A fed-batch culture system with constant feeding (glucose 80 g L−1, 0.25 ml min−1) was used to study the influence of glucose on cell dry weight and exopolysaccharides production from submerged Tremella fuciformis spores in a 5-L stirred-tank bioreactor. The results showed that high levels of cell mass (9.80 g L−1) and exopolysaccharides production (3.12 g L−1) in fed-batch fermentation were obtained after 1 h of feeding, where the specific growth rate (μ) and exopolysaccharides yield on substrate consumed (YP/S) were 0.267 d−1 and 0.14 g g−1. Unlike batch fermentation, maximal cell mass and exopolysaccharides production merely reached 7.11 and 2.08 g L−1; the specific growth rate (μ) and exopolysaccharides yield on substrate consumed (YP/S) were 0.194 d−1 and 0.093 g g−1, respectively. It is concluded that the synthesis of exopolysaccharides can be promoted effectively when feeding glucose
at a late exponential phase. 相似文献
The direct electrochemistry of glucose oxidase (GOD) was achieved based on the immobilization of GOD on a natural nano‐structural attapulgite (ATP) clay film modified glassy carbon (GC) electrode. The immobilized GOD displayed a pair of well‐defined quasi‐reversible redox peaks with a formal potential (E0′) of ?457.5 mV (vs. SCE) in 0.1 mol·L?1 pH 7.0 phosphate buffer solution. The peak current was linearly dependent on the scan rate, indicating that the direct electrochemistry of GOD in that case was a surface‐controlled process. The immobilized glucose oxidase could retain bioactivity and catalyze the oxidation of glucose in the presence of ferrocene monocarboxylic acid (FMCA) as a mediator with the apparent Michaelis‐Menten constant Kappm of 1.16 mmol·L?1. The electrocatalytic response showed a linear dependence on the glucose concentration ranging widely from 5.0×10?6 to 6.0×10?4 mol·L?1 (with correlation coefficient of 0.9960). This work demonstrated that the nano‐structural attapulgite clay was a good candidate material for the direct electrochemistry of the redox‐active enzyme and the construction of the related enzyme biosensors. The proposed biosensors were applied to determine the glucose in blood and urine samples with satisfactory results. 相似文献
An amperometric glucose biosensor was developed based on the immobilization of glucose oxidase in the organically modified
silicate (ormosil)-polyvinyl acetate (PVA) matrix onto a Prussian Blue (PB)-modified glassy carbon electrode. A higher stability
PB-modified electrode was prepared by the electrochemical deposition of FeCl3, K3[Fe(CN)6] and ethylenediamine tetraacetic acid (EDTA) under cyclic voltammetric (CV) conditions. The effects of the potential range
of CV conditions, electrolyte cations, applied potential, pH, temperature and co-existing substances were investigated. The
detection limit of the glucose biosensor was 8.1 μmol·L−1 (S/N = 3) with a linear range from 20 μmol·L−1 to 2 mmol·L−1 (R = 0.9965). The biosensor presented a fast response and good selectivity. Additionally, excellent reproducibility and stability
of the biosensor were observed.
Supported by the National High Technical Development Project (863 project) Foundation (Grant No. 2006AA09Z160) and the National
Natural Science Foundation of China (Grant No. 20775064) 相似文献
Enzymes are versatile biocatalysts and find increasing applications in many areas. The major advantages of using enzymes in biocatalytic transformations are their chemo‐, regio‐, and stereospecificity, as well as the mild reaction conditions that can be used. However, even when an enzyme is identified as being useful for a given reaction, its application is often hampered by its lack of long‐term stability under process conditions, and also by difficulties in recovery and recycling. For ease of application and stabilization purposes, enzymes are often immobilized on solid supports. Among support matrices, hydrophobic biomaterials have been extensively used as supports for enzyme immobilization because the hydrophobic interactions not only can effectively increase the amount of enzyme immobilization, but also exhibit higher activity and retention of activity compared with hydrophilic supports. On the other hand, polysiloxane can evidently increase the amount of enzyme immobilization because of its hydrophobicity and strong affinity with enzyme. Therefore, this research details the first preparation and use of a hydrophobic polysiloxane support for enzyme immobilization in which the structural and functional characteristics of new supports have been investigated by using glucose oxidase (GOD) and a simple Fenton's assay method, and extremely interesting features were revealed. The results showed that the amount of GOD immobilization and the stability of GOD loaded, which are fundamental properties for enzyme separation and purification, can be significantly improved by adsorption. Moreover, the results indicated that hydrophobic polysiloxane supports can effectively increase the enzymatic affinity and durability of GOD, and decrease the rate of GOD desorbed.
In this study, 2-acrylamidophenylboronate (2-APB) was synthesised and its ability to bind with glucose was investigated both in solution and when integrated into a holographic sensor. Multiple forms of 2-APB, resulting from the neighbouring effect of the amido group with the boronic acid through an intramolecular B--O-coordinated interaction, were shown to exist in solution by using multinuclear NMR spectrometry. It was found that 2-APB predominantly adopts a zwitterionic tetrahedral form at physiological pH values. The complex formation of 2-APB with glucose and lactate was investigated in DMSO; 2-APB favours binding with glucose rather than lactate and generates a five-membered-ring complex. Furthermore, a 2-APB-based holographic sensor displayed a significant response to glucose with little interference from lactate, and with no dependence on pH in the physiological pH range. These features suggest that the new ligand 2-APB is a potential candidate for the development of glucose-selective sensors. 相似文献
