高富勒烯的提取,分离和分析

采用二硫化碳重结晶富勒烯混合物或二硫化碳二次抽提烟灰以提取高富勒烯（ｈｉｇｈｅｒｆｕｌｅｒｅｎｅｓ，Ｃｎ，ｎ＞７０）。产物经高效液相色谱分析，高富勒烯的含量从１％分别提高到４％和６％；经激光飞行时间质谱证明，产物中除含主要成分Ｃ６０和Ｃ７０以外，还含有Ｃ７６、Ｃ７８、Ｃ８２、Ｃ８４以及更高碳原子的富勒烯。     

The use of carbon nanofibers microcolumn preconcentration for inductively coupled plasma mass spectrometry determination of Mn,Co and Ni

Based on carbon nanofibers (CNFs) as a solid phase extraction adsorbent, a microcolumn preconcentration method coupled to inductively coupled plasma mass spectrometry (ICP–MS) was developed for the determination of trace elements (Mn, Co and Ni). The effect of various experimental parameters such as pH, sample flow rate and volume, elution solution and interfering ions on the retention of the studied ions have been investigated systematically. During all the steps of the experimental process, Mn, Co and Ni could be quantitatively sorbed on the microcolumn containing CNFs in the range of pH 6.0–9.0, and then eluted completely with 0.5 mol ml^− 1 HNO₃. A preconcentration factor of 150-fold was obtained. The detection limits for Mn, Co and Ni were 40, 0.4 and 8.0 pg ml^− 1, respectively, with relative standard deviations less than 6.0%. In order to validate the proposed method, two certified reference materials of human hair (GBW 07601) and mussel (GBW 08571), and water sample were analyzed with satisfactory results. The recoveries were between 95.0 and 114%.     

Addressing the metabolic activation potential of new leads in drug discovery: a case study using ion trap mass spectrometry and tritium labeling techniques

Metabolic activation of drug candidates to electrophilic reactive metabolites that can covalently modify cellular macromolecules may result in acute and/or idiosyncratic immune system-mediated toxicities in humans. This presents a significant potential liability for the future development of these compounds as safe therapeutic agents. We present here an example of an approach where sites of metabolic activation within a new drug candidate series were rapidly identified using online liquid chromatography/multi-stage mass spectrometry on an ion trap mass spectrometer. This was accomplished by trapping the reactive intermediates formed upon incubation of compounds with rat and human liver microsomes as their corresponding glutathione conjugates and mass spectral characterization of these thiol adducts. Based on the structures of the GSH adducts identified, potential sites and mechanisms of bioactivation within the chemical structure were proposed. These metabolism studies were interfaced with iterative structural modifications of the chemical series in order to block these bioactivation sites within the molecule. This strategy led to a significant reduction in the propensity of the compounds to undergo metabolic activation as evidenced by reductions in the irreversible binding of radioactivity to liver microsomal material upon incubation of tritium-labeled compounds with this in vitro system. With the efficiency and throughput achievable with such an approach, it appears feasible to identify and address the metabolic activation potential of new drug leads during routine metabolite identification studies in an early drug discovery setting.     

Study of the development of thermoresistance in human pancreatic carcinoma cell lines using proteome analysis

In order to find candidate proteins that are potentially associated with the thermoresistant phenotype in combination with drug resistance, we analyzed the differential protein expression in vitro in the human pancreatic cancer cell line EPP85-181-P and classical and atypical multidrug-resistant variants and their thermoresistant counterparts using proteomics. This study identifies sets of proteins that may lead to the development of thermoresistance. These results provide a fundamental basis to elucidate the molecular mechanism of thermoresistance and chemoresistance phenomena that may assist the therapy of inoperable cancers.     

Investigation of carbon-13 nuclear magnetic resonance spectra-structure correlation based on novel atomic distance-edge (ADE) vector

A set of novel graph-theoretical parameters,called the atomic distance-edge (ADE) vector,was developed.Based on the connecting C-C bond number between central carbon atom and the other ones,various carbon atoms of alkanes were classified as four types,i.e.,type 1,2,3 and 4 for primary,secondary,ternary and quaternary carbon,respectively; and then four regression equations were obtained to link carbon-13 chemical shift (CS) of each type of atoms.Furthermore,these regression models were used to predict the carbon-13 nuclear magnetic resonance spectra of alkanes and it was found that the estimated CS were in agreement with the experimental results.     

