Functional Janus dendrimers containing carbazole with liquid crystalline,optical and electrochemical properties

ABSTRACT

Novel liquid crystalline Janus dendrimers that combine a mesogenic block and an electroactive block have been synthesised. The mesogenic block is based on two third-generation Percec-type dendrons bearing six or eight terminal dodecyloxy alkyl chains, whereas the electroactive blocks are formed by one or two carbazole units. The liquid crystal behaviour was investigated by polarised-light optical microscopy, differential scanning microscopy and X-ray diffraction. The Janus dendrimers with one electroactive unit exhibited cubic or columnar liquid crystal phases, whereas the Janus dendrimers with two electroactive units did not show liquid crystalline behaviour. The UV-vis absorption and emission properties of the Janus dendrimers were investigated. The spectra suggested the existence of π-π stacking and the formation of aggregates in the solid state. Electrodeposition of the carbazole-containing dendrimers afforded semi-globular particles in which the number of electropolymerizable units and the flexible or rigid character of the linker have a decisive influence in the particle size.     

Chromium speciation in natural waters using serially connected supported liquid membranes

A supported liquid membrane (SLM) method for the speciation of chromium has been developed. The method is based on selective extraction and enrichment of anionic Cr(VI) and cationic Cr(III) species in two serially connected SLM units. Methyltricaprylammonium chloride (Aliquat) and di-(2-ethylhexyl) phosphoric acid (DEHPA), respectively were used as the selective extractants in the membrane liquid. Graphite furnace atomic absorption spectrometry (GFAAS) was utilised for final determination. Optimised conditions for the DEHPA membrane were, sample solution at pH 3, acceptor solution 0.1 M HNO₃ and 10% w/w carrier in kerosene. The corresponding values for the Aliquat membrane were pH 7, 0.75 M HNO₃ and 6% w/w carrier in di-n-hexylether. This gave extraction efficiencies for Cr(III) and Cr(VI) of 90 and 40%, respectively. The method was used to measure the concentration of Cr III and Cr VI in surface water from an abandoned tannery site. Storage experiments at different pH showed that preservation at neutral pH gave almost constant values over a period of one month. At acidic pH (pH=3.0) the concentration of Cr(VI) decreased rapidly while the concentration of Cr(III) increased. The detection limit, expressed as three times the standard deviation of enriched blank samples was 0.01 μg l⁻¹.     

The Studies of the Heterogeneous Properties of Solid Surfaces by Means of the Derivatograph Q-1500 D

A simple method has been adopted to obtain an important information on the heterogeneous properties of materials studied, adsorbed liquid films and liquid-solid interactions. The method utilizes Q-TG mass loss and the first derivative Q-DTG mass loss curves with respect to temperature and time obtained during programmed liquid thermodesorption in quasi-isothermal conditions. The values of the adsorption capacity, total porosity of material, the value of active centers, desorption energy distribution and mesopore-size distribution functions obtained by this method are in good agreement with those estimated on the basis of independent methods. The theoretical and experimental results provided novel and unique data on the heterogeneity of solid surfaces, properties of liquid adsorbed films and thermal stability of the liquid/solid interfaces. This paper presents the more important results obtained so far in the studies the liquid/solid systems by means of the Paulik's classical and quasi-isothermal techniques. This revised version was published online in July 2006 with corrections to the Cover Date.     

Comparison of octadecyl-bonded silica and styrene-divinylbenzene copolymer sorbents for trace enrichment purposes fundamental aspects II. Linear chromatographic behaviour of the extracting supports

Summary Two reversed-phase LC systems were investigated by frontal analysis for the determination of linear chromatographic conditions, as defined according to the isotherm concept. The Partisil ODS-3 bonded silica and the PRP-1 polystyrene-divinylbenzene resin were used as stationary phases together withtrans-2-hexen-al as test solute and methanol-water mixtures as mobile phases. Particular attention was paid to the respective influence of the two main parameters which may cause sorbent overloading, that is, the capacity factor (k′) and the solute concentration in the mobile phase (C_m). Provided that k′C_m≤10⁻² M, linear chromatographic behaviour was observed for both sorbents, the maximum capacities of which were found greater than 1mmolg⁻¹.     

