Optical spectra of Yb and Yb–Nd interaction in Cs2NaNd0,4Yb0,6Cl6

Interaction between octahedrally coordinated Nd³⁺ and Yd³⁺ in Cs₂NaNd_0,4Yb_0,6Cl₆ reduces the Nd³⁺ luminescence lifetime by roughly two orders of magnitude with respect to that found in Cs₂NaNdCl_{6– · –} Analysis of low temperature absorption and emission spectra reveals that the nonradiative Nd³⁺–Yb³⁺ energy transfer has to be assisted by lattice phonon emission, nevertheless the rate of the transfer is high in the 4–300 K temperature region and attains 5.8×10⁵s^-1 at room temperature. A phase transition of Cs₂NaNd_0,4Yb_0,6Cl₆ between 12 and 13 K is evidenced by abrupt change of both the spectra and lifetimes of Yb³⁺. Reduction of Yb³⁺ lifetime from 5.3 ms to 150 μs is at the transition from low symmetry phase to high symmetry phase is supposed to be associated with a three ion interaction which occurs in ordered lattice and disappears in low temperature disordered structure.     

Crystal structure of KAsUO<Subscript>6</Subscript>·<Subscript>3</Subscript>H<Subscript>2</Subscript>O at 100 and 293 K

The crystal structure of KAsUO₆·3H₂O was solved at 100 K and 293 K. KAsUO₆·3H₂O at T = 100 K: tetragonal, P4/ncc, a = 7.2037(6) Å, c = 17.811(2) Å; Z = 4, R1 = 0.0263, wR2 = 0.0546, for 618 independent reflections; at T = 293 K: tetragonal, P4/ncc, a = 7.1600(4) Å, c = 17.746(1) Å; Z = 4, R1 = 0.0263, wR2 = 0.0433 for 427 independent reflections. The results of X-ray analysis are compared with our previous data on heat capacity of this compound, and changes that take place in the structure at elevated temperature are considered.     

Solid-state polyamidation of hexamethylenediammonium adipate. II. The influence of acid catalysts

Loss of diamine and distinct transition phenomena from the solid to the melt state restrain solid-state polymerization (SSP) of nylon salts from industrial application. To depress these phenomena temperatures well below the melting point of the starting material are employed, resulting however in low reaction rates. The need to use catalysts arises and accordingly in this study hexamethylenediammonium adipate (HMA) particles were polymerized containing a strictly controlled amount of uniformly distributed catalyst. The catalysts included boric, sulphuric, and phosphoric acids with boric acid being the most effective in accelerating the reaction while eliminating the tendency to agglomeration. In general, catalyst concentration up to a critical value plays a considerable role in the overall behavior. Furthermore, in agreement with non catalytic processes, the reaction temperature remains an influential parameter. © 1994 John Wiley & Sons, Inc.     

Dipolar relaxations in an epoxy-amine system

Dipolar relaxations in a reactive epoxy-amine system based on diglycidyl ether of bisphenol A with 4,4^′-diaminodiphenylsulfone were studied with the Havriliak-Negami function. The system was cured isothermally at 140 °C using simultaneous kinetic and microdielectric studies.The relaxation time was calculated from the frequency f_max of the peak of the loss factor ε^′′ versus frequency f. A linear relation exists between the logarithm of the relaxation time τ and the glass transition temperature T_g. Then, logτ follows the Di Benedetto equation revisited by Pascault and Williams allowing the prediction of the relaxation time τ during cure.The unrelaxed permittivity at high frequency ε_u, the relaxed or static permittivity ε_s and the skewness parameter β were found independent on the conversion or the curing time. The distribution parameter α decreases as curing time t increases. The difficulty of orientation of dipoles in the electric field due to vitrification is responsible of these behaviours.     

Absolute line intensity measurements of hot bands for carbonyl sulfide at 12 microm

Using diode-laser spectroscopy, the intensities of 58 lines of the v(1) + v(1/2) - v(1/2) band and 36 lines of the 2v(1) - v(1) band of OCS have been measured. The corresponding band strengths S(0)(v) and the vibrational transition dipoles micro(v) have been derived through least squares fitting of these individual intensities. The band strengths values have been determined with a precision better than 2.5%.     

