Molecular Ionics of Anion Receptor Molecules: A Microcalorimetric Study

The coordination of divalent and monovalent inorganic anions to synthetic polyammonium receptors is investigated in aqueous solution around neutral pH by titration calorimetry and NMR spectroscopy. High-affinity 1:1 complexes are formed by a pyrrole type cryptand (1) with sulfate and phosphate, characterized by association constants of almost 107 M^-1. Affinities close to 105 M^-1 are found for polyazacryptands (3 and 4) exhibiting F^-/Cl^- selectivity. The binding affinities and the anion selectivities are mainly caused by the charges of ligands and anions, which is discussed on the basis of simple calculations of the electrostatic contribution to the anion/receptor interactions. The binding of all investigated anions is exothermic at 298.2 K. The contribution of the large negative ΔH values to the free energy of anion binding of the pyrrole type ligand is partially compensated by marked negative ΔS values. These unfavorable entropic contributions are attributed to the additional inclusion of water molecules in the anion/receptor complexes. This revised version was published online in July 2006 with corrections to the Cover Date.     

Preparation and thermal analysis of synthetic malachite CuCO3·Cu(OH)2

The synthesis of malachite CuCO₃·Cu(OH)₂ or Cu₂CO₃(OH)₂ was studied through titrations of copper(II) salt solutions with a solution of sodium carbonate at different temperatures. The precipitates were characterized by TG, IR and chemical analysis. The composition varies depending on thepH of the solution and the temperature. Purer malachite was synthesized by simple mixing of a solution of copper(II) nitrate or sulfate with a solution of sodium carbonate at 50°C.The kinetics of the thermal decomposition of synthetic malachite was described by eitherR ₃ orA _m(m=1.2–1.4) law, according to TG analysis, both isothermal and nonisothermal. The Arrhenius parameters determined using three different integral methods showed the kinetic compensation effect, which is correlated to the working temperature interval analyzed.The authors thank Mr. H. Takemoto for analyzing kinetics of the thermal decomposition of synthetic malachite.     

A Polarographic Study of ϵ-Caprolactam Complexes of Uranium and Tellurium

The polarographic behaviour of uranium and tellurium has been studied in the presence of increasing concentration of complex forming agent viz. ?-caprolactam at pH 4.4 for U(VI) and at pH 10.0 for Te(IV) at μ=0.1 M KNO₃. In both cases the waves have been found to be diffusion controlled and irreversible. The values of kinetic parameters (σπ_a and K°_f,h) have been calculated as a function of the ligand concentration. Method is suitable for the quantitative determination of these metals individually and simultaneously with the effect of diverse ions.     

SYNTHESIS, CHARACTERIZATION, METAL-UPTAKE BEHAVIOR OF BIS（BENZIMIDAZOLE） RESIN SUPPORTED ON EPOXIDE POLYMER

The new chelate resins, abbreviated as PNBMZs and PBBMZs based on epoxide polymer, were synthesized by polycondensation of N,N-diglycidyl-4-glycidyloxyaniline or 1,4-bis（2,3-epoxypropyl）benzene with the primary amine group of 1,3-bis（benzimidazol-2yl）propylamine （BBPAH）. The ion exchangers contain 2.71-3.23 mmol of the ligand contents per gram of the resin. Batch extraction capacities were determined for the metal chloride salts in buffer solutions in the pH range from -1 to 6.0. The chelate resins were very selective for Cu^2＋, Zn^2＋, Cd^2＋ in the presence of other divalent transition metal ions. The maximum uptake capacities of PNBMZ （synthetic molar ratio = 1：1.5） under non-competitive condition were found to be 0.94 mmol/g for Cu^2＋ at pH = 2, 1.3 mmol/g for Cd^2＋ at pH = 1 and 1.75 mmol/g for Zn^2＋ at pH = -1 respectively. While in the case of PBBMZ, it was 1.39 mmol/g for Cd〉 at pH = 1. The metal-uptake behaviors for both of them showed strong pH dependence, and their extraction capacities increase with decreasing pH. The uptake of Cu^2＋ by the resin PNBMZs at pH = 1 was found to be rather fast with t1/2 = 18 min. Metal-uptake experiments under competitive conditions also confirm that the chelate resins have a high selectivity for Cu^2＋, Zn^2＋, Cd^2＋ and the contrary pH dependence.     

