Preparation of apolar glass capillary columns by the barium carbonate procedure

As an extension of previous reports, the barium carbonate procedure has been optimized in detail for the preparation of apolar columns. The aim was to produce optimum overall column characteristics, and to maintain them unchanged under the prolonged influence of the highest possible temperature. The main parameters under optimization were glass variety, leaching of glass surface with aqueous HCl, and amount of barium carbonate deposited, while deactivation and coating were kept constant. The basic column characteristics were adsorption properties and thermostability of deactivation, acid/base behaviour and separation efficiency. They were determined by a new, quantitative testing procedure. Intense leaching was able to eliminate almost totally the differences between glass varieties and to create a well-defined glass surface. While untreated glass, leached glass, and barium carbonate treated glass showed specific weak points in the respective column quality, the combination of leaching and barium carbonate treatment yielded the highest and most stable quality. Some technical modifications of the preparation procedure are described, including deactivation in the gas phase, and use of pentane as a solvent for static coating.     

Hydrogenation of ethyl esters of 4-phenyl-and (2-furyl)-substituted 2,4-dioxobutyric acids at palladium black

The hydrogenation of ethyl 4-R-2,4-dioxobutyrates (R = phenyl, 2-furyl) at 5% Pt/Al₂O₃ catalyst, modified with cinchonidine, and at palladium black was investigated. The former had low activity under the conditions we tested. The main products during the hydrogenation of these compounds at palladium black are ethyl 4-R-2-hydroxy-4-oxobutyrates. The yield of the phenyl derivative amounts to 68.5%, while the yield of the corresponding 2-furyl derivative amounts to 97%. In the last case ethyl 2-hydroxy-4-oxo-4-(2-tetrahydrofuryl)butyrate was detected as impurity. The optimum conditions for the formation of ethyl 2-hydroxy-4-phenylbutyrate (yield 88.2%) were determined. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 5, pp. 655–659, May, 2006.     

Synthesis ofS-(+)-hydroprene

A novel path toS-(+)-hydroprene (1) starting from the technical gradeS-(+)-dihydromyrcene (2, e.e. 50%) is proposed. The latter was selectively transformed intoS-3,7-dimethyloctanal (5) in three steps including hydroalumination. The reactions of5 with allyl- or methallylmagnesium chloride followed, respectively, either by oxygenation in the presence of PdCl₂/CuCl or by ozonolysis, affordS,E-6,10-dimethyl-3-undecen-2-one (7) which was treated with ethoxyethynylmagnesium bromide to give the title juvenile hormone analogue in 23% overall yield.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No 1, pp. 110–112, January, 1993.     

Novel Poly（thienylene Ethynylene）s with Electron-accepting Groups

Since the early works of A. J. Heeger, A G. MacDiarmid and Hideki Shirakawa on semiconducting polymers, π-conjugated oligomers and polymers have been actively investigated for a variety of optoelectronic applications, such as field effect transitors (FET…     

Protection of immobilized sulfhydryl groups against autooxidation by alterations in their microenvironment

Immobilized sulfhydryl groups were prepared by partial thiolation of NH₂-glass beads. The microenvironment of the immobilized SH groups was varied by different chemical modifications of neighboring NH₂ groups. Introduction of a strong charge in the surroundings of immobilized sulfhydryls results in their dramatic stabilization against autooxidation. This effect is due to the salting of O₂ from the surface microlayer of the thiolated beads.     

Hydrothermal synthesis and crystal structure of a layered vanadium oxide with an interlayer metal coordination complex: [Co(phen)3][V10O26]·H2O

A novel compound, [Co(phen)₃][V₁₀O₂₆]·H₂O, was hydrothermally synthesized and characterized by single-crystal X-ray diffraction. This compound crystallizes in the orthorhombic space group Ccca with a=13.447(3), b=29.936(6), c=23.252(5) Å, V=9360(3) Å³, Z=8 and R=0.0285. Data were collected on a Rigaku R-AXIS RAPID IP diffractometer at 293 K in the range of 1.36<θ<24.99°. The structure of the compound consists of vanadium oxide layers, which are built up from the infinite VO₄ chains by corners and edges sharing. The [Co(phen)₃]²⁺ complexes occupy the interlayer space and contact each other via π−π stacking interactions of the phen groups to form infinite one-dimensional chains.     

