Effects of steric and hydrophobic forces on the rheological properties of ZrO2 suspensions

 The effect of pH on the flow behavior of ZrO₂ suspensions containing polyacrylic and octanoic acids was evaluated. In the flocculated pH regime, the flow behavior is highly shearthinning and can be described by a power-law model. The shear-thinning behavior increases with increasing degree of flocculation. Maximum shearthinning was observed at the zero zeta potential condition. Hydrophobic interaction arising from adsorbed octanoic acid was found to enhance the shear-thinning behavior. No such enhancement was observed for adsorbed polyacrylic acid. It was also illustrated that the viscosity–pH behavior is a mirror image of the yield stress–pH behavior. A quantitative particle-pair interactions model incorporating steric and hydrophobic interactions was proposed to explain the effects of polyacrylic and octanoic acids on the maximum yield stress. Received: 23 May 1997 Accepted: 4 June 1997     

激光光散射研究丙烯酰胺-二甲基二烯丙基氯化铵共聚物的溶液行为

用激光光散射技术表征了阳离子含量受控的丙烯酰胺 二甲基二烯丙基氯化铵共聚物 (简称P(AM DMDAAC) )在 0 1mol LNaCl溶液中的基本参数和溶液行为 .表观基本参数 : Mw ,app =5 0 4× 10 5g·mol- 1 、app =39 9nm和A2 ,APP =1 5× 10 - 4cm3·mol·g- 2 .动态光散射研究结果表明 ,扩散系数Dt 与角度、浓度皆呈非线性依赖关系 ,当C >C 或在较大的散射角域 ,Dt 偏离线性关系所预示的理论值而向减小的方向发展 ,表明存在缔合物 ;流体力学半径Rh 分布有大、小两个范围 ,并随温度升高向小尺寸方向发展 ,证明了体系中存在缔合行为以及升温的解缔合作用 .在一定条件下 ,“亚稳定性”的存在有力地旁证了体系的缔合行为     

A New Method to Investigate the Clustering Phenomena in Supercritical Fluids

EstimationoflocaldensityofsolventaboutthesoluteSolvatochromicbehaviorsofspectroscopicprobesarewidelyusedtoestimatethesol-ventstrengthofsupercriticalfluids(SCF,).i-3lnthiswork,thesolvatochrondcshiftofthen-n*transitionbandforacetone(O.o37mo1.L-')insupercrihcal(SC)CO2wasde-terminedbyUVspectroscopytostUdythesolvationeffect.TheMcRae-BaylissexpressionbasedonthedielectriccontinUUInmodelgivestherelahonshipbetWeenso1vatochromicshiftandpo1arizabilityofnonPolarsolvents4-5asfollows:wherevisthewave…     

Scaling properties of ℤ k- 1 actions on the circle

We derive universal scaling properties for ^k–1 actions on the circle whose generators have rotation numbers algebraic of degreek. As fork=2 these properties can be explained for arbitraryk in terms of a renormalization group transformation. It has at least one trivial fixed point corresponding to an action whose generators are pure rotations. The spectrum of the linearized transformation in this fixed point is analyzed completely. The fixed point is hyperbolic with a (k–1)-dimensional unstable manifold. In the casek=2 the known results are therefore recovered.     

A facile synthesis of aliphatic polybenzoxazoles from a bis(o-aminophenol) or its hydrochloride and aliphatic dinitriles

A facile one-step method for the synthesis of aliphatic polybenzoxazoles has been developed. Thus, a series of aliphatic polybenzoxazoles having inherent viscosities of 0.2–0.7 dL/g in concentrated sulfuric acid were successfully synthesized by the melt polycondensation of alipatic dinitriles with 4,4′-diamino-3,3′-dihydroxybiphenyl (AHB) or its hydrochloride (AHB–HCl) with the elimination of ammonia or ammonium chloride, respectively. Monomer AHB–HCl was more reactive than the parent AHB, thereby affording higher molecular weight polybenzoxazoles in a shorter reaction time. The aliphatic polybenzoxazoles having 6–10 methylene units were highly crystalline with melting temperatures in the range of 187–308°C, which were stable up to 400°C in a melt state in nitrogen. © 1994 John Wiley & Sons, Inc.     

羟基化合物及其葡醛酸苷化学结构与RP—HPLC保留行为相关性研究

采用体外孵育生物合成方法获得羟基化合物葡醛酸苷系列化合物，并对其反相高效液相色谱保留行为及底物与其葡醛酸结合物保留行为相关性进行了研究，建立了相应的结构－色谱保留行为相关性方程及葡醛酸苷类代谢物保留行为的预测方法。将ＱＳＲＲ研究扩展到药物代谢物领域，对药物Ⅱ相葡醛酸化代谢产物的ＨＰＬＣ分析提供了帮助。     

Investigation on property and mechanism of redox wave of methylhesperidine at Hg electrode

The voltammetric behaviors of methylhesperidine (MH) were studied by means of linear sweep voltammetry, cyclic voltammetry and normal pulse voltammetry. In the Brit-ton-Robinson buffer solutions with pH values from 2.05 to 6.37, MH could yield three reduction waves PC1,PC2 and PC3. PC1 wave is an adsorptive pre-wave. PC2 wave is an irreversible reduction of pre-protonated MH involving one electron and one proton. PC3 wave is an irreversible wave of reduction species radical of MH involving one electron.     