Steam-carbon gasification catalyzed by calcium: Assessment of the porous structure of active carbons from plum stones and synthetic active carbons

A need for an elaboration of the methods for synthesis and characterization of activated carbons with a requisite porous structure has existed for a long time. One of the methods giving possibility for creating controlled mesopore and micropore structures deals with the steam gasification of various carbon materials. In this work the effects of calcium catalyst on the catalytic steam gasification of active carbons from plum stones and porous polymers are presented. Determination of micropores capacity and specific adsorption in mesopores have been performed by means of the _s method, but adsorption on the heterogeneous solids was described by the integral equation with various local isotherms. This equation has been solved by the regularization method. Based on this method the changes in structural parameters of active carbons depending on the amount of calcium catalyst were estimated.Nomenclature d width of slit-like micropore - F(x) distribution function of the half-width - p vapor pressure of sorbate - p/p _N relative pressure - PSAC Plum Stone Active Carbon - average pore radius, nm - S ₁ relative limit of the validity of experimental point on the adsorption isotherm in the computations by means of regularization method - SAC Synthetic Active Carbon - S _BET specific surface area calculated by means of BET method, m²/g - S _mes mesopore surface area, m²/g - S _mic micropore surface area, m²/g - T absolute temperature, K - V _mes sorption capacity of mesopores, cm³/g - V _mic sorption capacity of micropores, cm³/g - V _p sorption capacity of pores, cm³/g - w/w weight in weight concentration - x half-width of slit-like micropore, nm - x ₁ maximum of half-width of micropore slit, nm - average half-width of slit-like micropore, nm - X _min-X _max integration limits of thex Greek Letters Greek Letters variance of average half-width of slit-like micropore, nm² - local relative filling of micropores - total relative filling of micropores     

DABCO-directed self-assembly of bisporphyrins (DABCO=1,4-diazabicyclo[2.2.2]octane)

Three isomeric zinc bisporphyrins have been prepared by covalently linking together two aminoporphyrins with an isophthalic acid derivative. The porphyrins differ in the substitution pattern on the meso phenyl groups, that is, ortho, meta, or para. Titrations carried out by UV-visible and 1H NMR spectroscopy have been used to map out the stabilities and the stoichiometries of the complexes formed with 1,4-diazabicyclo[2.2.2]octane (DABCO) in chloroform. The ortho- and meta-substituted bisporphyrins form 1:1 intramolecular sandwich complexes. The para-substituted bisporphyrin cannot adopt the cofacial conformation required for this type of complex and forms a higher order 2:2 intermolecular assembly, which is stable over a wide range of DABCO concentrations.     

从炔烃衍生物出发的有机合成方法学

研究了过渡金属催化的炔烃衍生物的异构化反应.从α,β-炔酮、2-炔酸酯和2-炔酸酰胺可以生成相应的(E,E)-共轭双烯酮、双烯酸酯和双烯酸酰胺.首次从2-炔醇异构化为相应的2-烯酮或2-烯醛.这一反应具有简单、高产率和立体选择性的优点.假设反应烯经过连二烯中间体,然后再异构化成产物,这一反应提供了方便而有潜在应用价值的方法以制备天然产物合成时的重要中间体.     

Purification and partial characterization ofRhizomucor miehei lipase for ester synthesis

A commercialRhizomucor miehei lipase was purified by ammonium sulfate precipitation. Phenyl Sepharose 6 Fast Row hydrophobic interaction chromatography, and DEAE Sepharose Fast Flow anion-exchange chromatography. The recovery of lipase activity was 32% with a 42-fold purification. The molecular size of the purified enzyme was 31,600 Dalton and the pI 3.8. The enzyme was stable for at least 24 h within a pH range of 7.0-10.0, and 96.8% of the enzyme activity remained when kept at 30‡C for 24 h. Further, about 10–30% of the lipase activity was inhibited by K⁺, Li⁺, Ni⁺, Co²⁺, Zn²⁺, Mg²⁺, Sn²⁺, Cu²⁺, Ba²⁺, Ca²⁺, and Fe²⁺ ions and by SDS, but EDTA had no effect. Under the experimental conditions, the optimum temperature for the hydrolysis of olive oil was 50‡C (pH 8.0), and for the synthesis of 1-butyl oleate, 37‡C. It was concluded that hydrolytic activity of lipase alone is not a sufficient criterion for its synthetic potential. The optimal molar ratio of oleic acid and 1-butanol was 2:1 for 1-butyl oleate synthesis. The 1-butyl oleate yield was unaffected by purification of the enzyme after 12 h.     

Modern Synthetic Methods for Fluorine‐Substituted Target Molecules

Fluorine has come to be recognized as a key element in materials science: in heat‐transfer agents, liquid crystals, dyes, surfactants, plastics, elastomers, membranes, and other materials. Furthermore, many fluorine‐containing biologically active agents are finding applications as pharmaceuticals and agrochemicals. Progress in synthetic fluorine chemistry has been critical to the development of these fields and has led to the invention of many novel fluorinated molecules as future drugs and materials. As a result of the electronic effects of fluorine substituents, fluorinated substrates and reagents often exhibit unusual and unique chemical properties, which often make them incompatible with established synthetic methods. Thus, the problem of how to control the unusual properties of compounds with fluorine substituents deserves much attention, so as to promote the design of facile, efficient, and environmentally benign methods for the synthesis of valuable organofluorine targets.