New aspects of thermal analysis,Part I. Resolution of DSC and means for its optimization

The definitions of the temperature resolution, the so-called resolution of DSC instruments given in literature are discussed. A new definition of the resolution for DSC instruments is presented and outlined. The main characteristic introduced in this new definition is a minimum between two caloric events as a prerequisite of an existing resolution. Possible candidates of test substances have been evaluated. The oligomer n-hexatriacontane is revealing an interesting phenomenon, namely a lambda transition which is in the peak temperature only 2 K lower than the melting temperature of 76°C. The substance was selected as an ideal test substance for the quantification of the resolution of DSC instruments. The lambda transition is a second order process which may reach under certain conditions the saturation of the occurring molecular dislocation within 0.2 K, and after saturation the heat flow rate drops sharply down. Investigations concerning the main characteristics of n-hexatriacontane in respect to the temperatures of transition (lambda transition and melting), to the involved enthalpies, and to the resolution factors were performed as functions of the sample mass and the heating rate. The importance of relevant evaluation procedures increasing the resolution factors of DSC curves are discussed and these procedures are integrated into the testing of the resolution. The necessity for widening the experimental scope from instruments to evaluation procedures is forced by the existence of instruments with built-in signal treatments based on electronic devices and software procedures. A comparison with literature data is outlined for all of the mentioned characteristic values of n-hexatriacontane. This revised version was published online in August 2006 with corrections to the Cover Date.     

Diborane (4) derivatives via coupling of amine monobromocyanoboranes: Study of the bromination of amine cyanoborane and molecular structures of the amine dibromocyanoboranes

The first examples of diborane (4) compounds derived from amine cyanoboranes are described. A series of monobromo derivatives of amine cyanoboranes (A:BHBrCN), and dibromo derivatives (A:BBr₂CN), 1-7, were prepared. Lithiation of the monobromo derivative of trimethylamine cyanoborane, using n-BuLi, did not produce the C-lithiated intermediate Li⁺ [CH₂NMe₂BHBrCN]⁻, but instead the B-lithiated intermediate Li⁺ [Me₃NBHCN]⁻, was obtained. This intermediate, when allowed to react for 16 h, coupled with the un-lithiated trimethylamine monobromocyanoborane (Me₃NBHBrCN) and resulted in diborane (4) derivative formation as the 2LiBr complex. The same result was obtained when one equiv of the trimethylamine monobromocyanoborane was added to the reaction mixture 1 h after lithiation. Following the same procedure, novel diborane (4) derivatives of amine cyanoboranes were successfully obtained, 8-11, as their 2LiBr complexes from the monobromo derivatives of the corresponding amine cyanoboranes. Molecular structures of the trimethylamine dibromocyanoborane, 6, and the triethylamine dibromocyanoborane, 7, were determined using X-ray crystallography.     

Fluorous Synthesis of Biaryl-Substituted Proline Analogs by 1,3-Dipolar Cycloaddition and Suzuki Coupling Reactions

A solution-phase synthesis of bicyclic prolines containing four points of diversity has been developed by a two-step synthesis involving 1,3-dipolar cycloaddition of perfluoroalkylsulfonyl-protected hydroxybenzaldehydes followed by Pd-catalyzed Suzuki coupling reaction of fluorous sulfonates with boronic acids. Both reactions are conducted under microwave irradiation and reaction mixtures are purified by solid-phase extractions without performing chromatography.     

Concentrated electrolyte solutions at high temperatures and pressures

A survey is given of recent experimental results obtained from high-temperature, high-pressure investigations with water, aqueous solutions, and ionic fluids. Data on the static dielectric constant of water to 550°C and 5 kbar are given and discussed with respect to their relation to water structure. Infrared and Raman spectra of HDO in pure water have been obtained to 400°C and 4 kbar, which give information on hydrogen bonding. Xe–H₂O and CO₂–H₂O mixtures were investigated in the infrared. Ni(II) and Cu(II) complexes were investigated by absorption spectroscopy in aqueous solutions of high chloride content to 350°C and 2–6 kbar. The gas-liquid critical point of ammonium chloride was found at 880°C and 1635 bars. This fluid appears to be predominantly ionic even in the critical region. The possibility of converting pure polar fluids such as ammonia and water into concentrated ionic solutions by self-ionization at very high pressures is mentioned.This paper was presented at the symposium, The Physical Chemistry of Aqueous Systems, held at the University of Pittsburgh, Pittsburgh, Pennsylvania, June 12–14, 1972, in honor of the 70th birthday of Professor H. S. Frank.