Ln(Ⅲ)与2-羟基-1-萘醛缩蛋氨酸盐及邻菲咯啉三元配合物的合成与表征

合成了稀土硝酸盐与希夫碱盐2-羟基-1-萘醛缩蛋氨酸钾(以KL表示)及邻菲咯啉(Phen)的四种固体三元配合物。通过元素分析，IR，UV，DTA-TG及摩尔电导分析等手段确定配合物的组成为[Ln(L)(Phen)(NO3)(H2O)]NO3(Ln＝Gd，Dy，Er，Yb)，并对它们的配合方式及某些物理和化学性质进行了研究。     

铽、铕-邻啡啰啉-芳香化合物三元配合物的合成和性质研究

本文对Ln(phen)(C₆H₅COO)₃、Ln(phen)₂P-(OC₆H₄CHO)₃·3H₂O.Ln(phen)₂P-(OC₆H₄COOC₂H₅)₃(Ln=Tb、Eu)固体配合物的制备和光谱性质进行了研究。根据元素分析、红外光谱、摩尔电导测定,X射线粉末衍射、热重差热分析以及紫外可见光谱确定了其组成及配位形式,并对其发光性能进行了研究。     

Transition Metal Atom Sites in Ternary ZrO2-TiO2-SiO2 Xerogels

There has been much work on the binary TiO₂-SiO₂ and ZrO₂-SiO₂ materials prepared by sol-gel because of the beneficial properties resulting from incorporation of Ti and Zr. In contrast the ternary TiO₂-ZrO₂-SiO₂ xerogels have been relatively little studied. We report the results of a study of those xerogels having Zr:Ti:Si ratios of 5:15:80, 10:10:80 and 15:5:80 heated to 750°C and to 1000°C. The study includes X-ray diffraction, small angle X-ray scattering, X-ray absorption spectroscopy at Ti and Zr K-edges, and ¹⁷O MAS-NMR. The study has benefited from close comparison with similar previous studies of the binary systems. The metal atoms in the ternary systems are shown to be predominantly homogeneously mixed in the silica network, as observed for the respective binary systems. The clear exception is for the sample with a minority of Zr, which after heat treatment at 750°C shows the presence of phase separation attributed to the formation of an amorphous precursor of ZrTiO₄; at 1000°C this phase crystallises. In samples with higher Zr content the crystallisation of a ZrO₂ tetragonal phase was observed. The data obtained illustrate well the strength of a research methodology in which a common batch of samples is studied using a coherent suite of modern structural probes.     

Special Mixing Behavior of Chelate-based Ionic Liquid with Methanol

Compared to the general ionic liquids (ILs), a significant deviation of the binary mixtures of 1-decyl-3-methylimidazolium tri(hexafluoroacetylaceto)-copper(II) ([C₁₀mim][Cu(hfacac)₃]) with methanol was found, indicating the way methanol interacts with ILs might be governed by the special structure of the chelating anion. IR results showed that the (C2-H) of 1-decyl-3-methylimidazolium hexafluoroacetylacetonate ([C₁₀mim][hfacac]) blue-shifted more significantly than that of [C₁₀mim][Cu(hfacac)₃], meanwhile the (C=O) red-shifted in [C₁₀mim][Cu(hfacac)₃], which is contrast with that in [C₁₀mim][hfacac]. Two-dimensional correlation analysis of the FTIR spectra indicated that the chelating cavity has little effect on the sequence of the ILs sites that interact with methanol. Combined with small angle X-ray scattering (SAXS) results, the picture of mixing processes in these two systems were proposed. Methanol interacts directly with the anion followed by the cation in [C₁₀mim][hfacac], while methanol preferentially enters the chelating cavity and enhances the packing effect in the [C₁₀mim][Cu(hfacac)₃] system.     

Free energies of transfer of alkali halides from water to urea-water mixtures at 25°C from EMF measurements

The standard potentials_s E ^o of M/M⁺ (M=Li, Na, K, Rb, and Cs) electrodes in aqueous urea solutions containing 12, 20, 30 and 37% by weight of urea have been determined at 25°C from emf measurements on the cell M(Hg)/MCl (m), solvent/AgCl–Ag, from the activities of metals in amalgams by use of a similar type of cell in water, and from the values of_s E ^o of the Ag/AgCl electrode determined earlier. The standard free energies of transfer of MCl, G _t ^o (MCl), from water to the mixed solvents, computed by use of these values and those for the Ag–AgCl electrode, rise sharply from Li⁺ to Na⁺ but fall from Na⁺ to K⁺ and rather sharply from K⁺ to Cs⁺ with a maximum at Na⁺ in all the solvent compositions. This has been attributed to the superimposition of soft-soft interactions on the electrostatic interactions between the ions and the negative charge centers of the possible hydrogen-bonded solvent complexes in the mixed solvents. Comparison of G _t ^o (i) values for individual ions, obtained by a simultaneous extrapolation procedure, with those in aqueous mixtures of methanol,t-butanol, and dimethyl sulfoxide leads to the conclusion that the solvation of these ions in all these solvents is chiefly dictated by the acid-base type of ion-solvent interactions.     

