Development of GC–MS/MS method with programmable temperature vaporization large volume injection for monitoring of 17β-estradiol and 2-methoxyestradiol in plasma

Monitoring of estradiol and its metabolites in biological samples is essential for the accurate diagnosis of a number of endocrine diseases. In this study, a sensitive, precise and specific GC–MS/MS method for the quantification of 17β-estradiol (17-BE) and its main metabolite, 2-methoxyestradiol (2-MEOE), in plasma was developed and validated. Plasma concentrations of these steroids are currently investigated as diagnostic markers for pre-eclampsia, a systematic disorder of pregnancy and a leading cause of maternal and fetal morbidity and mortality worldwide.     

含双1,3,4-噁二唑类荧光化合物的合成及荧光性能

在丙基磷酸酐催化条件下,由对甲基苯甲酸和取代苯甲酰肼通过环合反应得到含甲基的1,3,4-噁二唑单环,经高锰酸钾氧化反应得到单环1,3,4-噁二唑芳香酸;然后再次利用丙基磷酸酐的催化效应,实现芳香酸与邻羟基苯甲酰肼的环合反应,制备得到含双1,3,4-噁二唑结构的荧光化合物.利用红外光谱仪和核磁共振谱仪表征了合成产物的结构,并测定了产物的元素组成和荧光性能.结果表明,各合成产物的总收率为44%～49%;目标化合物具有较大的Stokes位移.     

Preparation of Phosphoric-Carboxylic Cation Exchangers from Wood Cellulose

Phosphorus-containing cellulose cation exchangers were synthesized by reaction of wood cellulose with orthophosphoric acid and the ternary polymer from glycidylmethacrylate, styrene, and maleic anhydride. The effects of the ratio of reactants, temperature, and duration of the reaction on the phosphorylation and exchange capacity of the modified cellulose material were studied.     

苯乙烯－马来酸酐共聚物单分子膜的静、动态性质

对不同分子量的苯乙烯－马来酸酐共聚物（PSM）单分子膜的π－A等温线、微 分曲线进行了研究，讨论了PSM单分子膜成膜过程及分子量对膜相变的影响，并用 动态膜障振动法测定了PSM单分子膜的动态弹性，结果表明，分子链的相互作用（ 如卷曲和缠结）在膜的形成中起着重要的作用，并影响膜的静、动态性质，单分子 膜的动态弹性曲线有双峰，且前者比后者小，随分子量增大，膜的凝聚性、刚性和 稳定性都增强，动态弹性都增大；且分子链的相互作用对PSM单分子性质影响增大 ，压缩过程中单分子膜的相变更明显。     

2-(4-氯苯基)-3-甲基丁酸的消旋

以酸酐及有机惰性溶剂作混合溶剂，少量叔胺等作催化剂，2-(4-氯苯基)-3-甲基丁酸能在比较温和的条件下基本完全消旋，收率接近90％。     

顺丁烯二酸二异辛酯的合成

以顺丁烯二酸酐和异辛酯为原料，用对甲苯磺酸作催化剂合成顺丁烯二酸二异辛酯。用正交试验确定了酯化反应的优化条件，酯化率达97．96％．     

Ni-Cu/Al_2O_3催化剂上顺酐液相选择加氢制丁二酸酐反应性能

以Al2O3为载体,采用等体积浸渍法制备了一系列Ni-Cu/Al2O3催化剂,用于顺酐液相加氢反应,并结合低温N2物理吸-脱附、H2程序升温还原、H2程序升温脱附、X射线衍射、CO程序升温表面反应等表征结果,详细考察了催化剂中Cu含量对其催化性能的影响.结果表明,Cu的引入提高了活性组分Ni的分散度,促进了催化剂上C=C的加氢活性;同时,由于Ni-Cu双金属间的相互作用,明显抑制了催化剂表面C=O的加氢.当Cu含量为7%时,催化剂上顺酐加氢定向合成丁二酸酐的活性最高.在210oC,H2压力5.0MPa的条件下反应40min时,顺酐转化率与丁二酸酐选择性均达100%.     

Hβ分子筛催化的甲苯与乙酸酐(AA)酰化反应研究

以Hβ分子筛为催化剂，对甲苯与乙酸酐(AA)的酰化反应进行了研究。通过研究反应温度、压力、甲苯与乙酸酐(AA)摩尔比、催化剂用量、以及溶剂的种类和用量等因素对反应转化率和选择性的影响，确定了较优的反应条件。结果表明，Hβ分子筛对甲苯与乙酸酐(AA)酰化反应具有较好的催化活性和选择性，适宜的反应条件为：温度130 ℃、甲苯/乙酸酐(AA)摩尔比20、催化剂/乙酸酐(AA)重量比0.8，极性溶剂如硝基苯等对酰化反应有一定的促进作用，但选择性有所下将，而非极性溶剂如二氧化碳可部分抑制催化剂的失活。     

Preparation,properties, and application of polypropylene micro/nanofiber membranes

Nanofiber membranes have huge potential applications in many areas due to their unique properties. However, the thermoplastic micro/nanofiber membranes were rarely reported. In this paper, polypropylene (PP) nanofibers were prepared by melt extrusion of immiscible blends of PP, cellulose acetate butyrate (CAB), and subsequent removal of the CAB matrix. The wet‐laid application was used to make PP nanofiber membranes and PP‐g‐MAH/nonwoven micro/nanofiber membrane. The properties of membranes including morphology, apparent density, porosity, contact‐angle, pore size distribution, and water flux were characterized. The results showed that the consequent membranes were provided with optimistic porosity and pore size distribution. Moreover, they were all with high pure water fluxes, which were superior to that of PP microporous membrane. They performed an excellent separation performance of TiO₂ suspension and dyeing wastewater. The work revealed this method could be an efficient one to make thermoplastic polymer micro/nanofiber membranes, and they would have a brilliant potential application for water treatment. Copyright © 2010 John Wiley & Sons, Ltd.     

无机膜反应器用于正丁烷氧化制顺丁烯二酐的研究(英文)

通过浸渍法在中孔γ－Ａｌ２Ｏ３膜上制备出Ｖ－Ｐ－Ｃｏ－Ｃｅ－Ｏ多组分金属氧化物催化膜,将之应用于非燃料电池型催化膜反应器并研究其可行性及正丁烷制顺丁烯二酐的反应特性。考察了反应温度、空速和吹好气流速对催化活性的影响,对膜反应器的稳定性也进行了简单的测试。实验证明,与固定床相比,膜反应器具有更高的反应转化率和选择性。