DNA Separation by Capillary Electrophoresis with Ultraviolet Detection using Mixed Synthetic Polymers

The mixtures of two polymers, poly (N,N-dimethylacrylamide) (PDMA) and polyvinylpyrrolidone (PVP) were synthesized and used as the separation medium for double-stranded and single-stranded DNA fragments by capillary electrophoresis with UV detector. On optimal conditions, 2%w/v PDMA 2%w/v PVP can be used to separate the doublet 123/124bp in pBR322/Hae Ⅲ Markers.     

高分子合金分离膜材料及结构研究进展

膜材料液相共混制备高分子合金分离膜不但可以调节膜材料与被分离物的亲和性，也在一定程度上改变了膜的结构。本文介绍高分子材料浓相共混对膜材料的亲水性、耐污染性及其它理化性能的影响和对膜结构的调节作用，同时指出高分子材料间的相容性是影响合金膜结构的重要因素。     

Reagent concentration effects in the REM resin solid phase synthesis of tertiary amines

The use of reagent concentration has resulted in increased rates for all stages of the REM resin synthesis of tertiary amines. These increases in rate translate into faster reaction times, higher yields and lower reagent consumption. Of the methods examined, the most successful was the use of perfluorous solvents, either alone or with a small amount of organic co-solvent.     

Diallylacylhydrazines as monomers for polyfunctional water-soluble polymers

Allylation of acetohydrazide afforded the corresponding diallylacylhydrazine, which can be used for syntheses of water-soluble polyfunctional polymers.     

Synthesis of thermally-induced phase separating polymer with well-defined polymer structure by living cationic polymerization. I. Synthesis of poly(vinyl ether)s with oxyethylene units in the pendant and its phase separation behavior in aqueous solution

Living cationic polymerization of alkoxyethyl vinyl ether [CH₂?CHOCH₂CH₂OR; R: CH₃ (MOVE), C₂H₅ (EOVE)] and related vinyl ethers with oxyethylene units in the pendant was achieved by 1-(isobutoxy)ethyl acetate ( 1 )/Et_1.5AlCl_1.5 initiating system in the presence of an added base (ethyl acetate or THF) in toluene at 0°C. The polymers had a very narrow molecular weight distribution (M?_w/M?_n = 1.1–1.2) and the M?_n proportionally increased with the progress of the polymerization reaction. On the other hand, the polymerization by 1 /EtAlCl₂ initiating system in the presence of ethyl acetate, which produces living polymer of isobutyl vinyl ether, yielded the nonliving polymer. When an aqueous solution of the polymers thus obtained was heated, the phase separation phenomenon was clearly observed in each polymer at a definite critical temperature (T_ps). For example, T_ps was 70°C for poly(MOVE), and 20°C for poly(EOVE) (1 wt % aqueous solution, M?_n ～ 2 × 10⁴). The phase separation for each case was quite sensitive (ΔT_ps = 0.3–0.5°C) and reversible on heating and cooling. The T_ps or ΔT_ps was clearly dependent not only on the structure of polymer side chains (oxyethylene chain length and ω-alkyl group), but also on the molecular weight (M?_n = 5 × 10³-7 × 10⁴) and its distribution. © 1992 John Wiley & Sons, Inc.     

Polymer drying. VI. EPR spin-probe studies on swelled poly(styrene-co-divinylbenzene)

The electron paramagnetic resonance (EPR) signal and the residual number (α_t) of volatile molecules per phenyl group of poly(styrene-co-divinylbenzene) in samples that had been swelled to saturation in a dilute solution of a nitroxide spin-probe (TEMPO or 4-oxo-TEMPO), dissolved in a volatile liquid, were monitored simultaneously as the system containing excess liquid was allowed to evaporate to dryness. The results showed that the characteristic motionally narrowed three-line EPR spectrum began to change when α_t became equal to α_g (the number of sorbed molecules per phenyl group of polymer at liquid-saturation). The ratio of the intensity of the low-field and high-field hyperfine peaks relative to the middle peak decreased monotonically to an asymptotic limit that was attained when α_t became equal to α_g (the number of residual adsorbed molecules per phenyl group of polymer at completion of the transition from the rubbery state to the glassy state). The EPR hyperfine pattern, from which the rotational correlation times were estimated, changed most significantly as α_t decreased from α_G to α_g while exhibiting inflections at about α′_s and α′_g the compositions that mark, respectively, incipient desorption of adsorbed molecules and incipient transition from the rubbery state to the glassy state. The pattern between these inflections points, however, varied with the affinity of the solvent for the polymer.     