Pervaporation separation of alkane/thiophene mixtures with PDMS membrane

Worldwide concerns over environment have stimulated increasing interest both in academic and industry for deep desulfurization of gasoline. Polydimethylsiloxane (PDMS) composite membrane was used to separate the binary and multicomponent alkane/thiophene mixtures by pervaporation. Effect of carbon number and concentration of alkane, and of feed temperature, on the separation efficiency of alkane/thiophene mixtures was investigated experimentally. Experimental results of binary mixtures indicated that the total fluxes for different alkane/thiophene mixtures decrease with increase of carbon number in the alkanes. Corresponding activation energies of permeation for alkanes in PDMS membrane increase with increase of carbon number in the alkanes. Differences of molecular size and structure of the alkanes lead to various selectivities thereof within PDMS membrane. In addition, the permeability and activation energy of thiophene in various systems differ from each other due to coupling effect which should be taken into consideration when dealing with multicomponent systems. Pervaporation results of ternary systems indicated that, the increase of content of lighter alkane in feed would result in a larger total flux, but a smaller selectivity to thiophene simultaneously. A quaternary system, the mixture of n-heptane, n-octane, n-nonane and thiophene, was employed to simulate the desulfurization process of gasoline. With the membrane having a PDMS layer of 11 μm, the total flux was measured to be about 1.65 kg/m² h, with the corresponding enrichment factor of thiophene 3.9 at 30 °C.     

Aspects of investigating scrambling in the synthesis of porphyrins: different analytical methods

Herein, we discuss the analyses and quantification of the different components in porphyrin mixtures, prepared from p-anisaldehyde, p-tolualdehyde, and 5-(4-bromophenyl)-dipyrromethane with acid catalysis, using NMR and HPLC. The advantages and disadvantages of these analytical methods are emphasized. Due to the similar size of a bromine atom and a methyl group it was possible to grow crystals suitable for X-ray crystallographic studies from a mixture of porphyrins, where the 4-position of the meso-phenyl rings was either substituted with methyl groups or bromine atoms. We also show that X-ray studies are inferior to NMR analysis for determining the components in a porphyrin mixture.     

Phase transitions in ternary caesium lead bromide

Phase transitions in ternary caesium lead bromide (CsPbBr₃) were studied by means of DSC, TMA and high temperature X-ray diffraction. The samples were prepared from the solution by water evaporation and from the melt. on the DSC curves as well as on the temperature dependence of the lattice constants of CsPbBr₃ only two effects were found belonging to the earlier published phase transitions at 88 and 130°C and no further effects. Linear thermal expansion coefficient α of individual CsPbBr₃ modifications were calculated from both TMA and high temperature X-ray diffraction. The structural parameters of the room temperature orthorhombic phase were refined and the results are presented. CsPbBr₃ prepared from the solution contained about 10% of CsPb₂Br₅ and so the DSC curve of pure CsPb₂Br₅ was also measured and an effect at a temperature of 68.5°C was found. This revised version was published online in July 2006 with corrections to the Cover Date.     

Synthesis and crystal structure of ternary molybdate compound K<Subscript>5</Subscript>Pb<Subscript>0.5</Subscript>Hf<Subscript>1.5</Subscript>(MoO<Subscript>4</Subscript>)<Subscript>6</Subscript>

Single crystals of triple molybdate of composition 5:1:3 K₅Pb_0.5Hf_1.5(MoO₄)₆ have been grown and their crystal structure has been solved from X-ray diffraction data (an automated diffractometer X8 APEX, MoK _α -radiation, 2173 F(hkl), R = 0.0321). Trigonal unit cell parameters are: a = b = 10.739(2) Å, c = 37.933(9) Å; V = 3789(1) ų, Z = 6, ρ_calc = 4.014 g/cm³, space group \(R\bar 3\). Three-dimensional mixed framework of the structure is formed by two types of MoO₄ tetrahedra and Pb and Hf octahedra linking via common O-vertices. Potassium atoms of three types occupy large vacancies in the framework.     

Adsorption of the Ternary Liquid Mixture Ethanol/n-Octane/n-Hexadecane onto Activated Carbon: I. The Adsorption Excess of the Ternary Mixture and of Its Binary Combinations

The adsorption isotherms of the binary mixtures of ethanol/n-Octane, ethanol/n-hexadecane and n-octane/n-hexadecane onto the activated carbon TA 95 were measured at 278 K, 288 K, 298 K and 308 K and described with mathematical functions. About 300 experimental values of the adsorption excess of the ternary mixture ethanol/n-octane/n-hexadecane onto activated carbon TA 95 at 298 K were measured by gas chromatography inside the ternary triangle. The ternary miscibility gap was determined at three temperatures. A good representation of the ternary data and the calculated activity coefficients (using the UNIFAC model) in three-dimensional space was possible with the help of transformation of coordinates. It was possible, too, by utilization of the conception of the quasi two-component representation of the mole fractions with and without miscibility gap. Several influencing factors on ternary adsorption isotherms were discussed for the system ethanol/n-octane/n-hexadecane/TA 95.