Investigation of fill factor losses on 20.2% efficient n‐type mono‐like silicon solar cells with laser contact opening

Large area (243.36 cm²) back‐junction passivated emitter, rear totally diffused (PERT) solar cells with laser contact opening (LCO) on n‐type mono‐like crystalline Si with efficiencies of 20.2% are presented. Boron emitters with high electrical quality (implied open circuit voltage iV_OC up to 700 mV) are formed during a co‐diffusion step using SiO_x:B layers. Increasing the rear metal contact coverage, we observed a decrease in fill factor (FF) instead of the expected increase due to the decrease of the back side series resistance. We show that it can be attributed to recombination centers (RCs) in the space charge region underneath the contact spots inducing an increasing second diode contribution. The presented empirical model for the RCs implemented in Synopsys Sentaurus TCAD allows for a successful reproduction of the FF, pseudo FF and V_OC behaviour with contact coverage. According to this model, the RCs induced by laser ablation and subsequently evaporation of Al have a shallow exponential distribution with a characteristic length of L_T = 0.2 µm and an effective surface density of N *_T0 = 25 cm^–1. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

On‐Line Monitoring of Chemical Reactions by using Bench‐Top Nuclear Magnetic Resonance Spectroscopy

Real‐time nuclear magnetic resonance (NMR) spectroscopy measurements carried out with a bench‐top system installed next to the reactor inside the fume hood of the chemistry laboratory are presented. To test the system for on‐line monitoring, a transfer hydrogenation reaction was studied by continuously pumping the reaction mixture from the reactor to the magnet and back in a closed loop. In addition to improving the time resolution provided by standard sampling methods, the use of such a flow setup eliminates the need for sample preparation. Owing to the progress in terms of field homogeneity and sensitivity now available with compact NMR spectrometers, small molecules dissolved at concentrations on the order of 1 mmol L^?1 can be characterized in single‐scan measurements with 1 Hz resolution. Owing to the reduced field strength of compact low‐field systems compared to that of conventional high‐field magnets, the overlap in the spectrum of different NMR signals is a typical situation. The data processing required to obtain concentrations in the presence of signal overlap are discussed in detail, methods such as plain integration and line‐fitting approaches are compared, and the accuracy of each method is determined. The kinetic rates measured for different catalytic concentrations show good agreement with those obtained with gas chromatography as a reference analytical method. Finally, as the measurements are performed under continuous flow conditions, the experimental setup and the flow parameters are optimized to maximize time resolution and signal‐to‐noise ratio.     

Contact vibration analysis of the functionally graded material coated half-space under a rigid spherical punch

This paper studies the contact vibration problem of an elastic half-space coated with functionally graded materials (FGMs) subject to a rigid spherical punch. A static force superimposing a dynamic time-harmonic force acts on the rigid spherical punch. Firstly, we give the static contact problem of FGMs by a least-square fitting approach. Next, the dynamic contact pressure is solved by employing the perturbation method. Lastly, the dynamic contact stiffness with different dynamic contact displacement conditions is derived for the FGM coated half-space. The effects of the gradient index, coating thickness, internal friction, and punch radius on the dynamic contact stiffness factor are discussed in detail.     

基于支座反力影响线曲率差分的等截面连续梁损伤识别方法

为了实现仅采用损伤状态信息对等截面连续梁进行损伤识别,通过推导三跨不等跨连续梁在移动荷载作用下的支座反力影响线,发现支座反力影响线求曲率并作差分后的曲线在损伤位置会发生突变,基于该现象提出了一种损伤定位方法,进一步建立了损伤程度计算方法,可对损伤程度进行较精确的定量。通过一三跨连续梁和一四跨连续梁工程实例的仿真分析,证明了支座反力影响线曲率差分指标损伤定位和相应的损伤程度定量方法对等截面连续梁损伤识别具有可行性。     

高温超导体中磁通涡旋薄饼运动的实验证明

为了验证高温超导体中涡旋薄饼运动的存在,我们设计了电流和电位引线分处样品不同表面的实验。实验结果表明,在这种电流电位引线配置下的E～j关系不同于刚性涡旋线运动所预期的E～j关系,由此支持了涡旋薄饼运动的存在。     

A control volume finite element method for three-dimensional three-phase flows

A novel control volume finite element method with adaptive anisotropic unstructured meshes is presented for three-dimensional three-phase flows with interfacial tension. The numerical framework consists of a mixed control volume and finite element formulation with a new P₁DG-P₂ elements (linear discontinuous velocity between elements and quadratic continuous pressure between elements). A “volume of fluid” type method is used for the interface capturing, which is based on compressive control volume advection and second-order finite element methods. A force-balanced continuum surface force model is employed for the interfacial tension on unstructured meshes. The interfacial tension coefficient decomposition method is also used to deal with interfacial tension pairings between different phases. Numerical examples of benchmark tests and the dynamics of three-dimensional three-phase rising bubble, and droplet impact are presented. The results are compared with the analytical solutions and previously published experimental data, demonstrating the capability of the present method.     