A Promising MgII‐Ion‐Selective Luminescent Probe: Structures and Properties of Dy–Mn Polymers with High Symmetry

Two Dy–Mn polymers, {[Dy(L¹)₃Mn_1.5(H₂O)₃]?3.125 H₂O}_n ( 1 , L¹=pyridine‐2,6‐dicarboxylic acid) and {[Dy(L²)₃Mn_1.5(H₂O)₆]?8.25 H₂O}_n ( 2 , L² = 4‐hydroxylpyridine‐2,6‐dicarboxylic acid), with high symmetry (S₆) have been prepared. Polymer 1 has a nanoporous 3D framework with channel of about 17.6 Å diameter, while 2 has a honeycomb‐type 2D structure with the cavity of approximately 14.4 Å diameter. In the construction of multidimensional porous polymers with 3d–4f mixed metals, it is the first observation that a ligand substituent effect leads to dramatic differences in the structures formed. Luminescent studies reveal that the emission intensities of 1 and 2 increase significantly upon the addition of Mg²⁺, whereas the introduction of other metal ions leaves the intensity unchanged or even weakens it; hence, both of them may serve as good candidates of Mg²⁺ luminescent probes. To our knowledge, complex 1 is also the first example of a 3d–4f metal‐based nanoporous polymer to exhibit luminescent selectivity for Mg²⁺. Magnetic susceptibility measurements reveal a rather rare ferromagnetic interaction in 2 . Thermal gravimetric analyses and powder X‐ray diffraction investigations have also been performed, suggestive of high thermal stability of 1 .     

Stabilization of γ‘ phase in Bi<Subscript>4</Subscript>V<Subscript>2-x</Subscript>Fe<Subscript>x</Subscript><Superscript>II</Superscript>O<Subscript>11-1.5x</Subscript> series

Summary This work reports the room-temperature stabilization of the Bi₄V_2-xFe_x^IIO_11-1.5x γ ‘ phase, a promising ionic conductive material that finds application in solid oxide fuel cell and oxygen sensor devices. The Fe(II) cation proved to be a better stabilizer than Fe(III), which was previously used, since a lower substitution degree of V⁵⁺ is needed for the former. Powder X-ray diffraction, Fourier-transform infrared spectroscopy and differential scanning calorimetry were used in these experiments.     

Blind Speech Watermarking Method with Frame Self-Synchronization Based on Spread-Spectrum Using Linear Prediction Residue

State-of-the-art speech watermarking techniques enable speech signals to be authenticated and protected against any malicious attack to ensure secure speech communication. In general, reliable speech watermarking methods must satisfy four requirements: inaudibility, robustness, blind-detectability, and confidentiality. We previously proposed a method of non-blind speech watermarking based on direct spread spectrum (DSS) using a linear prediction (LP) scheme to solve the first two issues (inaudibility and robustness) due to distortion by spread spectrum. This method not only effectively embeds watermarks with small distortion but also has the same robustness as the DSS method. There are, however, two remaining issues with blind-detectability and confidentiality. In this work, we attempt to resolve these issues by developing an approach called the LP-DSS scheme, which takes two forms of data embedding for blind detection and frame synchronization. We incorporate blind detection with frame synchronization into the scheme to satisfy blind-detectability and incorporate two forms of data embedding process, front-side and back-side embedding for blind detection and frame synchronization, to satisfy confidentiality. We evaluated these improved processes by carrying out four objective tests (PESQ, LSD, Bit-error-rate, and accuracy of frame synchronization) to determine whether inaudibility and blind-detectability could be satisfied. We also evaluated all combinations with the two forms of data embedding for blind detection with frame synchronization by carrying out BER tests to determine whether confidentiality could be satisfied. Finally, we comparatively evaluated the proposed method by carrying out ten robustness tests against various processing and attacks. Our findings showed that an inaudible, robust, blindly detectable, and confidential speech watermarking method based on the proposed LP-DSS scheme could be achieved.     

Phase Transitions Induced by Top-Priority of Randomization

We study the characteristics of phase transition to take the top-priority of randomization in the rules of NaSch model (i.e.noise-first model) into account via computing the relaxation time and the order parameter.The scaling exponents of the relaxation time and the scaling relation of order parameter,respectively,axe obtained.