Analysis of the Interactions of Polyvinylpyrrolidone with Conventional Anionic and Dimeric Anionic Surfactant

Classical physical method has been applied in the present study of interaction between water soluble polymer with anionic dimeric and conventional anionic surfactants. Micellization activity of carboxylate-based anionic dimeric (CAD) as well as sodium dodecyl sulfate (SDS) surfactants in the presence of nonionic polymer, that is, polyvinylpyrrolidone (PVP), has been studied through conductometric and surface tensiometric measurements. From these methods the critical aggregation concentrations (CACs), critical micelle concentrations (CMCs), and the effective degree of counterion binding (β) were determined. For the evaluation of behavior of CAD toward the PVP various thermodynamic properties viz. standard Gibbs energy of micellization, standard enthalpy, and entropy of micellization of CAD/PVP mixed system have also been estimated and discussed. The results exhibit that anionic dimeric surfactant interacts strongly with PVP as compared to conventional surfactant.     

Design and Development of Oral Oil-in-Water Nanoemulsion Formulation Bearing Atorvastatin: In Vitro Assessment

The objective of the present investigation was to design a thermodynamically stable and dilutable nanoemulsion formulation of AT-Ca with minimum surfactant concentration that could improve its solubility as well as its oral bioavailability. The composition of optimized nanoemulsion formulation was Sefsol 218 and oleic acid (1:1) 10% w/w, as an oil phase, Tween-20 (19% w/w) as a surfactant, Carbitol (19% w/w) as a cosurfactant and distilled water (52% w/w) as an aqueous phase, containing 10 mg of AT. The optimized formulation showed higher% drug release (99.34%), lower droplet size (42.8 ± 0.42 nm) with low polydispersity index (0.237 ± 0.012), less viscosity (27.51 ± 1.01 cP) and infinite dilution capability. In vitro drug release from the nanoemulsion formulations was highly significant (p < 0.01) as compared to drug suspension.     

Complexation behaviour of benzilmono(Iepidyl)hydrazone (BLH) toward bivalent metal ions: A potentiometric study

Potentiometric investigations on metal complexes of various bivalent metal ions, viz. UO₂(II), Cu(II), Ni(II), Co(II), Cd(II), Pb(II), Zn(II) and Mn(II) with benzilmonol(lepidy!)hydrazone (BLH) have been carried out at different ionic strengths and at different temperatures in order to determine stability constants of the complexes. Thermodynamic parameters ΔC, ΔH and ΔS have also been evaluated from temperature coefficient data. The effect of varying the dielectric constant of the medium on the stability constants of complexes has also been investigated at 30±0.5°C and μ = 0.1MNaCl. Thermodynamic stability constants and thermodynamic stabilization energies for the first transition metals have also been discussed.     

Thermochemistry of interactions of Na+ with benzo-15-crown-5 ether in acetonitrile-water mixtures at 298.15 K

Enthalpies of dissolution of benzo-15-crown-5 ether (B15C5) in mixtures of acetonitrile with water and in solutions of NaI and NaBPh₄ (I=0.05 mol dm^–3) in these mixtures were measured at 298.15 K. From the obtained results and appropriate literature data, the thermodynamic functions of B15C5/Na⁺ complex formation in acetonitrile-water mixtures were determined. The enthalpies of transfer of the complex B15C5/Na⁺ from pure acetonitrile to the examined mixtures were calculated and are discussed.     

Dielectric effect on thermodynamic properties in vinblastine by DFT/Onsager modelling

We know that vinblastine, as one of the vinca alkaloids, has played a major role in cancer chemotherapy by inhibiting the polymerisation of tubulin into microtubules. We present an in-depth investigation of the structural, infrared (IR) spectra of vinblastine. The structure of vinblastine is theoretically investigated using the density functional theory and Hartree–Fock levels of theory with the standard 6-31g* and 6-31g** basis sets. The vibrational spectral data obtained from IR spectra are assigned modes based on the results of the theoretical calculations as intensity and frequency curves. The fundamental vibrational modes were characterised depending on the stability of vinblastine in different dielectric constants. Thermodynamic analysis of data demonstrates good correlation of vinblastine at various media by SCRF–Onsager model with linear coefficient (R ²). Thus, the goal of this article is to evaluate and quantify the molecular basis for vinblastine structure in variant positions.     

