Resistance switching memory in perovskite oxides

The resistance switching behavior has recently attracted great attentions for its application as resistive random access memories (RRAMs) due to a variety of advantages such as simple structure, high-density, high-speed and low-power. As a leading storage media, the transition metal perovskite oxide owns the strong correlation of electrons and the stable crystal structure, which brings out multifunctionality such as ferroelectric, multiferroic, superconductor, and colossal magnetoresistance/electroresistance effect, etc. The existence of rich electronic phases, metal–insulator transition and the nonstoichiometric oxygen in perovskite oxide provides good platforms to insight into the resistive switching mechanisms.     

Fully automated reagent peak‐free liquid chromatography fluorescence analysis of highly polar carboxylic acids using a column‐switching system and fluorous scavenging derivatization

In this study, we combined a column‐switching system with a fluorous scavenging derivatization method to develop a fully automated reagent peak‐free LC fluorescence detection protocol for the analysis of highly polar carboxylic acids. In this method, highly polar carboxylic acids were derivatized with fluorescent 1‐pyrenemethylamine in the presence of 1‐ethyl‐3‐(3‐dimethylaminopropyl)carbodiimide and 1‐hydroxy‐1H‐benzotriazole. Residual excess of the unreacted reagent was tagged with 2‐(perfluorooctyl)ethyl isocyanate and then removed selectively using a fluorous column‐switching system placed in front of an analytical reversed‐phase column. The signal of the fluorous‐tagged unreacted reagent was completely absent in the resulting chromatograms; therefore, it did not interfere with the quantification of each acid especially those eluted before 20 min. The detection limits (S/N = 3) for the examined acids were in the range from 4.0 to 22 fmol per injection. We have applied this method to comparative analysis of highly polar carboxylic acids in urine samples obtained from diabetes mellitus type‐II model mice and their control.     

Versatile lipid profiling by liquid chromatography–high resolution mass spectrometry using all ion fragmentation and polarity switching. Preliminary application for serum samples phenotyping related to canine mammary cancer

Lipids represent an extended class of substances characterized by such high variety and complexity that makes their unified analyses by liquid chromatography coupled to either high resolution or tandem mass spectrometry (LC–HRMS or LC–MS/MS) a real challenge. In the present study, a new versatile methodology associating ultra high performance liquid chromatography coupled to high resolution tandem mass spectrometry (UHPLC–HRMS/MS) have been developed for a comprehensive analysis of lipids. The use of polarity switching and “all ion fragmentation” (AIF) have been two action levels particularly exploited to finally permit the detection and identification of a multi-class and multi-analyte extended range of lipids in a single run. For identification purposes, both higher energy collision dissociation (HCD) and in-source CID (collision induced dissociation) fragmentation were evaluated in order to obtain information about the precursor and product ions in the same spectra. This approach provides both class-specific and lipid-specific fragments, enhancing lipid identification. Finally, the developed method was applied for differential phenotyping of serum samples collected from pet dogs developing spontaneous malignant mammary tumors and health controls. A biological signature associated with the presence of cancer was then successfully revealed from this lipidome analysis, which required to be further investigated and confirmed at larger scale.     

A transflective and viewing angle controllable blue-phase liquid crystal display

A polymer-stabilised blue-phase liquid crystal display (PSBP-LCD) with double-side in-plane switching (DS-IPS) electrode structure is proposed. This structure shows the transflective characteristics because the bottom electrodes are made by aluminium material. For transflective displays, it exhibits a well-matched voltage-dependent transmission and reflection curves through designing the width and gap of the top electrodes. When a bias voltage is applied on the top electrodes, it exhibits as a good viewing angle controllable display.     

A new memory effect: smectic liquid crystalline memory having both conductive and optical memory

In order to compensate for light leakage in the oblique viewing directions of the dark state of the horizontal-switching mode such as the in-plane switching and fringe field switching modes. The viewing angle performance of the horizontal-switching mode with an compensation film has been evaluated on a case by case basis according to the retardation values of the films. Consequently, we found that a much better dark state can be achieved by using an optimised compensation film.     

