The influence of implanted xenon on the sputtering yield of silicon

Following implantation labeling with either 200 or 270 keV Xe⁺ the sputtering yield of silicon bombarded with 20 keV Xe⁺ has been determined in situ by means of the backscattering technique (Y = 3.0 ± 0.3 (atoms/ion)). Yield enhancement by up to 60% was observed in cases where the implantation-induced xenon concentrations exceeded the saturation concentration during sputtering. The effect is attributed to (i) an increase in energy deposition at the surface introduced by pronounced xenon loading of the target and (ii) lowering of the surface binding energy. As a consequence the energy dependence of the xenon sputtering yield of silicon is expected to be strongly affected by the energy dependence of the xenon saturation concentration in silicon. Available experimental data support this idea.     

Structural and optical modifications in gamma-irradiated polyimide/silica nanocomposite

The structural and optical properties of thin films of polyimide composites with nanosilica particle content of 15?wt%, prepared via sol–gel process, were studied as a function of the gamma dose. The resultant effect of gamma irradiation on the properties of polyimide/silica nanocomposite has been investigated using X-ray diffraction and UV spectroscopy. Absorption and reflectance spectra were collected by a spectrophotometer giving UV-radiation of wavelength range 200–800?nm. The optical data obtained were analyzed and the calculated values of the optical energy gap exhibited gamma dose dependence. The direct optical energy gap for the nonirradiated polyimide/silica nanocomposite is about 2.41?eV, and increases to a value of 2.65?eV when irradiated with gamma doses up to 300?kGy. It was found that the calculated refractive index of the polyamide/silica increases with the gamma dose in the range 50–300?kGy.     

Study on the Reinforcing Effect of Milled Carbon Fibers in a Natural Rubber Based Composite

Milled carbon fibers (MCF) have been tested at 2, 4, and 6 phr in a standard natural rubber compound with 45 phr of N375 carbon black. A dramatic increase in the low elongation moduli was observed even with only 2 phr of MCF. The presence of MCF confers anisotropic properties to the rubber compounds that can be measured by an anisotropic factor σ, defined as the ratio between the modulus parallel to the MCF prevalent direction over the modulus orthogonal to the MCF prevalent direction. It has been shown that the presence of MCF is able to reduce the mechanical hysteresis and also the compression set of the natural rubber compound. However, the tear strength properties are affected negatively. The present study demonstrates the feasibility and the advantages derived by the utilization of the carbon fibers as extra reinforcing filler in rubber compounds.     

Multi-Armed bandit problem revisited

In this paper, we revisit aspects of the multi-armed bandit problem in the earlier work (Ref. 1). An alternative proof of the optimality of the Gittins index rule is derived under the discounted reward criterion. The proof does not involve an explicit use of the interchange argument. The ideas of the proof are extended to derive the asymptotic optimality of the index rule under the average reward criterion. Problems involving superprocesses and arm-acquiring bandits are also reexamined. The properties of an optimal policy for an arm-acquiring bandit are discussed.This research was supported by NSF Grant IRI-91-20074.     

用形状指数研究苯酚类化合物对大型蚤的急性毒性

基于分子拓扑理论，计算了18种取代苯酚的Kier分子形状拓扑指数（^mK）．利用最小二乘法建立了不同pH值下11种取代苯酚对大型蚤急性毒性（pIC50）的QSAR模型，其相关系数（R^2）依次为：0．963（pH=6．0），0．966（pH=7．8），0.846（pH=9．0）．这些模型的计算值与其实验值基本吻合．通过留一法检验及对其余7种取代苯酚类化合物的pIC50值进行预测，结果表明该模型具有良好的稳健性和预测能力．     

相对性区域创新指数与经济周期挖掘

提出了一类新的相对性区域创新指数,并采用世界专利申请数据对其进行了具体计算.基于区域创新同经济发展水平之间的超线性关系,该指数消除了经济发展水平对创新能力的影响,可以实现对不同发展水平的经济体之间进行有效的创新能力横纵对比.该创新指数尽管极其简单,却揭示出一系列迥异于传统认知的现象,例如中国大陆地区的技术创新能力在1980年代就已经位居世界前列.采用该指数,不但可以在较高水平上解释世界各国的经济增长,还发现它同经济增长率之间的相关性存在一个20年的经济周期.这些结果显示,该指数作为一个单一性指标,以极小的数据依赖就实现了较高程度的解释性,不但重新定位了世界各经济体的创新能力,对深入理解创新同经济发展之间的关系提供了新的角度,而且暗示着这类相对性经济指标的发展潜力与应用空间.     

消光式核壳二聚体传感器的设计与光谱特性分析

根据ITO/Au纳米核壳二聚体粒子在生物医学领域的应用合理性,设计了一种实时检测生物液体的核壳二聚体探针消光式传感器;由偶极子理论推导出输出波长与外界环境折射率关系;利用MATLAB设计ITO/Au纳米核壳二聚体粒子结构;采用软件DDSCAT7.3结合离散偶极近似法,利用二聚体有效半径模拟计算了300~950nm可见光到红外光波段不同核壳比、二聚体间距、以及不同介质折射率的消光光谱;根据传感芯片折射率与偶极共振、耦合八级共振的响应关系得出ITO/Au二聚体的折射率灵敏特性。与传统Ag/Au核壳纳米粒子相比,ITO/Au纳米核壳二聚体结构引入了可作为传感芯片灵敏性自参考参数的耦合八级共振峰,同时ITO/Au二聚体结构的折射率灵敏度可达到419nm/RIU。这些工作及其结果对制作消光式传感器具有重要的意义。     

Applications of Markov spectra for the weighted partition network by the substitution rule

The weighted self-similar network is introduced in an iterative way. In order to understand the topological properties of the self-similar network, we have done a lot of research in this field.Firstly, according to the symmetry feature of the self-similar network, we deduce the recursive relationship of its eigenvalues at two successive generations of the transition-weighted matrix.Then, we obtain eigenvalues of the Laplacian matrix from these two successive generations.Finally, we calculate an accurate expression for the eigentime identity and Kirchhoff index from the spectrum of the Laplacian matrix.     

介质薄膜不同方向折射率的计算

本文应用介电椭球理论,推导出计算介质薄膜不同方向折射率的新公式.