The Kinetics of Formation of Microporous Polytriazine in Diphenyl Sulfone

This study highlights the value of nonisothermal kinetic methods in selecting temperature conditions for the isothermal preparation of microporous polymeric materials. A dicyanate ester is synthesized and the kinetics of its polymerization in diphenyl sulfone are studied by calorimetry under nonisothermal conditions. The kinetics are analyzed by a model-based approach, using the Kamal model, as well as by a model-free approach, using an advanced isoconversional method. Both approaches correctly predict the time to completion of polymerization at a given temperature. The material prepared independently at the predicted temperature is characterized by electron microscopy and CO₂ adsorption measurements and is confirmed to possess a microporous structure with a multimodal distribution of micropores with two major maxima at ~0.5 and 0.8 nm.     

孔梯度陶瓷纤维复合膜管的制备及特性

陶瓷过滤管具有孔隙率高、耐腐蚀、耐高温、机械强度高、便于清洗、使用寿命长等优点,是高温烟尘处理用的高效过滤元件.本文研制了一种具有梯度孔结构堇青石陶瓷纤维复合膜过滤元件,该过滤元件是由多孔支撑体、过渡层和分离膜层组成.其中支撑体、过渡层和分离层的气孔率分别为35～40;、50～60;和60～70;.文中主要分析了孔梯度陶瓷纤维复合膜管的材料结构和抗热震性能,同时对复合膜管进行含尘气体过滤的冷态模拟试验.对于烟气中粒径大于或等于0.1μm的颗粒,复合膜管的截留率达到99.8;以上.     

A New Entropy Function to Analyze Isentropic Processes of Ideal Gases with Variable Specific Heats

A new entropy function s⁺ is defined in terms of the existing entropy function s° and temperature as s⁺ = s° − R lnT to facilitate the analysis of isentropic processes of ideal gases with variable specific heats. The function s⁺ also makes it possible to calculate the entropy changes of ideal gases during processes when volume information is available instead of pressure information and the variation of specific heats with temperature is to be accounted for. The introduction of the function s⁺ eliminates the need to use the dimensionless isentropic functions relative pressure P_r and relative specific volume v_r of ideal gases and to tabulate their values. The P_r and v_r data are often confused with pressure and specific volume, with an adverse effect on the study of the second law of thermodynamics. The new s⁺ function nicely complements the existing s° function in entropy change calculations: the former is conveniently used when volume information is given while the latter is used when pressure information is available. Therefore, the introduction of the new entropy function s⁺ is expected to make a significant contribution to the thermodynamics education and research by streamlining entropy analysis of ideal gases.     

Numerical Study on Entropy Generation of the Multi-Stage Centrifugal Pump

The energy loss of the multi-stage centrifugal pump was investigated by numerical analysis using the entropy generation method with the RNG k-ε turbulence model. Entropy generation due to time-averaged motion and velocity fluctuation was mainly considered. It was found that the entropy generation of guide vanes and impellers account for 71.2% and 23.3% of the total entropy generation under the designed flow condition. The guide vanes are the main hydraulic loss domains and their entropy generation is about 9 W/K, followed by impellers. There are vortices at the tongue of the guide vane inlet as well as flow separations in the impellers, which lead to entropy generation. The fluid impacts the outer surface of the guide vanes, resulting in the increase in entropy generation. There are refluxes near the guide vane tongues which also increase the entropy generation of this part. The entropy generation distribution of the guide vanes and impellers was investigated, which found that the positive guide vane has more entropy generation compared with the reverse guide. The entropy generation of the blade suction surface is higher compared with the pressure surface. This study indicated that the entropy generation method has distinct advantages in the assessment of hydraulic loss.     

林杏琴会堂的音质分析及改进设想

采用精密声级计和双通道声学分析仪，对林杏琴会堂的声场分布、噪声本底和混响时间作了分区测试，应用建筑声学理论对会堂的音质状况进行了分析，并提出改善会堂音质的若干建议．     

基于溶液温度差谱分析的ATR-FTIR原位测量方法

作为一种原位、快速、无损坏的中红外光谱分析技术,ATR-FTIR已在很多工程领域得到越来越多的应用,尤其是针对结晶过程溶液浓度的原位实时测量。水是一种常用的结晶溶剂,在中红外波段具有强吸收峰,并且在不同温度下具有光谱吸收差异性,因而不能忽略溶剂水和温度对溶液浓度的中红外光谱测量带来的影响。以朗伯-比尔定律为基础,提出采用溶液光谱减去相应温度下的溶剂光谱的方法,从而能准确地测量溶液浓度。以L-谷氨酸溶液结晶过程为例,对L-谷氨酸水溶液的原始光谱数据、溶液光谱扣除常温(25℃)溶剂水的光谱数据以及溶液光谱对应温度扣除溶剂水的光谱数据分别进行建模。结果表明,提出的对应温度差谱法能有效消除溶剂水峰对溶质光谱测量的干扰,明显地降低了溶液浓度光谱标定模型的预测误差。该方法对提高原位ATR-FTIR光谱检测精度的实际应用具有一定的参考价值。     

水合硼酸锶的制备及脱水热分解动力学

以氯化锶和硼酸氢铵为原料,采用液相沉淀法制备了片状水合硼酸锶（SrB6O10•5H2O）粉体,并用XRD、FT-IR及SEM进行了表征。利用热重分析法对片状纳米硼酸锶粉体的脱水热分解动力学进行了研究,分别采用 Coats- Redfern 方程和 Flynn-Wall-Ozawa（FWO）法对热重分析数据进行了处理和拟合,初步确定了水合硼酸锶的四步脱水过程及相应的热分解反应机理,得到各步反应的表观活化能和指前因子。     

Experimental Study of Oil Deposition Through a Flow Loop

In this article, the effect of temperature, pressure, and flow rate on deposition rate has been investigated by using chemical analysis method for calculating the deposit thickness and comparing to heat transfer and pressure drop methods. To do so, an experimental high pressure flow loop setup was designed and constructed to conduct various experiments. Caliper readings at the end of each test showed the chemical analysis method in comparison to the heat transfer and pressure drop methods is superior for deposit thickness calculation.     

Analysis of Organic Compounds in Antarctic Snow and Their Origin

Abstract

Organic compounds extractable with n-hexane were identified and quantitatively determined in pack, surface and deep snow samples taken at different depths and collected at several altitudes above sea level from Antarctica during the 1993/94 Italian expedition. The comparison between the composition of organic compounds in snow and the ones in pack and sea-water samples pointed out that the three matrices substantially contain the same biogenic and anthropogenic organic compounds. The contribution of marine aerosol to organic content in the snow is confirmed by the enrichment ratios calculated for the more representative classes of identified compounds (n-alkanes, phthalates and low molecular weight alkylbenzenes). The changes in the composition of organic compounds in snow as the altitude increases seem to depend on the dimensional spectrum of the aerosol. Thus, smallest particles, richest in surfactant material, reach the highest altitudes.