Evaluation of Pomegranate (Punica Granatum L.) Pulps for the Removal of Copper(II) Ions: Kinetic,Equilibrium, and Desorption Studies

Pomegranate pulp has been used as novel adsorbent for removing Cu(II) ions from aqueous solution. The optimum conditions for removal of Cu(II) ions were found to be pH 5.32, biosorbent dose 0.1 g, contact time 120 minutes, initial concentration 50 mg/L, and temperature 30°C. The kinetic data were well fitted to the pseudo-second-order model. The biosorption process agreed with the Langmuir isotherm model. Maximum monolayer biosorption capacity was 7.30 mg/g. Thermodynamic parameters suggest that the biosorption process is spontaneous and exothermic. Desorption studies were carried out with different desorbing agents.      

Hydrogen storage over alkali metal hydride and alkali metal hydroxide composites

Alkali metal hydroxide and hydride composite systems contain both protic(H bonded with O) and hydridic hydrogen. The interaction of these two types of hydrides produces hydrogen. The enthalpy of dehydrogenation increased with the increase of atomic number of alkali metals,i.e.,-23 kJ/molH2 for LiOH-LiH, 55.34 kJ/molH2 for NaOH-NaH and 222 kJ/molH2 for KOH-KH. These thermodynamic calculation results were consistent with our experimental results. H2 was released from LiOH-LiH system during ball milling. The dehydrogenation temperature of NaOH-NaH system was about 150℃; whereas KOH and KH did not interact with each other during the heating process. Instead, KH decomposed by itself. In these three systems, NaOH-NaH was the only reversible hydrogen storage system, the enthalpy of dehydrogenation was about 55.65 kJ/molH2, and the corresponding entropy was ca. 101.23 J/(molH2 K), so the temperature for releasing 1.0 bar H2 was as high as 518℃, showing unfavorable thermodynamic properties. The activation energy for hydrogen desorption of NaOH-NaH was found to be57.87 kJ/mol, showing good kinetic properties.     

Change of electrostatic potential of mean force between two curved surfaces due to different salt composition,ion valence and size under certain ionic strength

Change of an electrostatic potential of mean force (EPMF) between two cylindrical rod surfaces with salt composition, ion valence, and ion size at a constant ionic strength of 0.3 M is studied by a classical density functional theory (CDFT) in a primitive model electrolyte solution. Several novel observations are made: (i) strength of a so-called like charge attraction (LCA) reduces in an invariable manner with the salt solution changing from single 2:1 electrolyte to mixture of 2:1 and 1:1 type electrolytes of varying concentration ratios; the change is even over entire range of the composition variation under low surface charge strength, and tends to be insensitive to the composition variation in the presence of the divalent counter-ion, and more and more drastic at a critical point the divalent counter-ion disappears, respectively, as the surface charge strength becomes big enough. (ii) Both monovalent counter-ion and co-ion diameters have only a marginal effect on both the LCA strength and equilibrium distance, and the former “abnormally” affects less than the latter. (iii) Depending on the surface charge strength considered, the divalent counter-ion diameter influences the LCA strength in solution comprised of 2:1 type and 1:1 type electrolytes, monotonously or non-monotonously. All of these findings provide forceful support for a recently proposed hydrogen-bonding style mechanism explaining the LCA.     

Theoretical Study on Thermodynamic Properties and Hydrophilicity of Polychorinated Phenothiazines （PCPTZs）

The thermodynamic properties of 135 polychlorinated phenothiazines (PCPTZs) in the standard state are calculated using a combination of quantum mechanical computations performed with the Gaussian 03 program at the B3LYP/6-311G** level, and their octanol-water partition coefficients (logKow) are calculated based on group contributions. The chlorine substitution pattern strongly influenced the thermodynamic properties and hydrophilicity of the compounds. The thermodynamic properties of congeners also depend on the chlorine substitution pattern. The effect of chlorine substitution pattern is quantitatively studied by considering the number and position of Cl atom substitution (NPCS). The results show that the NPCS model may be used to predict the thermodynamic properties and hydrophilicity for all 135 PCPTZ congeners.     

Linear response and relaxation in quantum lattice systems

For spin-lattice systems, the Kubo formula, expressing the relaxation function in terms of the linear response function, is found to be exact in the thermodynamic limit. In addition, analyticity properties are obtained.