基于连续量子级联激光器的1103.4cm–1处NH3混叠吸收光谱特性研究

由于NH3在大气气溶胶化学中具有重要作用,所以快速和精确反演NH3浓度对环境问题非常重要.本文以9.05μm的室温连续量子级联激光器(quantum cascade laser,QCL)作为光源,采用波长扫描直接吸收可调谐二极管激光吸收光谱(tunable diode laser absorption spectroscopy,TDLAS)技术,研究了QCL在1103.4 cm–1的光谱特性,获得了激光器控制的温度电流与波长的关系.设计了QCL二级温控的低压实验平台,测量氨气在1103.4 cm–1处的6条混叠吸收线,在降低压强的情况下谱线展宽变小,使混叠光谱分离,由此计算各条吸收线的线强,进一步对测量不确定度进行分析.针对混叠严重的光谱提出了低压分离单光谱精确反演气体浓度的方法,并进行了实验验证.通过与HITRAN数据库进行结果对比,得出氨气在1103.4 cm–1的实验测量线强值与数据库偏差为2.71%-4.71%,实验测量线强值的不确定度在2.42%-8.92%,极低压条件下反演浓度与实际值的偏差在1%-3%.     

基于故事情景链语法的偶动画短片分析与建模

偶动画是动画领域一个重要的分支,与传统手绘动画同步出现,甚至更早。偶动画作品以其独特的拍摄方法和艺术魅力,为众多艺术家和观众所喜爱。偶动画影片设计周期长、工作量大、生产过程复杂、经济风险高,用传统手工工艺制作完成一部5 min的定格动画影片,通常需要数年。本文以丹麦知名动画导演克里多夫·皮拉丹的《柏树山上的风》及德国格里高利·祖坎导演的《龙焰火枪》为例,提出以故事情节(storyline(i)),?i∈1,2,…,n?与情景链（scenario?chain）语法有限集的形式语言表达式分解偶动画电影的故事元素,通过叙事空间（narrative?space）中镜头画面的组接逻辑,形成不同叙事结构,以分析定格动画电影的故事寓意（implied?meaning）,从故事计算的角度将其转化为标准化设计流程,为构建偶动画电影故事建模理论以及辅助智能计算提供思路,方法提高了偶动画电影的设计与制作效率,为多学科协同创作提供了新模式,使普通偶动画爱好者也能参与创作。     

非PLL相位平均型参考线原型验证

射频相位参考线是粒子加速器的重要组成部分之一,为射频低电平控制系统(LLRF)、束流诊断系统、定时系统等提供稳定的相位锁定参考信号。为减少远距离传输过程中由环境温度变化导致的射频传输线中的射频相位漂移,多个加速器装置中已经采用射频相位参考线提供射频相位参考,这些相位参考的实现方案主要是基于恒温控制和基于光纤锁相。与这些方案相比,采用相位平均方法不仅可以保持长距离节点之间的相位稳定,而且更易于现场安装与维护。现有的带有锁相环(PLL)的终端短路方式实现相位平均参考线的方案仍有一些节点数量限制等方面的不足,本文对相位平均参考线结构进行了去除PLL的简化设计并进行了验证,以期增加更多的相位分配节点以及降低对射频器件参数的要求。对非PLL的单端输入终端短路相位平均方案与两端输入各节点间互为参考的相位平均方案分别进行了实验测试,结果表明两者的相位RMS精度可以达到0.1°~0.3°。并对不同的相位平均实现方案中相位不稳定的产生原因进行了分析,结果表明,除环境温度外,同轴线缆材质、合成相位与幅度的不平衡合成等也是重要影响因素。     

星载海洋激光雷达最佳工作波长分析

星载激光雷达是实现海洋垂直剖面探测的有效工具,也是目前迫切需求的海洋光学遥感手段。对星载海洋激光雷达的波长参数进行评估对保证探测有效性具有重要意义。本文从探测深度和信噪比两方面分析了星载海洋激光雷达探测全球海洋的最佳波长。利用MODIS 10个波段的水体光学特性数据,估算全球海水探测深度及相应的最优波长;并根据太阳夫琅禾费暗线特性,对信号信噪比进行优化。结果表明:在探测深度方面,最优探测波长在488 nm波段的海洋占全球海洋面积的70%左右,并且全球95%以上的海域在488 nm波段的探测深度优于0.8倍的真光层深度;在信噪比方面,相对于488 nm波段,486.134 nm夫琅禾费暗线处采用0.1 nm带宽的滤光片可以将背景光强度降低70%,相应地回波信噪比整体提升了约5.0%。就全球海洋探测来说,使用486.134 nm作为探测波长可以提高探测深度,有效抑制太阳背景光,提高信噪比,因此,486.134 nm是星载海洋激光雷达的最佳工作波长。