流动注射在线共沉淀预富集火焰原子吸收法测定痕量铜

研究了以Ｎｉ＾２＋－ＤＤＴＣ为共沉淀载体，流动注射在线共沉淀预富集－火焰原子吸收光谱法测定痕量铜的体系，在０．３ｍｏｌ．Ｌ＾－１的硝酸介质中，铜离子在编织反应器中与Ｎｉ＾２＋－ＤＤＴＣ（产生共沉淀，并被收集在编织器内壁上，用甲基异丁基酮（ＭＩＢＫ）在线洗脱沉积物并引入火争原子化器中测定。当富集时间为４０ｓ时，４０μｇ．Ｌ＾－１的铜１０次测定的相对标准偏差为３．０％，灵敏度提高６０倍，检出限（３σ）     

Photolytic oxidation of As species for determination of total As (including the ‘hidden’ As fraction) in coastal seawater by hydride generation-atomic fluorescence spectrometry

Ultraviolet irradiation (photolysis) in alkaline medium was applied for pretreatment of seawater samples so as to accurately determine total As by continuous-flow hydride generation-atomic fluorescence spectrometry. This sample pretreatment is meant to convert non-reducible As forms into inorganic As, which easily forms arsine. The optimised parameters were the treatment time and the pH of the medium. The behaviour of four hydride-reactive As species [As(III), As(V), MMA, DMA], and AsB, i.e. a typical non-hydride-reactive As species, when subjected to UV irradiation was studied. UV irradiation at pH 1 lead to conversion of all species into As(V) with the exception of AsB and DMA. Conversions of DMA and AsB into As(V) at pH 11 in less than 30 min were observed under UV irradiation. The limit of detection of As (measured as As(V)) by hydride generation-atomic fluorescence spectrometry was 0.1 μg/L and the repeatability of the oxidation procedure was about 10%. The method was applied to determination of total and directly reducible As at 11 sampling points of the Galician Coast (Atlantic Ocean, Spain). Total As concentrations were in the range 1.4-4.8 μg/L. A significant As fraction, between 20 and 44%, depending on the sampling point, corresponded to non-reducible As which was converted by UV irradiation into hydride-reactive As. This fraction should represent the sum of DMA, which yields a low sensitivity in the continuous flow-AFS system, and the hidden As fraction.     

Investigation of the Declared Value of Selenium in Food Supplements by HG-AFS

The method of hydride generation atomic fluorescence spectrometry (HG-AFS) was optimised for determination of selenium in food supplements. Due to the high and varied content of Cu, Mg and Zn in the samples, the standard addition method was found to be the most appropriate. The reliability of the method was checked by the independent method of radiochemical neutron activation analysis, and good agreement was found between the two methods. HG-AFS is simple and rapid for Se determination in food supplements based on minerals. Agreement between the selenium values found and declared was worse than 10% in 9 out of 13 supplements. Furthermore, 2 of the 14 supplements did not comply with the recommendations stated in the 27^th edition of the U.S. Pharmacopoeia, which states that minerals and vitamins in food supplements should be in the range of 90 and 200% of the declared value.     

倾斜交叉差分式激光热透镜光谱法特性研究

本文描述了一个倾斜交叉、差分式激光热透镜光谱法。采用本方法可消除较高的溶剂空白的影响。文章讨论了调制频率和泵浦光功率对热透镜信号的影响,给出了检测Cu~(2+)的工作曲线,讨论了影响方法灵敏度的诸因素,提出了可能的改进方案。     

A new approach for fluorine determination by solid sampling graphite furnace molecular absorption spectrometry

This work deals with the determination of fluorine by solid sampling graphite furnace molecular absorption spectrometry. The molecular absorbance of aluminum monofluoride (AlF), which is produced in the vapor phase in the presence of Al³⁺, is measured at 227.5 nm, a non-resonant platinum line. A conventional graphite furnace program has been used with pyrolysis and vaporization temperatures of 800 and 2300 °C, respectively. Solutions of Ba²⁺ and Al³⁺ have been used to avoid fluorine losses during the pyrolysis stage and to produce AlF in the vaporization stage, respectively. Certified coal and alumina samples were analyzed using aqueous standards for calibration. The agreement between the found concentration and the certified value, or the value obtained by another method ranged from 92 to 105%, with a relative standard deviation less than 8.5%. The limit of detection and the characteristic mass was 0.17 μg g^− 1 and 205 pg, respectively.