有机薄膜器件负电阻特性的影响因素

研究了影响有机染料掺杂聚合物薄膜器件负电阻特性的因素，为探索有机负电阻的机理提供实验依据。实验中制备了多种有机染料掺杂聚合物薄膜器件，研究了有机小分子染料、聚合物基体、薄膜组成及厚度、ITO和聚苯胺阳极等对有机染料掺杂聚合物薄膜器件负电阻特性的影响。在室温、大气环境下，所制备的多种有机染料掺杂聚合物器件在所加电压为3～4V时，观察到明显的负电阻特性，电流峰谷比最大约为8。负电阻现象及峰谷比的大小受膜厚和器件的结构、制备工艺等影响。提出用负电阻和二极管并联组成的等效电路模型解释影响负电阻特性的因素，认为负电阻特性与载流子的不平衡注入有关。在此基础上设计、合成了主链含唔二唑电子传输基团的可溶性聚对苯撑乙烯衍生物，该聚合物兼具空穴和电子传输功能，在空气中具有较稳定的N型负电阻特性。进一步控制相关材料和工艺条件，有可能得到易于控制的负阻效应，开发出新型的有机负电阻器件。     

反向驱动的异质结有机薄膜电致发光

成功制备了结构为ITO／PDDOPV／PPQ／Al的异质结聚合物发光二极管。该器件在正反向偏压下均可发光。在正向偏压下的光发射主要来自PDDOPV，但在反向偏压下的光发射则包括来自PPQ的蓝光发射和PDDOPV的黄光发射。蓝光强度与黄光强度的比值随着反向偏压的增加而增加，当反向直流电压分别为22V、24V、26V、28V时，其电致发光光谱中PPQ与PDDOPV的峰高比IPPQ／IPDDOPV分别为1．092、1．329、1．605、2．046。换句话说，该器件的发光颜色是压控可调的，这对实现彩色显示是极为有利的。分析了在反向偏压下的发光机理以及IPPQ／IPDDOPV受电压控制的原因。     

Gas solubility of carbon dioxide in poly(lactic acid) at high pressures: Thermal treatment effect

The sorption of carbon dioxide in glassy Poly(lactic acid) (PLA) films was studied by quartz crystal microbalance (QCM) at high pressures. Two thermal treatments, melted and quenched, were performed in PLA with two different L:D contents, 80:20 and 98:2, films and compared with a third thermal protocol, annealed, and used in a previous work. The results obtained show that for pressures higher than 2 MPa, the carbon dioxide solubility is larger in PLA 80:20 than in PLA 98:2, indicating that the L:D plays a dominant role on this property. The thermal treatments only affect the gas solubility in PLA 98:2. Sorption isotherms at temperatures 303, 313, and 323 K, below the glass transition temperature of the polymer, and pressures up to 5 MPa were measured and analyzed with three different models, the dual‐mode sorption model, the Flory–Huggins equation, and a modified dual‐mode sorption model where the Henry's law term was substituted by the Flory–Huggins equation. This last model performs especially well for CO₂ in PLA 80:20, due to the convex upward curvature of the solubility isotherms for that system. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 616–625, 2007     

基于2,5-二(4′-甲酰基苯基)苯乙烯的螺旋链光学活性聚合物的合成与表征

通过2,5-二溴苯乙烯与对甲酰基苯硼酸的Suzuki偶联反应得到2,5-二(4′-甲酰基苯基)苯乙烯.在催化剂量的冰乙酸存在下,与光学纯的(S)-(-)-α-甲基苄胺或(R)-(+)-α-甲基苄胺发生缩和反应,得到了一对手性非外消旋单体,(+)-2,5-二{4-′[(N-(S)-α-甲基苄亚胺基)次甲基]苯基}苯乙烯和(-)-2,5-二{4′-[(N-(R)-α-甲基苄亚胺基)次甲基]苯基}苯乙烯.以偶氮二异丁腈(AIBN)或过氧化苯甲酰(BPO)为引发剂,经自由基溶液聚合得到光学活性聚合物.比旋光度、紫外-可见吸收光谱以及圆二色光谱研究表明,聚合物主链可能形成了某一方向占优的稳定螺旋构象,且该螺旋构象的旋光方向与单体的旋光方向相反.聚合条件对聚合物的光学活性有很大影响,在极性较大的芳香族溶剂和较高温度下得到的聚合物具有和单体相差更大的比旋光度.侧基的手性基团脱除后,聚合物仍具有一定的旋光性,说明聚合过程中形成的螺旋手性具有一定的记忆效应.     

