基于芬顿反应和硫磺素T构建免标记荧光传感器用于葡萄糖的检测

基于芬顿反应和硫磺素T(ThT)构建新奇的免标记荧光传感器用于葡萄糖的检测。当无葡萄糖存在时,ThT诱导富G-DNA探针形成G-四链体/ThT复合物,ThT的荧光强度显著增强;当葡萄糖存在时,葡萄糖氧化酶催化葡萄糖产生H2 O2,在Fe^2+催化的芬顿反应作用下,H2 O2转化为羟基自由基(·OH),·OH引发DNA的氧化损伤导致富G-DNA探针裂解为短寡核苷酸片段而丧失形成G-四链体/ThT的能力,ThT的荧光强度显著降低,从而实现对葡萄糖的检测。在优化的检测条件下,G-四链体/ThT荧光强度变化和葡萄糖浓度在0.5~45μmol/L的范围内呈现较好的线性关系(R^2=0.99268),检出限为0.1μmol/L。利用本法对葡萄糖加标的血液样品进行分析,葡萄糖的回收率为90.7%~118.3%,相对标准偏差为1.7%~5.8%,方法可用于血糖检测。     

红珍珠降糖胶囊中微量元素营养研究

红珍珠降糖胶囊是具有显著降低血糖水平,确定糖尿病患者康复的绿色营养保健食品。通过红珍珠降糖胶囊中Cr、Mn、Cu、Zn、Mg等微量元素的分析测试以及与青海小麦、膳食日摄取量等对比研究,表明红珍珠降糖胶囊富含涉及糖尿病的微量元素,在降低血粮糖水平方面具有十分重要的营养学、功效学作用和意义。     

Development of an amperometric glucose biosensor based on the immobilization of glucose oxidase in an ormosil-PVA matrix onto a Prussian Blue modified electrode

An amperometric glucose biosensor was developed based on the immobilization of glucose oxidase in the organically modified silicate (ormosil)-polyvinyl acetate (PVA) matrix onto a Prussian Blue (PB)-modified glassy carbon electrode. A higher stability PB-modified electrode was prepared by the electrochemical deposition of FeCl₃, K₃[Fe(CN)₆] and ethylenediamine tetraacetic acid (EDTA) under cyclic voltammetric (CV) conditions. The effects of the potential range of CV conditions, electrolyte cations, applied potential, pH, temperature and co-existing substances were investigated. The detection limit of the glucose biosensor was 8.1 μmol·L⁻¹ (S/N = 3) with a linear range from 20 μmol·L⁻¹ to 2 mmol·L⁻¹ (R = 0.9965). The biosensor presented a fast response and good selectivity. Additionally, excellent reproducibility and stability of the biosensor were observed. Supported by the National High Technical Development Project (863 project) Foundation (Grant No. 2006AA09Z160) and the National Natural Science Foundation of China (Grant No. 20775064)     

两种功能化纳米金粒子固酶电极的催化性能

以合成的4-巯基苯甲酸功能化纳米金粒子和聚乙烯基吡啶包覆纳米金粒子分别作为固酶载体,制备了2种新型固酶电极,在此基础上组装了2种酶燃料电池。采用电化学方法结合紫外可见分光光度法、透射电镜技术等手段研究了固酶载体的形貌,酶-载体间相互作用对电极表面固定酶分子的光谱学性质,酶-电极间直接电子迁移能力和催化底物反应性能的影响,进一步评估和比较了两种酶燃料电池的能量输出性能。实验结果表明：4-巯基苯甲酸功能化纳米金粒子固酶基电极可以实现酶-电极间的直接电子迁移而且对葡萄糖和氧气具有良好的催化性能(催化反应起始电位分别为-0.03和0.96 V,底物转化频率分别是1.3和0.5 s^-1),其催化性能的重现性、长期使用性能、酸碱耐受性和热稳定性良好,随着自组装固酶层数的增加,催化性能随之增强直至达到极限催化电流;电池性能测试结果表明4-巯基苯甲酸功能化纳米金粒子固酶基燃料电池的开路电压为0.88 V,最大输出能量密度：864.0 μW·cm^-2,长期使用性能优异(储存3 周后仍可达到最佳能量输出的80%以上)。     

