Gas chromatography of halogenated adamantanes

The main thermodynamic characteristics of the adsorption of haloadamantanes on graphitized thermal carbon black were determined by experimental measurements and by calculations in terms of molecular-statistic theory of adsorption. Using experimental data, the Kovac retention indices were calculated and the optimum conditions for gas-chromatographic separation of haloadamantanes on stationary phases with different polarity were elucidated. The influence of the cage effect in the adamantane unit on the chromatographic properties of haloadamantanes was established.     

硅钨杂多酸与牛血红蛋白相互作用的研究

多金属氧酸盐作为抗艾滋病病毒、抗流感病毒和抗肿瘤的药物,引起了人们对多金属氧酸与蛋白质之间相互作用的极大关注。蛋白质空间结构的任何变化引起的构象变化都意味着蛋白质分子的活性改变,因此,蛋白质与内源性化合物及许多药物分子之间相互作用的研究一直受到人们关注[1￣3]。血红蛋白是动物及人体内执行输氧任务的蛋白质,是生命机体进行各种生理活动的主要承担者。血红蛋白分子中每条α链和β链含有的色氨酸(Trp)残基分别为α-14Trp、β-15Trp、β-37Trp。Alpert[4]等认为位于疏水腔内的β-37Trp是血红蛋白内源荧光的主要来源,同时β…     

Large deviation analysis of the single server queue

We establish the large deviation principle (LDP) for the virtual waiting time and queue length processes in the GI/GI/1 queue. The rate functions are found explicitly. As an application, we obtain the logarithmic asymptotics of the probabilities that the virtual waiting time and queue length exceed high levels at large times. Additional new results deal with the LDP for renewal processes and with the derivation of unconditional LDPs for conditional ones. Our approach applies in large deviations ideas and methods of weak convergence theory.This work was supported in part by AT&T Bell Labs.     

Phase separation of symmetrical polymer mixtures in thin-film geometry

Monte Carlo simulations of the bond fluctuation model of symmetrical polymer blends confined between two neutral repulsive walls are presented for chain lengthN _A=N _B=32 and a wide range of film thicknessD (fromD=8 toD=48 in units of the lattice spacing). The critical temperaturesT _c (D) of unmixing are located by finite-size scaling methods, and it is shown that , wherev ₃0.63 is the correlation length exponent of the three-dimensional Ising model universality class. Contrary to this result, it is argued that the critical behavior of the films is ruled by two-dimensional exponents, e.g., the coexistence curve (difference in volume fraction of A-rich and A-poor phases) scales as , where ₂ is the critical exponent of the two-dimensional Ising universality class ( ₂=1/8). Since for largeD this asymptotic critical behavior is confined to an extremely narrow vicinity ofT _c (D), one observes in practice effective exponents which gradually cross over from ₂ to ₃ with increasing film thickness. This anomalous flattening of the coexistence curve should be observable experimentally.     

The covariance matrix of the Potts model: A random cluster analysis

We consider the covariance matrix,G ^mm =q ²<(_x,m);(_y,m)>, of thed-dimensionalq-states Potts model, rewriting it in the random cluster representation of Fortuin and Kasteleyn. In any of theq ordered phases, we identify the eigenvalues of this matrix both in terms of representations of the unbroken symmetry group of the model and in terms of random cluster connectivities and covariances, thereby attributing algebraic significance to these stochastic geometric quantities. We also show that the correlation length corresponding to the decay rate of one of the eigenvalues is the same as the inverse decay rate of the diameter of finite clusers. For dimensiond=2, we show that this correlation length and the correlation length of the two-point function with free boundary conditions at the corresponding dual temperature are equal up to a factor of two. For systems with first-order transitions, this relation helps to resolve certain inconsistencies between recent exact and numerical work on correlation lengths at the self-dual point _o. For systems with second order transitions, this relation implies the equality of the correlation length exponents from above and below threshold, as well as an amplitude ratio of two. In the course of proving the above results, we establish several properties of independent interest, including left continuity of the inverse correlation length with free boundary conditions and upper semicontinuity of the decay rate for finite clusters in all dimensions, and left continuity of the two-dimensional free boundary condition percolation probability at _o. We also introduce DLR equations for the random cluster model and use them to establish ergodicity of the free measure. In order to prove these results, we introduce a new class of events which we call decoupling events and two inequalities for these events. The first is similar to the FKG inequality, but holds for events which are neither increasing nor decreasing; the second is similar to the van den Berg-Kesten inequality in standard percolation. Both inequalities hold for an arbitrary FKG measure.     