BF3-doped polyaniline: A novel conducting polymer

We review the unusual structural, transport and magnetic properties of highly conducting polyaniline, doped with boron trifluoride. Our studies establish the unique conducting state of this system, which is in distinct contrast with the conventional proton-doped polyaniline samples.     

Viscometric properties of dilute polystyrene/dioctyl phthalate solutions

We report viscometric data collected in a Couette rheometry on dilute, single‐solvent polystyrene (PS)/dioctyl phthalate (DOP) solutions over a variety of polymer molecular weights (5.5 × 10⁵ ≤ M_w ≤ 3.0 × 10⁶ Da) and system temperatures (288 K ≤ T ≤ 318 K). In view of the essential viscometric features, the current data may be classified into three categories: The first concerns all the investigated solutions at low shear rates, where the solution properties are found to agree excellently with the Zimm model predictions. The second includes all sample solutions, except for high‐molecular‐weight PS samples (M_w ≥ 2.0 × 10⁶ Da), where excellent time–temperature superposition is observed for the steady‐state polymer viscosity at constant polymer molecular weights. No similar superposition applies at a constant temperature but varied polymer molecular weights, however. The third appears to be characteristic of dilute high‐molecular‐weight polymer solutions, for which the effects of temperature on the viscosity curve are further complicated at high shear rates. The implications concerning the relative importance of hydrodynamic interactions, segmental interactions, and chain extensibility with increasing polymer molecular weight, system temperature, and shear rate are discussed. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 787–794, 2006     

12-Ring Network Coordination Polymer——{[Cu(C_4N_2H_(10))_4]_2·H_4V_4O_(14)}_n Formed by Linking cyclo-[H_4V_4O_(14)]~(4-) with Cu(C_4N_2H_(10))~(2+)_4 Cation Clusters

IntroductionThe interest in polyoxometalates that are widelyused in medical chemistry, catalyst reactions, and ma-terial sciences stems from their complicated aggregatesformed by means of corner-, edge- and face-sha-ring[1—4]. The exploitation of new str…     

Elastic and Thermophysical Properties of Poly(Vinyl Chloride) and Chlorinated Polyethylene Blends

The results of experimental and theoretical investigations of elastic and thermophysical properties of poly(vinyl chloride) (PVC) and chlorinated polyethylene (CPE) blends are presented. Eight types of specimens with different ratios of weight contents of PVC and CPE (PVC/CPE = 100/0, 90/10, 80/20, 60/40, 40/60, 20/80, 10/90, and 0/100) were tested. The effect of blend composition on the elastic constants (tensile and shear modulus) is discussed. The data on the thermal conductivity, thermal diffusivity, and heat capacity of the blends investigated are also presented.     

STUDY ON THE CONFORMATIONAL PROPERTIES OF RIGID POLYELECTROLYTE SPU IN SOLUTION

The conformation and dimension of SPU polyanion have been studied by viscosity and quasi-elastic light scattering methods. The rigidity of SPU is somewhat similar to CMC and its hydrodynamic radius decreases only slowly with increasing concentration of NaCl.     

Achievements in the field of proton-conductive portion electrolyte membranes

The 2000–2006 achievements in the field of synthesis, property examination, and application of proton-exchange membranes are reviewed on the basis of more than 120 papers.