Investigation on the Adsorption and Corrosion Inhibition Behavior of Gum Acacia and Synergistic Surfactants Additives on Mild Steel in 0.1 M H2SO4

Adsorption and corrosion inhibition effect of gum acacia alone and in presence of surfactants sodium dodecyl benzene sulphonate and cetyltrimethyl ammonium bromide on mild steel in 0.1 M H₂SO₄ in temperature range of 30 to 60°C was investigated using weight loss method, chemical analysis of solution, scanning electron microscopy, atomic force microscopy and determination of thermodynamic parameters. Inhibiting action of gum acacia is synergistically enhanced on addition of small amount of surfactants. SEM and AFM results confirmed the existence of an adsorbed protective film on the mild steel surface. Thermodynamic parameters reveal that adsorption process is spontaneous and obey Freundlich adsorption isotherm.     

Catalysis of N‐Methylaniline‐Blocked Polyisocyanate‐Hydroxyl‐Terminated Polybutadiene Cure Reaction

Catalysis of cure reaction between N‐methylaniline‐blocked polyisocyanate and hydroxyl‐terminated polybutadiene was investigated using a variety of tertiary amine and organotin catalysts. The catalytic activity of amine and organotin compounds was determined from the cure‐time results. It was found that the activity of the catalyst depends upon the steric constrain around the catalytic center. The organotin compounds showed higher catalytic activity than the amine catalysts. FTIR results obtained under isothermal condition revealed that DABCO selectively catalyze the urethane formation reaction, whereas DBTDL catalyze both the allophanate formation and urethane formation reactions during curing process. The synergistic effect of amine and organotin mixed catalysts on the cure reaction was also investigated.     

Synergistic effect of DOPO immobilized silica nanoparticles in the intumescent flame retarded polypropylene composites

The synergistic effect of 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO) immobilized silica (SiO₂‐DOPO) nanoparticles with an intumescent flame retardant (IFR) on the flame retardancy of polypropylene (PP) was investigated by UL 94 vertical tests and limiting oxygen index (LOI) measurements. It was found that the PP/IFR composites (25 wt%) achieved the UL94 V0 grade and LOI increased to 32.1 with an incorporation of 1.0 wt% SiO₂‐DOPO nanoparticles. Based on thermogravimetric analysis, scanning electronic microscopy and rheological analysis, it is speculated that three factors are mainly contributed to the improvement of the flame retardancy. First, the thermal stability of PP/IFR composites was improved by incorporating SiO₂‐DOPO nanoparticles. Second, the presence of SiO₂‐DOPO nanoparticles could induce the formation of a continuous char skin layer during combustion. The compact char layer could effectively impede the transport of bubbles and heat. Third, rheological analysis indicated that SiO₂‐DOPO nanoparticles could increase viscosity of the PP/IFR composites, which was also benefited to increase flame retardancy. Copyright © 2013 John Wiley & Sons, Ltd.     

Synergistic effects of 4A zeolite on the flame retardant properties and thermal stability of a novel halogen‐free PP/IFR composite

The synergistic effects of 4A zeolite (4A) on the thermal degradation, flame retardancy and char formation of a novel halogen‐free intumescent flame retardant polypropylene composites (PP/IFR) were investigated by the means of limiting oxygen index (LOI), vertical burning test (UL‐94), digital photos, scanning electron microscopy (SEM), thermogravimetric analysis (TGA), cone calorimeter test (CCT), laser Raman spectroscopy (LRS) and X‐ray photoelectron spectroscopy (XPS). It was found that a small amount of 4A could dramatically enhance the LOI value of the PP/IFR systems and the materials could pass the UL‐94 V‐0 rating test. Also, it could enhance the fire retardant performance with a great reduction in combustion parameters of PP/IFR system from CCT test. The morphological structures observed by digital and SEM photos revealed that 4A could promote PP/IFR to form more continuous and compact intumescent char layer. The LRS measurement, XPS and TGA analysis demonstrated that the compactness and strength of the outer char surface of the PP/IFR/4A system was enhanced, and more graphite structure was formed to remain more char residue and increase the crosslinking degree. Copyright © 2013 John Wiley & Sons, Ltd.     

Nitrogen and Phosphorus Dual‐Doped Hierarchical Porous Carbon Foams as Efficient Metal‐Free Electrocatalysts for Oxygen Reduction Reactions

Despite tremendous progress in developing doped carbocatalysts for the oxygen reduction reaction (ORR), the ORR activity of current metal‐free carbocatalysts is still inferior to that of conventional Pt/C catalysts, especially in acidic media and neutral solution. Moreover, it also remains a challenge to develop an effective and scalable method for the synthesis of metal‐free carbocatalysts. Herein, we have developed nitrogen and phosphorus dual‐doped hierarchical porous carbon foams (HP‐NPCs) as efficient metal‐free electrocatalysts for ORR. The HP‐NPCs were prepared for the first time by copyrolyzing nitrogen‐ and phosphorus‐containing precursors and poly(vinyl alcohol)/polystyrene (PVA/PS) hydrogel composites as in situ templates. Remarkably, the resulting HP‐NPCs possess controllable nitrogen and phosphorus content, high surface area, and a hierarchical interconnected macro‐/mesoporous structure. In studying the effects of the HP‐NPCs on the ORR, we found that the as‐prepared HP‐NPC materials exhibited not only excellent catalytic activity for ORR in basic, neutral, and acidic media, but also much better tolerance for methanol oxidation and much higher stability than the commercial, state‐of‐the‐art Pt/C catalysts. Because of all these outstanding features, it is expected that the HP‐NPC material will be a very suitable catalyst for next‐generation fuel cells and lithium–air batteries. In addition, the novel synthetic method described here might be extended to the preparation of many other kinds of hierarchical porous carbon materials or porous carbon that contains metal oxide for wide applications including energy storage, catalysis, and electrocatalysis.     