Volumetric studies and thermodynamics of viscous flow of hydroxamic acids in acetone + water solvent at temperatures 303.15 and 313.15 K

Densities ρ and viscosities η of two hydroxamic acids, N-phenyl-2-chlorobenzo- and N-o-tolyl-4-chlorobenzo-, have been determined as a function of their concentration in aqueous acetone solution at temperatures 303.15 and 313.15 K. Apparent molar volumes, standard-state partial molar volumes and relative viscosities have been calculated. The viscosity data have been analyzed using Jones-Dole equation. The activation thermodynamic parameters of viscous flow have been evaluated using Feakins equation. These were obtained to throw light on the mechanism of viscous flow. Thermodynamic interactions in solutions have been studied in terms of a number of excess functions calculated from the experimental data. The effect of hydroxamic acid concentration and temperature on these parameters has been discussed. The results were interpreted in the light of solute-solvent interactions in aquo-organic media.     

稀土元素在钢中的热力学参数及应用

综合报道了通过采用几种不同的高温金属溶液实验方法，研究所得到的稀土元素在金属溶液冶炼温度范围内分别与硫、氧、氧 硫、碳、氮、低熔点铜、磷、钛、铌、钒等重要元素相互作用规律及有关的一系列热力学参数和温度函数式，并简要地讨论了这些热力学参数在含稀土钢中的应用。     

Multi-element Saha–Boltzmann and Boltzmann plots in laser-induced plasmas

A multi-element Saha–Boltzmann plot method is proposed for the determination of the temperature and the relative number density in laser-induced plasmas, assuming local thermodynamic equilibrium and stoichiometry conservation. The method has been applied to the characterization of a plasma generated with a Cu–Fe–Ni–Mn alloy, using a Nd:YAG laser in air at atmospheric pressure. Spectra of the local emissivity have been obtained by spatial deconvolution of the intensity spectra, obtained with spatial resolution. Saha–Boltzmann plots obtained from the emissivities of 58 spectral lines of Fe I, Fe II, Ni I, Ni II, Mn I and Mn II have been fitted to linear behavior with high correlation, which shows the validity of the equation proposed. Radial distributions of the temperature and number densities of neutral atoms and ions have been determined. The results obtained reinforce the initial considerations of local thermodynamic equilibrium and conservation of stoichiometry. The proposed equation can also be applied to only one ionization species (multi-element Boltzmann plot). Spatially-integrated measurements of the plasma emission have also been performed to show that, in this case, the application of the method to the line intensities provides the two different apparent temperatures for neutral atoms and ions.     

Removal of H2S from Exhaust Gas by Use of Alkaline Activated Carbon

The purpose of this research was to select an activated carbon and alkaline solution blend that generated the best H₂S adsorption on alkaline-activated carbon. RB₂ (activated carbon) impregnated with NaOH solution was shown to have the optimum H₂S removal efficiency. The optimum NaOH concentration was 50 mg per gram of carbon. H₂S adsorption via RB₂-NaOH₅₀ was five times that of a corresponding fresh-activated carbon. The adsorption equivalent of H₂S is nearly 1 (mol-H₂S/mol-AOH), therefore, H₂S + AOH AHS + H₂O was the major reaction. The H₂S adsorption isotherm corresponded to the Freundlich isotherm.     

The thermodynamic properties of alkali metal compounds at high temperatures

A research program has been in progress to obtain reliable thermodynamic data on various binary and ternary alkali metal compounds in the temperature range of 300 to 1500 K. To date, heat capacity measurements have been made on cesium and rubidium chromates, dichromates, zirconates, molybdates, dimolybdates, and halides in the temperature range of 300 to 800K. In addition, measurements are planned or are currently in progress on cesium and rubidium chalcogenides, aluminates, uranates, silicates, and several other lithium, sodium, and potassium compounds. The status of the research program is discussed.