Investigation on ion movement in the fringe-field switching mode depending on resistivity of alignment layer and dielectric anisotropic sign of liquid crystal

Adsorption and desorption of ions at interface between liquid crystal and alignment layer in liquid crystal displays play a crucial role in residual direct current voltage associated with image sticking. In this article, the dependency of such adsorption and desorption of ions on resistivity of alignment layer and sign of liquid crystal dielectric anisotropy in the fringe-field liquid crystal cell has been investigated. Our studies show that the time constant of ions during adsorption and desorption depends upon resistivity and dielectric constant of liquid crystal and alignment layer, and most strongly influenced by the resistivity of alignment layer such that the one with lower resistivity in two orders shows much faster adsorption and desorption at the interface than that of the one with higher resistivity.     

Dual switchable six-ring bent-core liquid crystals with azo linkages exhibiting B1 and B2 mesophases

A new series of asymmetric bent-core compounds were synthesised using azo linkages with equal as well as unequal terminal alkyl chains and their photo and electrical switching properties investigated. The mesomorphic properties were characterised using polarised optical microscopy, X-ray diffraction and differential scanning calorimetry. The lower homologues of the series of compounds show a B₁ phase whereas higher homologues exhibit a B₂ phase. The B₂ phase shows an anticlinic-antiferroelectric switching behaviour during electro-optic measurements. The photo-switching properties of the azobenzene containing bent-core molecules were investigated using ultraviolet-visible spectroscopy. The trans to cis photo isomerisation was observed at 25 s whereas reverse processes took 14 h in chloroform.     

Solvent‐Induced Helical Assembly and Reversible Chiroptical Switching of Chiral Cyclic‐Dipeptide‐Functionalized Naphthalenediimides

Understanding the roles of various parameters in orchestrating the preferential chiral molecular organization in supramolecular self‐assembly processes is of great significance in designing novel molecular functional systems. Cyclic dipeptide (CDP) chiral auxiliary‐functionalized naphthalenediimides (NCDPs 1 – 6 ) have been prepared and their chiral self‐assembly properties have been investigated. Detailed photophysical and circular dichroism (CD) studies have unveiled the crucial role of the solvent in the chiral aggregation of these NCDPs. NCDPs 1 – 3 form supramolecular helical assemblies and exhibit remarkable chiroptical switching behaviour (M‐ to P‐type) depending on the solvent composition of HFIP and DMSO. The strong influence of solvent composition on the supramolecular chirality of NCDPs has been further corroborated by concentration and solid‐state thin‐film CD studies. The chiroptical switching between supramolecular aggregates of opposite helicity (M and P) has been found to be reversible, and can be achieved through cycles of solvent removal and redissolution in solvent mixtures of specific composition. The control molecular systems (NCDPs 4 – 6 ), with an achiral or D ‐isomer second amino acid in the CDP auxiliary, did not show chiral aggregation properties. The substantial roles of hydrogen bonding and π–π interactions in the assembly of the NCDPs have been validated through nuclear magnetic resonance (NMR), photophysical, and computational studies. Quantum chemical calculations at the ab initio, semiempirical, and density functional theory levels have been performed on model systems to understand the stabilities of the right (P‐) and left (M‐) handed helical supramolecular assemblies and the nature of the intermolecular interactions. This study emphasizes the role of CDP chiral auxiliaries on the solvent‐induced helical assembly and reversible chiroptical switching of naphthalenediimides.     

Dynamic output feedback consensus of continuous‐time networked multiagent systems

This article addresses the dynamic output feedback consensus problem of continuous‐time networked multiagent systems. Both a fixed topology and Markovian switching topologies are considered. The consensus algorithms are on the base of the output information of each agent's itself and its neighbors. Some sufficient conditions for consensus of multiagent systems are obtained in forms of bilinear matrix inequalities. The algorithm based on the homotopy continuation method is given to compute the feasible controller gains. Numerical simulations are given to show the effectiveness of the proposed results. © 2014 Wiley Periodicals, Inc. Complexity 20: 35–42, 2015