), well below the olfactory thresholds of the compounds. The precision of the method is in the 4-5% range for levels in wine around 20 microg l(-1). Linearity holds at least up to 400 microg l(-1), and is satisfactory in all cases. The recoveries of maltol and sotolon are constant (70 and 64%, respectively) and do not depend on the type of wine. On the contrary, in the case of furaneol, red wines show constant and high recoveries (97%), while the recoveries on white wines range between 30 and 80%. Different experiments showed that this behavior is probably due to the existence of complexes formed between furaneol and sulphur dioxide or catechols. Sensory experiments confirmed that the complexed forms found in white wines are not perceived by orthonasal olfaction, and that the furaneol determined by the method can be considered as the free and odor-active fraction.     

Fluoropolyethers end‐capped by polar functional groups. IV. A novel approach to the evaluation of reactivities of hydroxy‐terminated ethoxylated fluoropolyethers in the tin(IV)‐catalyzed reactions with isophorone diisocyanate

The effect of catalyst dibutyltin dilaurate (DBTDL) on the kinetics of urethane formation reactions of α,ω‐bis(hydroxy)‐terminated fluoropolyethers Fomblin® Z‐DOL TXs (FPEs) of various molecular weights and poly(oxyethylene) glycol PEG‐400 with isophorone diisocyanate (IPDI) in hexafluoroxylene (HFX) and tetrahydrofuran (THF) at 40 °C and NCO:OH = 2:1 have been studied in a broad range of catalyst (0.10–9.00) ×10^?4 M and total reagents (10.0–60.1 wt %) concentrations. The rate of tin‐catalyzed second‐order reactions (with respect to diol and diisocyanate) was found to be proportional to the square root of catalyst concentration [DBTDL]^0.5 both in low polar (HFX) and polar (THF) solvents. Effect of catalyst saturation was revealed for all the reaction systems at higher DBTDL concentrations as well as the appearance of the limiting catalyst concentrations C_lim below which the rates of reaction were close to zero. Based on these findings new effective rate coefficients have been derived k = k_cat/(C ? C) that are independent of the total reagent concentration in the range of 10.0–60.1 wt % ([OH] = 0.10–0.91 equiv/L). This new approach highlights that the rate of the tin‐catalyzed urethane formation reactions of α,ω‐bis(hydroxy)‐terminated fluoropolyethers Z‐DOL TXs with IPDI in HFX at 40 °C and NCO:OH = 2:1 increases significantly with increasing MW of FPE from 776 up to 3405. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5354–5371, 2004     

Nonlinear Current-Voltage Curves for Thin-Film Gas-Sensitive Structures

Current-voltage curves for sensor structures based on thin tin oxide films are examined in various gases. Conditions favoring symmetrical nonlinear curves in the voltage range −30 to 30 V are found.__________Translated from Elektrokhimiya, Vol. 41, No. 6, 2005, pp. 735–737.Original Russian Text Copyright © 2005 by Simakov.Published on the basis of a report delivered at the VII Meeting on Fundamental Problems in Solid-State Ionics (Chernogolovka-2004).     

Etude du Systeme Ternaire Se-Te-Sn

This work is a part of the systematic study of the ternary based chalcogenides systems. The aim is to determine the phase equilibrium, and to determine the limits of the phase area. This is done in view to perfecting knowledge of elaboration conditions for new materials and to study of their physical properties. Few works have been devoted to the study of the ternary system Se-Te-Sn, only the cross section SnSe-SnTe has been studied [1] and [2]. The experimental study by DTA, DSC and X-ray diffraction on powder performed at room temperature, exhibits a miscibility gap in the liquid state which narrows as it goes through the Sn-Se binary system. Three cross sections behave as ‘quasi-binary‘ system and six ternary invariants have been exhibited: three ternary eutectics and three ternary quasi-peritectics. This revised version was published online in July 2006 with corrections to the Cover Date.     

Cationic copolymerization of indene with styrene derivatives: Synthesis of random copolymers of indene with high molecular weight

Random copolymers with high molecular weights of indene and p‐methylstyrene (pMeSt) were synthesized by cationic polymerization with trichloroacetic acid/tin tetrachloride in CH₂Cl₂ at low temperatures. When indene and pMeSt (1:1 v/v), for example, were polymerized at ?40 °C, both monomers were consumed at very similar rates to give a copolymer with high molecular weight [number‐average molecular weight (M_n): 8–9 × 10⁴]. This is indeed quite unexpected behavior for the combination of these two monomers because pMeSt polymerized over 1000 times faster than indene in the homopolymerization under the reaction conditions previously described. The product copolymer of indene and pMeSt had a random monomer sequence in it that was confirmed by NMR analyses and thermal‐property measurements. In sharp contrast with pMeSt, styrene and p‐chlorostyrene, which have no electron‐donating groups on the phenyl ring, led to low molecular weight polymers (M_n < 10,000) in the copolymerization with indene (1:1 v/v). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2449–2457, 2002