Microanalysis of Volatile Organic Compounds (VOCs) in Water Samples – Methods and Instruments

Volatile organic compounds (VOCs), due to their toxicity and persistence in the environment, are particularly important pollutants. Some of these compounds are mutagens, teratogens or carcinogens, while others are responsible for the degradation of organoleptic parameters such as taste and odour of water. This review focuses on a number of key procedural steps in the analysis of volatile organic compounds (VOCs) in water samples. A wide spectrum of techniques for the isolation and preconcentration of the aforementioned pollutants for trace organic analysis by gas chromatography are presented and discussed. The advantages and disadvantages of these techniques are discussed and novel developments are also taken into consideration.     

Comparative methods in the determination of wax content and pour points of crude oils

In this research, differential scanning calorimetry (DSC) and gas chromatography is used to determine the wax content of fourteen crude oils of different sources. Different empirical equations were applied to compare the wax content of crude oils. For the fourteen crude oil samples with the wax content ranging from 7.5 to 43.8 mass%, it was observed that the results of empirical equations were in good agreement with those determined by DSC and GC. Accordingly, a correlation between ASTM pour point and the temperature at which 2 mass% of wax has precipitated out from crude oil is developed.     

ESI‐QTof‐MS characterization of hirsutinolide and glaucolide sesquiterpene lactones: Fragmentation mechanisms and differentiation based on Na+/H+ adducts interactions in complex mixture

Sesquiterpene lactones (SL) have been reported with various biological effects. Among the described SL skeletons, hirsutinolide and glaucolide have not been extensively studied by mass spectrometry (MS), especially how to distinguish them in organic matrices. Thus, this paper reports (1) a strategy of their differentiation based on MS behavior during the ionization and (2) a proposal of the fragmentation pattern for both SL‐subtypes. ESI(+)‐HRMS data of four isolated SL (hirsutinolides 1 and 3 ; glaucolides 2 and 4 ) were recorded by direct and UPLC water‐sample combined injections. These analyses revealed that hirsutinolides and glaucolides formed [M+Na]⁺ ion during the operation of the direct MS injection, and ([M+Na]⁺ and [M+H‐H₂O]⁺) and [M+H]⁺ ions were respectively observed for hirsutinolides and glaucolides during the operation of combined UPLC water and sample MS injection. Computational simulations showed that the complex hirsutinolide ( 1 )‐Na⁺ formed with a lower preparation energy compared with the complex glaucolide ( 2 )‐Na⁺. However, despite their different behavior during the ionization process, ESI(+)‐HRMS/MS analyses of 1 ‐ 4 gave similar fragmentation patterns at m/z 277, 259, 241, and 231 that can be used as diagnostic ions for both skeletons. Moreover, the differentiation strategy based on the nature of the complex SL‐adducts and their MS/MS fragmentation pattern were successfully applied for the chemical characterization of the extract from Vernonanthura tweedieana using UPLC‐ESI‐HRMS/MS. Among the characterized metabolites, SL with hirsutinolide and glaucolide skeletons showed the aforementioned diagnostic fragments and an ionization behavior that was similar to those observed during the water‐sample combined injection.     

Binary mixtures of cyclohexanone, 2-butanone, 1,4-dioxane and 1,2-dimethoxyethane

Densities and sound velocities of binary mixtures of cyclohexanone, 2-butanone, 1,4-dioxane and 1,2-dimethoxyethane were measured at 298.15 K and also the densities at 303.15 K. Excess volumes were determined from densities. Isentropic compressibilities were determined from densities and sound velocities, and excess thermal expansion factors were determined from excess volumes of two temperatures. Excess isothermal compressibilities and excess isochoric heat capacities were then estimated using excess isobaric heat capacities previously reported. Excess volumes and excess isentropic and isothermal compressibilities were negative except for cyclohexanone+1,4-dioxane system. This revised version was published online in August 2006 with corrections to the Cover Date.     