有机小分子染料和聚阳离子分子超薄膜的制备及其摩擦学性能研究

制备了以有机小分子染料酸性红 1 8为阴离子、以聚烯丙基氯化铵和聚乙烯亚胺为聚阳离子的分子沉积膜 ,用紫外可见分光光度计、接触角测定仪和椭圆偏振光测厚仪对所制备的超薄膜进行了表征 .用DF PM型动 静摩擦系数精密测定装置考察了超薄膜的摩擦学性能 ,采用扫描电子显微镜对薄膜的磨痕表面进行了观察 .结果表明 ,所制备的超薄复合沉积膜具有良好的减摩和耐磨性能     

Metal complexes of a homopolymer system containing diethanolamine side group: synthesis and dielectrical behaviors

In this work, 4-diethanolaminomethyl styrene (DEAMSt) monomer was prepared by modification of 4-chloromethyl styrene with diethanolamine. The homopolymerization of styrene modificated was carried out by free radical polymerization method at 60?°C in presence of 1,4-dioxane and AIBN. The metal complexes were prepared by reaction of the homopolymer used as ligand P(DEAMSt)L^l and Ni(II), Co(II) metal ions in presence of ethanol and dilute NaOH at 65?°C for 48?h in pH 6.

The structure of modificated monomer, homopolymer used as ligand and polymer-metal complexes were characterized by (FT-IR), ¹H-NMR, ¹³C-NMR, Raman spectroscopy tecniques, elemental analysis, SEM, XRD and magnetic measurements. Their geometric structures according to magnetic measurements of Co(II) and Ni(II) complexes were estimated that have a tetrahedral structure. P(DEAMSt)L^l polymer has a transition state between amorphous and crystalline, whereas metal complexes (Co(II) and Ni(II) are with a large crystal structure. The molecular weight of P(DEAMSt)L¹ homopolymer was determined by gel permeation chromatography (GPC). The glass transition temperature (Tg) of homopolymer was measured by differantial scanning calorimeter (DSC). The thermal behaviors of both ligand and polymer-metal complexes were investigated by thermogravimetric analysis (TGA) and (DTA). The results obtained were compared with each other. Then, the dielectrical measurements (dielectric constant, dielectric loss and conductivity) of the ligand and polymer-metal complexes were investigated as a function of temperature and frequency. The activation energies (Ea) of the ligand and metal complexes were determined from the conductivity measurements.     

Functionalization of chitosan with 3-nitro-4-amino benzoic acid moiety and its application to the collection/concentration of molybdenum in environmental water samples

A chitosan resin functionalized with 3-nitro-4-amino benzoic acid moiety (CCTS-NABA resin) was newly synthesized for the collection/concentration of trace molybdenum by using cross-linked chitosan (CCTS) as base material. The carboxyl group of the moiety was chemically attached to amino group of cross-linked chitosan through amide bond formation. The adsorption behavior of molybdenum as well as other 60 elements on the resin was examined by passing the sample solutions through a mini-column packed with the resin. After the elution of the elements collected on the resin with 1 M HNO₃, the eluates were analyzed by inductively coupled plasma-mass spectrometry (ICP-MS) and atomic emission spectrometry (ICP-AES).

The CCTS-NABA resin can adsorb several metal ions, such as vanadium, gallium, arsenic, selenium, silver, bismuth, thorium, tungsten, tin, tellurium, copper, and molybdenum at appropriate pHs. Among these metal ions, only molybdenum could be adsorbed almost completely on the resin at acidic regions. An excellent selectivity toward molybdenum could be obtained at pH 3–4. The adsorption capacity of CCTS-NABA resin for Mo(VI) was 380 mg g⁻¹ resin. Through the column pretreatment, alkali and alkaline earth metals in river water and seawater samples were successfully removed.

The CCTS-NABA resin was applied to the adsorption/collection of molybdenum in river water and seawater samples. The concentrations of molybdenum in river water samples were found in the range of 0.84 and 0.95 ppb (ng g⁻¹), whereas molybdenum in seawater was about 9 ppb. The validation of the proposed method was carried out by determining molybdenum in the certified reference materials of SLRS-4, CASS-4, and NASS-5 after passing through the CCTS-NABA resin; the results showed good agreement with the certified values.