Adsorption at liquid interfaces: The generalized Frumkin isotherm and interfacial structure

The thermodynamics of adsorption of amphiphilic surface-active compounds at the interface between two immiscible liquids is considered. At the interface, these molecules are supposed to replace a few of the adsorbed molecules of both solvents. Classical isotherms of adsorption (Frumkin, Frumkin-Damaskin, Langmuir, Henry) were based on the model of non-penetrable interface, where an adsorbate can substitute only molecules of one solvent. At the interface between two immiscible electrolytes, nonpolar oil/water interfaces, and liquid membranes amphiphilic molecules can substitute molecules of both solvent and classic isotherms cannot be used. The generalization of Frumkin isotherm for permeable and non-permeable interfaces, known as the Markin-Volkov isotherm, gives the possibility to analyze adsorption in a general case. The adsorption isotherms of pentafluorobenzoic acid at the octane/water interface at different pHs were measured by the drop-weight method. The thermodynamic parameters of pentafluorobenzoic acid (PFBA) adsorption at octane/water interface were determined. From the measurements of PFBA adsorption, the structure of the octane/water interface was determined. Substitution of one adsorbed octane molecule requires approximately three adsorbed PFBA molecules. This result shows that the orientation of solvent molecules at the interface is different from the bulk. Adsorbed octane molecules have a lateral orientation with respect to the interface. Gibbs free energy of adsorption equilibrium and thermodynamic parameters of PFBA adsorption show that the adsorption of PFBA at the octane/water interface is accompanied by a reduction in the attraction between adsorbed PFBA molecules as the pH decreases to the acidic region. Published in Russian in Elektrokhimiya, 2006, Vol. 42, No. 10, pp. 1194–1200. The text was submitted by the authors in English.     

Protein identification by peptide mass fingerprinting and peptide sequence tagging with alternating scans of nano-liquid chromatography/infrared multiphoton dissociation Fourier transform ion cyclotron resonance mass spectrometry

We have developed a method for protein identification with peptide mass fingerprinting and sequence tagging using nano liquid chromatography (LC)/Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS). To achieve greater sensitivity, a nanoelectrospray (nano-ES) needle packed with reversed-phase medium was used and connected to the nano-ES ion source of the FTICR mass spectrometer. To obtain peptide sequence tag information, infrared multiphoton dissociation (IRMPD) was carried out in nano-LC/FTICR-MS analysis. The analysis involves alternating nano-ES/FTICR-MS and nano-ES/IRMPD-FTICR-MS scans during a single LC run, which provides sets of parent and fragment ion masses of the proteolytic digest. The utility of this alternating-scan nano-LC/IRMPD-FTICR-MS approach was evaluated by using bovine serum albumin as a standard protein. We applied this approach to the protein identification of rat liver diacetyl-reducing enzyme. It was demonstrated that this enzyme was correctly identified as 3-alpha-hydroxysteroid dehydrogenase by the alternating-scan nano-LC/IRMPD-FTICR-MS approach with accurate peptide mass fingerprinting and peptide sequence tagging.     

Comparison of sulphur and sulphur–oxygen ligands as ionophores for liquid–liquid extraction and facilitated transport of silver and palladium

The reactivity of new ligands described as S₁, S₅, S₂O₉ (in respect to character and amount of donors) towards metal ions was examined by extraction from HNO₃ and HCl media. These ligands were next utilised as carriers for Ag and Pd transport through a supported liquid membrane (SLM). The effect of collecting a greater number of S donors in one molecule and the influence of type of donors (O–S versus S) on efficiency and selectivity of Ag and Pd(II) extraction and transport were examined.