Characterization of plant oils on a monolithic silica column by high-performance liquid chromatography-atmospheric pressure chemical lonization-mass spectrometry

Summary Five plant oils (peanut, pumpkin seed, sesame seed, soybean, and wheat germ) have been analyzed by high-performance liquid chromatography-atmospheric pressure chemical ionization-mass spectrometry (HPLC-APCI-MS). Gradient elution was performed with acetone-acetonitrile mobile phases on a short monolithic silica column (SilicaROD, RP-18e, 50 mm×4.6 mm). Identification of plant oil triacylglycerols (TAG) was based on the pseudomolecular ion [M+H]⁺ and the diacylglycerol [M−RCO₂]⁺ fragments. Positional isomers of triacylglycerols were identified from the relative intensities of the [M-RCO₂]⁺ fragments. Principal-component analysis, used to find similarities and differences between the different oils, indicated that the different plant oils could be clearly differentiated according to their triacylglycerol composition. Presented at Balaton Symposium '01 on High-Performance Separation Methods, Siófok, Hungary, September 2–4, 2001     

Chiral analysis of pollutants and their metabolites by capillary electromigration methods

Chiral separation of enantiomers is one of the most challenging tasks for any analytical technique including CE. Since the first report in 1985 showing the great possibilities of CE for the separation of chiral compounds, the amount of publications concerning this topic has quickly increased. Although chiral electromigration methods have mainly been used for enantioseparation of drugs and pharmaceuticals, they have also been applied to analyze chiral pollutants. This article intends to provide an updated overview, including works published till January 2005, on the principal applications of CE to the chiral analysis of pollutants and their metabolites, with special emphasis on articles published in the last 10 years. The main advantages and drawbacks regarding the use of CE for chiral separation of pollutants are addressed including some discussion on the foreseen trends of electromigration procedures applied to chiral analysis of contaminants.     

Chemical analysis for small amounts of horseradish peroxidase using “porphyrinogen” as a chromogenic reagent

The properties of porphyrinogen as a new chromogenic reagent were examined. 5,10,15,20-Tetrahydro-tetraphenylporphyrinogen (TPPN) is changed to 5,10,15,20-tetraphenylporphine (TPP) by the oxidative reaction involving six electrons, and its formation of the porphine ring significantly increased the absorbance in the Soret band.The horseradish peroxidase (HRP) accelerated the oxidative reaction as a catalyst and the increment of absorbance depended upon the increase in the concentration of HRP. The reaction proceeded in the presence of dissolved oxygen and in the neighborhood of pH 7. Based on these findings, a chemical analysis by catalytic action using HRP was developed.In the procedure for this determination, the difference in absorbance at 419 nm (ΔA₄₁₉=A_s−A_b, where A_s and A_b are the absorbances of the sample solution containing HRP and the blank solution without HRP after 30 min, respectively), was measured. The determination range of HRP, which was obtained from the ΔA₄₁₉—HRP concentration curve, was 0.05-1.0 mg/l. The relative standard deviation in the median of the calibration curve was 3.19% (seven determinations), and the detection limit (S/N=3) was 29 ng/l. Furthermore, when the proposed method was applied to the enzyme immunoassay, bisphenol A (BPA) was selectively and sensitivity determined.     

Structure-activity relationship of Ca2+ channel blockers: A study using conformational analysis and chemometric methods

Summary A structure-activity relationship study has been done on 8 compounds with the activity known as Ca²⁺ channel blockers. Conformational analysis was carried out using a molecular mechanics method. The 3D-QSAR approach was used and the most polar functional groups present in all the molecules were considered. Eight interatomic distances are necessary to define the relative spatial disposition of these relevant molecular fragments. The structure-activity relationship between interatomic distances and biological activity was performed using statistic and chemometric methods. In particular, with Principal Component Analysis, it was possible to reduce the number of interatomic distances: only six of the eight distances are sufficient to describe the system in a useful way. A classification method was iteratively used to select the most probable conformations linked to the biological activity and to build a model able to classify conformations according to their biological behaviour. Cluster analysis on the active selected conformations subsequently allowed the identification of two different geometrical patterns for the active compounds. Finally the validity of the model was verified by correctly predicting the activity of other molecules not used in the construction of the model but possessing known activity.     

The application of dielectric analysis to drying latex films

Measurements of real and imaginary capacitance (C andC) have been made during the drying of a film-forming latex. In one experiment dielectric measurements at frequencies between 1 Hz and 100 kHz were made simultaneously with gravimetric measurements on a microbalance. It was found that both the rate of water evaporation and the a.c. conductance decrease sharply at high polymer volume fraction. These results are discussed qualitatively in terms of a model for the film-forming process. In another experimentC andC were recorded at 10 Hz along with automatic measurements of the build-up of the scratch resistance of the film. It was found that the mechanical response to film-formation appears significantly earlier than the dielectric response. This is also discussed qualitatively in terms of the model.The authors would like to thank Dr. I. Abrahams, Dr. S. Bell, and Dr. M. Reading for useful discussions regarding this work and M. Bahra for his help with the TFA measurements.