Biocompatible Polymer-Modified Nanoplatform for Ferroptosis-Enhanced Combination Cancer Therapy

Ferroptosis is a novel type of iron-dependent non-apoptotic pathway that regulates cell death and shows unique mechanisms including causing lipid peroxide accumulation, sensitizing drug-resistant cancers, priming immunity by immunogenic cell death, and cooperatively acting with other anticancer modalities for eradicating aggressive malignancies and tumor relapse. Recently, there has been a great deal of effort to design and develop anticancer biocompatible polymeric nanoplatforms including polypeptide and PEGylated ones to achieve effective ferroptosis therapy (FT) and synergistic combination therapies including chemotherapy (CT), photodynamic therapy (PDT), sonodynamic therapy (SDT), photothermal therapy (PTT), gas therapy (GT) including nitric oxide (NO), carbon monoxide (CO), and hydrogen sulfide (H₂S), and immunotherapy (IT). To be noted, the combo therapies such as FT-CT, FT-PTT, FT-GT, and FT-IT are attracting much efforts to fight against intractable and metastatic tumors as they can generate synergistic antitumor effects and immunogenic cell death (ICD) effects or modulate immunosuppressive tumor microenvironments to initiate strong antitumor immunity and memory effects. The polymeric Fenton nano-agents with good biosafety and high anticancer efficacy will provide a guarantee for their applications. In this review, various biocompatible polymer-modified nanoplatforms designed for FT and combo treatments are summarized for anticancer therapies and discussed for potential clinical transitions.     

Photochemical properties of a new kind of anti-cancer drug: N-glycoside compound

Due to the nontoxicity and efficient anti-cancer activity, more and more attention has been paid to N-glycoside compounds. Laser photolysis of N-(α-D-glucopyranoside) salicyloyl hydrazine (NGSH) has been performed for the first time. The research results show that NGSH has high photosensitivity and is vulnerable to be photo-ionized via a monophotonic process with a quantum yield of 0.02, generating NGSH · and hydrated electrons. Under the aerobic condition of cells, the hydrated electrons are very easy to combine with oxygen to generate 1O2 and O2-, both of which are powerful oxidants that can kill the cancer cells. In addition, NGSH · can be changed into neutral radicals by deprotonation with a pKa value of 4.02 and its decay constant was determined to be 2.55×109dm3·mol-1·s-1. NGSH also can be oxidized by SO4-. with a rate constant of 1.76×109 dm3·mol-1.s-1, which further confirms the results of photoionization. All of these results suggest that this new N-glycoside compound might be useful for cancer treatment.     

Microwave synthesis,anti-oxidant and anti-tumor activity of some nucleosides derived 2-oxonicotinonitrile

Abstract

A facile and convenient synthesis of novel cyclic and acyclic nucleoside derivatives incorporating 2-oxo-1,2-dihydropyridine-3-carbonitrile moiety has been described. The aglycons 3a,b were coupled with different activated halosugars such as glucosyl, galactosyl, lactosyl bromides and peracetylated ribose, in addition to, acyclic sugar as 4-bromobutylacetate and 2-acetoxyethoxymethyl bromide in basic medium under conventional and microwave irradiation. Deprotection of the synthesized nucleosides was obtained in presence of Et₃N/MeOH and few drops of water. The structures of the synthesized compounds have been deduced from their elemental analyses and spectral data (IR, ¹H NMR, and ¹³C NMR). Some of the synthesized compounds were screened as antioxidant and anticancer agents. Good and moderate anticancer activities against HepG-2, PC-3 and HCT116 were observed in vitro for some compounds.     

金属氧化物对聚丙烯膨胀阻燃体系阻燃性能的影响

将Bi2O3、Sb2O3、SnO2添加到聚磷酸铵(APP)和双季戊四醇(DPER)膨胀型阻燃聚丙烯(PP)体系中,采用氧指数(OI)、热分析(TGA)、热红联用(TG-FTIR)和扫描电镜(SEM),考察它们对膨胀阻燃体系的催化协效作用,探讨其作用机理.结果表明,3种金属氧化物在适量的添加下都可以提高体系的氧指数.TG结果表明,Bi2O3的加入可以提高膨胀炭层在高温时的热稳定性,增加高温时残余物的量;TG-FTIR结果显示添加Bi2O3后,膨胀阻燃剂在热分解过程中,气体的释放过程发生了改变.膨胀炭层的SEM图表明,Bi2O3可以改善膨胀炭层的形貌,提高炭层的隔热隔质性能.0.1 wt%的Bi2O3和1 wt%的纳米黏土复配用于膨胀阻燃体系中,可以在阻燃剂添加20份下,样品氧指数达到28.3;在阻燃剂添加25时,样品(3.2 mm)通过UL-94 V-0级.0.1 wt%的Bi2O3和1 wt%纳黏粘土的添加,还可以提高体系的力学性能.