铂修饰超细纤维聚苯胺在葡萄糖生物传感方面的应用

在不锈钢电极(SS)表面制得超细纤维状聚苯胺(superfine-fibrous PANI),经Pt微粒修饰后得到Pt微粒超细纤维聚苯胺复合电极[Pt／(superfine-fibrous PANI)／SS]。结果表明,直径50-100nm的Pt微粒均匀分布于直径约100nm的聚苯胺纤维上;Pt／(superfine-fibrous PANI)／SS电极对H2O2氧化具有很好的电催化活性。采用脉冲电流法(PGM)再将葡萄糖氧化酶(GOD)与间苯二胺(MPD)混合共聚嵌于Pt／(superilnefibrous PANI)／SS电极表面,获得了具有优异生物电化学传感特性的葡萄糖氧化酶电极。该酶电极最大响应电流密度im=917．4μA／cm^2,米氏常数K=9．339mmol／L;酶电极对葡萄糖响应快,对尿酸和抗坏血酸有很好的抗干扰性能。     

N‐glycosylation approach to glucose‐functionalized diamine and its use for protection‐free synthesis of polyurea bearing glucoside pendant

A glucose‐functionalized diamine was prepared and used as a new monomer for polyurea synthesis. The diamine was prepared by N‐glycosylation of 1,6‐hexamethylenediamine with D ‐glucose. Upon adding diisocyanates to the diamine, isocyanate reacted selectively with the amino groups, not with the hydroxyl groups of the glucose‐derived structure, to give the corresponding polyureas. The polyureas exhibited highly hydrophilic nature due to the presence of the glucose‐derived side chain. A ternary system consisting of the glucose‐functionalized diamine, piperazine, and diisocyanate gave the corresponding polyureas, where content of the glucose‐derived moiety was tunable by feed ratio between the diamine and piperazine. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

A sensitive, rapid ferricyanide-mediated toxicity bioassay developed using Escherichia coli

A need for rapid toxicity techniques has seen recent research into developing new microbiological assays and characterising their toxicity responses using a range of substances. A microbiological bioassay that determines changes in ferricyanide-mediated respiration for toxicity measurement (FM-TOX) shows particular promise. The development and optimisation of an improved FM-TOX method, incorporating novel features, is described using Escherichia coli as the biocatalyst. Omission of an exogenous carbon source, used in previously described FM-TOX assays, substantially improves the assay sensitivity. In addition, the development of a two-step procedure (toxicant exposure followed by determination of microbial respiratory activity) was found to enhance the inhibition of E. coli by 3,5-dichlorophenol and four other toxicants, compared to single-step procedures. Other assay parameters, such as the ferricyanide concentration, exposure times and optical density of the biocatalyst were also optimised, sometimes based on practical aspects. Toxicity tests were carried out using the adopted technique on both organic and inorganic toxicants, with classic sigmoid-shaped dose-response curves observed, as well as some non-standard responses. IC₅₀ data is presented for a number of common toxicants. The optimised assay provides a good foundation for further toxicity testing using E. coli, as well as the potential for expanding the technique to utilise other bacteria with complementary toxicity responses, thereby allowing use of the assay in a range of applications.     

Instrumental Requirements for Non-Invasive Blood Glucose Measurement Using NIR Spectroscopy

The magnitude of spectral change in blood glucose measurements with diffuse reflectance spectroscopy is investigated. Spectral change is estimated by simulation of light propagation in skin tissue and measurements of absorbance spectra of aqueous glucose solution. Required sensitivity of spectrophotometers for monitoring change in the blood glucose concentration as small as 10 mg/dL has been obtained using the estimated change in the absorbance spectrum and mean pathlength of light in tissue.