The extraction of Ag from HNO₃ solutions increased with increasing amount of S-donors in one molecule (S₁2O₉5). For palladium the sequence was different (S₅12O₉). The transport of Ag through SLM impregnated with m-chlorotoluene solution of ionophore increased in the same order as in the case of extraction, whereas for Pd the row was different: S₅2O₉1. The highest fluxes of Ag and Pd transported from HNO₃ equalled to 5.25×10⁻⁷ and 1.37×10⁻⁷ mol/m² s, respectively. Palladium flux depended on stripping solution type (Na₂S₂O₃相似文献   

The chemical bond in polyphosphides: crystal structures, the electron localization function, and a new view of aromaticity in P4(2-) and P5(-)

The incongruent solvation of M(I)4P6 species (M(I) = K, Rb, Cs) in liquid ammonia leads to a broad variety of polyphosphides such as P7(3-), P11(3-), and the putatively aromatic P4(2-) and P5(-), which we investigated by using NMR spectroscopy and single-crystal X-ray structure analysis. The structures of Cs2P4 x 2 NH3, (K@[18]crown-6)3K3(P7)2 x 10 NH3, Rb3P7 x 7 NH3, and (Rb@[18]crown-6)3P7 x 6 NH3 are discussed and compared. The electron localization function ELF is used in a comparison of the chemical bonding of various phosphorus species. The variances of the basin populations provide a well-established measure for electron delocalization and therefore aromaticity. While comparable variance is calculated for P4(2-) and P5(-) it is observed in the lone pairs rather than in the basin populations of the bonds as in the prototypical aromatic hydrocarbons such as benzene or the cyclopentadienide anion. For this behavior, the term "lone pair aromaticity" is proposed.     

Chiral Resolution of the Enantiomers of New Aromatase Inhibitors by Liquid Chromatography on Amylose Stationary Phases

Analytical HPLC methods for derivatized amylose chiral stationary phases were developed for the direct enantioseparation of substituted [1-(imidazo-1-yl)-1-phenylmethyl)] benzothiazolinone and benzoxazolinone derivatives with one stereogenic center. These analogues of fadrozole constitute new potent nonsteroidal inhibitors of aromatase (P450 arom.). The separations were made using normal phase methodology with mobile phase consisting of n-hexane-alcohol (ethanol, 1-propanol or 2-propanol) in various proportions, and a silica-based amylose tris-3,5-dimethylphenylcarbamate (Chiralpak AD), or tris-(S)-1-phenylethylcarbamate (Chiralpak AS). The effects of concentration of various aliphatic alcohols in the mobile phase were studied. Baseline separation (R_s > 1.5) was easily obtained in all cases, ethanol being often the more interesting modifier. The effects of structural features of the solutes along with the temperature of the column on the discrimination between the enantiomers were examined for different mobile phase compositions.     

Conductivity Studies of <Emphasis Type="Italic">n</Emphasis>-Tetrabutylammonium Tetraphenylborate in 3-Pentanone in the Temperature Range from 283.15 to 329.15 K

The molar conductivities (Λ) of solutions of n-tetrabutylammonium tetraphenylborate (NBu₄BPh₄) in 3-pentanone have been measured in the temperature range from 283.15 to 329.15 K. The conductance data have been analyzed using the Lee-Wheaton conductivity equation with the distance parameter (a) set at Bjerrum’s pairing distance, and the limiting molar conductivities (Λ_o) and the association equilibrium constants (K _A) have been derived. The limiting ion conductivities (λ_±^o) have been evaluated according to the method of Krumgalz. The λ₊ ^o values have been compared with λ₊ ^o values calculated from the empirical equation of Gill. The thermodynamic functions, Gibbs energy (Δ G _A ^o), enthalpy (Δ H _A ^o) and entropy (Δ S _A ^o) for the process of ion-pair formation as well as the activation energy of the ionic movement (ΔH ^∗) have been evaluated. The obtained results are discussed in terms of ion-ion and ion-solvent interactions.