Ultra-stable Ni catalysts for methane reforming by carbon dioxide

Methane reforming by carbon dioxide has been studied over ultra-stable Ni catalysts. The catalyst was characterized by XRD, IR and TEM and temperature programmed hydrogenation. The nickel–magnesia solid solution catalyst containing low nickel has shown excellent stability (>3000 h) and no carbon deposition in the methane reforming by carbon dioxide. It was also found that the small nickel metal particle interaction with support surface is effective for the inhibition of carbon formation.     

A generalized equation describing isotope exchange kinetics at solid-liquid interface

A generalization of the kinetic equation for the isotope exchange at solid—liquid interface is presented. The generalized equation may be used to describe kinetics of the isotope exchange process limited by surface reactions and diffusion without assumption of spherical symmetry of solid particles.

---

Eine generalisierte Gleichung für die Kinetik des Isotopenaustausches an Fest-Flüssig-Phasengrenzen

Zusammenfassung Es wird eine generalisierte kinetische Gleichung angegeben, die die Kinetik des Isotopenaustausches an Fest-Flüssig-Phasengrenzen beschreibt, wobei der Austauschprozeß durch Oberflächenreaktionen und Diffusion ohne der Annahme sphärischer Symmetrie für die festen Partikel begrenzt ist.

     

8-羟基喹哪啶固相萃取光度法测定水样中的铁

研究了8-羟基喹哪啶与铁的显色反应，在pH为8．0的氯化氨-氨水缓冲介质中，在十六烷基三甲基溴化铵(CTMAB)存在下，8-羟基喹哪啶与铁反应生成3：1稳定的蓝紫色络合物，该络合物可被Waters Sep-Park-C18固相萃取小柱萃取，用乙醇洗脱后用光度法测定，络合物λmax=600nm。在此波长下其它金属离子的络合物无光吸收，对铁选择性很好，铁含量在0-5mg/L内符合比尔定律，方法用于水样中痕量铁的测定，结果令人满意。     

磁性纳米固体酸SO42--TiO2-Fe3O4催化剂的合成、表征及催化性能的研究

首先研究制备了Fe3O4和SO42--TiO2固体酸催化剂,在此基础上采用共沉淀和浸渍的方法制备了磁性和超细SO42--TiO2-Fe3O4固体酸催化剂。利用XRD,TEM和FT-IR等分析测试手段对催化剂的结构和性能进行了表征。测定结果证实该催化剂具有较小的粒度,较高的磁性表现。在乙酸丁酯合成反应中SO42--TiO2-Fe3O4展示了很高的催化活性(酯化率可达82.7%),而且利用Fe3O4的磁性可对催化剂进行分离和回收.     

Solid state extrusion of thermoplastic elastomers 4

A solid state extrusion technique is applied as to produce oriented block copoly(ether ester) under various physical conditions. The morphology of the extruded samples is characterized in relation to the extrusion parameters and hard segment compositions of the polymer, using thermal analysis and X-ray methods. The lateral dimensions of the crystalline domains are found to be approximately 150 Å depending on the extrusion conditions. The statistics of the long range periodicity of the structure along the extrusion direction is in agreement with a one-dimensional two phase model, the crystalline portion of which does not vary much in thickness (35 – 45 Å). The unexpected increase in the long period and the thermal shrinkage suggest the existence of strained interlamellar amorphous chains (tie molecules). The observed variations in tensile properties are interpreted under the assumption that both the number of such tie molecules and their fully extended lengths are determined by the hard segment composition and the extrusion conditions. It is also argued that the increase in the glass transition temperature is not only a function of the composition of hard segments in the amorphous phase but also of the number of strained tie molecules.Herrn Dr. Dr. h. c. H. Hellmann zum 70. Geburtstag gewidmet.Part 3 cf. lit [11]     

苯甲醛缩三乙烯四胺Schiff碱Co(Ⅱ)配合物固相合成及氧合性能研究

Three new cobalt complexes were synthesized by solid-state reaction at room temperature. It was found that one mole of complex reacted with two moles of oxygen at room temperature. And the oxygenated complexes [Co·(L₁)₂·2O₂](NO₃)₂·2H₂O (L₁=N,N′-bis(4-hydroxyl-3-methoxy-benzyl)-triethylenetetramine), [Co·(L₂)₂·2O₂](NO₃)₂ ·2H₂O (L₂=N,N′-bis(4-hydroxyl-benzyl)-triethylenetetramine) and [Co·L₃·2O₂](NO₃)₂·2H₂O (L₃=N,N′-bis(2-hydroxyl-benzyl)-triethylenetetramine) were obtained and characterized by elemental analysis, IR spectra, ¹H NMR, TG/DTA, UV-Vis and molar conductance. The coordinated oxygen contents in the oxygenated complex were also determined by weight method. It was found that one O₂ molecule coordinated to the Co ion and formed superoxo type oxygenated complex.     