Interpenetrating polymer networks of poly(dimethyl siloxane–urethane) and poly(methyl methacrylate)

Simultaneous IPNs of poly(dimethyl siloxane-urethane) (PDMSU)/poly(methyl methacrylate) (PMMA) and related isomers have been prepared by using new oligomers of bis(β-hydroxyethoxymethyl)poly(dimethyl siloxane)s (PDMS diols) and new crosslinkers biuret triisocyanate (BTI) and tris(β-hydroxylethoxymethyl dimethylsiloxy) phenylsilane (Si-triol). Their phase morphology have been characterized by DSC and SEM. The SEM phase domain size is decreased by increasing crosslink density of the PDMSU network. A single phase IPN of PDMSU/PMMA can be made at an M_c = 1000 and 80 wt % of PDMSU. All of the pseudo- or semi-IPNs and blends of PDMSU and PMMA were phase separated with phase domain sizes ranging from 0.2 to several micrometers. The full IPNs of PDMSU/PMMA have better thermal resistance compared to the blends of linear PDMSU and linear PMMA. © 1993 John Wiley & Sons, Inc.     

Polymeric organosilicon systems. XVII. Synthesis and photochemical and conducting properties of poly[o-and m-(disilanylene)phenylene]s

Poly[o-(tetramethyldisilanylene)phenylene] ( 2a ), poly[o-(1,2-dimethyldiphenyldisilanylene)-phenylene] ( 2b ), poly[m-(tetramethyldisilanylene)phenylene] ( 2c ), and poly[m-(1,2-dimethyldiphenyldisilanylene)phenylene] ( 2d ) were prepared by the sodium condensation reaction of the corresponding 1,2-and 1,3-bis (chlorosilyl)benzenes in toluene. Irradiation of thin films of 2a-2d in air resulted in a rapid decrease of absorption maxima in the ultraviolet region. The photolysis of 2b and 2d in benzene afforded photodegradation products with low molecular weights. When thin films of 2b and 2d were doped with antimony pentafluoride vapor, films which have conductivities of semi-conductor level were obtained. © 1993 John Wiley & Sons, Inc.     

Polymer crystallization dynamics,as reflected by differential scanning calorimetry. Part 2: Numerical simulations

With the aid of a model for the kinetics of polymer crystallization, as put forward in previous publications, the shape of DSC-curves and their position on the temperature scale were simulated for various conditions of heat transfer in the apparatus. It turns out that the outcome is very dependent on the assumptions made with respect to these heat transfer conditions. For the ideal condition — no temperature differences between sample, pan and furnace — an invariable shape is predicted for the DSC-curves. They only shift to lower temperatures with increasing cooling rates. For more realistic conditions, the curves not only shift but become broader and their maxima decrease. They show a more familiar appearance. These calculations are very involved, however, A simple balance equation is shown to yield equivalent results, if a dimensionless characteristic number like the Nusselt number remains considerably smaller than one. This number contains an effective heat transfer coefficient between sample and furnace which, surprisingly, should not be too high. Apparently, the heat capacity of the pan does not play an important role under these conditions. This is investigated in Appendix II. Appendix I describes the procedure of the numerical simulations.     

Current R & D activities at TRCRE in polymer processing by EB

The current status of the R & D activities is presented on electron beam processing of polymers being carried out at TRCRE. Topics included are sterilization of medical products, graft polymers for selective separation or absorbents and curing of liquid prepolymer-monomer systems.