Non isothermal heat capacities and chemical reactions using a modulated DSC

An evaluation of measurements of heat capacities by modulated differential scanning calorimetry, MDSC is presented. Heat capacities were obtained from 130 to 550 K by a non isothermal technique in which a periodic modulation was added to the linear heating rate. Effects of amplitude and period of modulation, sample weight, sample type, pan type, and cell imbalance are described. Results are compared with those obtained using the isothermal technique. Heat capacity could be measured well into the decomposition region and separated from the non reversing signal due to chemical reaction (degradation), thus allowing a precise detection of onsets of the thermal degradation. This additional information will aid in the interpretation of the degradation chemistry, a field vital for the petroleum-industry.Dedicated to Professor Bernhard Wunderlich on the occasion of his 65th birthdayPart of this paper was presented at the 23rd Conference of the North American Thermal Analysis Society, Toronto, Canada, September 25–28, 1994.The author (MVN) acknowledges the experimental assistance provided by J. Balogh of Exxon Research and Engineering Company, Linden. Helpful discussions with A. Boller of the University of Tennessee at Knoxville, Dr. Y. Jin, General Electrical, and Dr. S. Sauerbrunn formerly of TA Instruments are also acknowledged.     

Diels-Alder reaction volumes in the solid state and solution

The densities of anthracene, tetracyanoethylene, maleic anhydride, N-phenylmaleineimide, trans, trans-1,4-diphenylbuta-1,3-diene, and their Diels-Alder adducts were measured in the solid state and in solution at 25 °C. The reaction volumes in the solid state were calculated from the difference in molar volumes. They turned out to be low, close to each other (–4 to –11 cm³ mol^–1), and slightly different from the reaction volumes (–8±1 cm³ mol^–1) calculated from the van der Waals radii. The reaction volumes in solutions (–15 to –32 cm³ mol^–1) were found from the difference in partial molar volumes of the reactants in dioxane, acetonitrile, and 1,2-dichloroethane, The experimental Diels-Alder reaction volumes in solution are determined not only by the formation of new bonds in an adduct: a considerably higher contribution (to 75%) is made by a change in the volume of intermolecular empty spaces in solution on going from reactants to adducts.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2386–2390, November, 2004.     

ICP-AES detection of silicon carbide impurities volatilized in a graphite furnace with the use of carbon tetrachloride vapour

The analytical capability of high-temperature halogenation with carbon tetrachloride vapour in a graphite furnace was investigated for silicon carbide powder with known chemical composition and particle size. Intensity vs heating time curves were determined for analytical lines of Al, B, Ba, Ca, Cr, Cu, Fe, Mg, Mn, Ti, V and Si constituents, volatilized with and without the presence of CCl₄ vapour in the furnace atmosphere. Igniting 10 mg SiC at 2100 °C for 60 s in chlorinating atmosphere, the evaporated fraction of most of the constituents was higher than 90% (for Al about 50%). The line intensity vs sample mass (4–26 mg) relationships were linear for all impurities studied, while the intensity of silicon line showed a relatively small change with the sample mass. BEC (background equivalent concentration) values for this solid sampling technique (10 mg loaded sample) were 2–20 fold lower than those calculated for the conventional solution sample introduction method.     

Ce0.6Zr0.35Y0.05O2和Pr0.6Zr0.35Y0.05O2催化剂表面上CO氧化和18O-16O交换反应的研究

测定了在Ce0.6Zr0.4O2,Ce0.6Zr0.35Y0.05O2,Pr0.6Zr0.4O2和Pr0.6Zr0.35Y0.05O2 (分别表示为CZ,CYZ,PZ和PYZ)样品表面上的CO氧化反应和18O-16O 同位素交换反应.结果表明: 在CZ和PZ系列固熔中掺杂Y3 离子可以改善晶格氧的迁移速度;PZ和PZY的晶格氧比CZ 和CZY 的晶格氧具有更高的氧化反应活性.其原因是将Y3 掺杂到Ce0.6Zr0.4O2 或Pr0.6Zr0.4O2晶格中,增加了样品的氧空位浓度,从而提高了晶格氧的迁移性质,而PrOx比CeO2具有更低温度的氧化还原性质,因此PZ和PZY的晶格氧比CZ 和CZY 的晶格氧具有更高的氧化反应活性.