Synthesis,characterization, and stability of carbodiimide groups in carbodiimide‐functionalized latex dispersions and films

Cyclohexylcarbodiimidoethyl methacrylate (CCEMA) and t‐butylcarbodiimidoethyl methacrylate (t‐BCEMA) were prepared in a two‐step synthesis. These monomers were then used to prepare carbodiimide‐functionalized PBMA and PEHMA latex particles, employing two‐stage emulsion polymerization, with the carbodiimide–methacrylate monomers being introduced only in the second stage under monomer‐starved conditions. During emulsion polymerization, the carbodiimide moiety ( NCN ) was found to be unstable at pH 4, but stable when the pH of the dispersion was increased to 8, using NaHCO₃ as the buffer. Survival of  NCN group against hydrolysis during the polymerization, and during storage in the dispersion, was enhanced by using EHMA as the comonomer (more hydrophobic) and the t‐butyl carbodiimide derivative. The t‐butyl group provides more steric hindrance to the hydrolysis reaction. A decrease in the reaction temperature from 80°C to 60°C was also found to increase the extent of  NCN group incorporation during emulsion polymerization. Under ideal conditions, more than 98% of the  NCN groups in the monomer feed are successfully incorporated into the latex. When these latex particles are mixed with a  COOH containing latex and allowed to dry, polymer diffusion leading to crosslinking occurs. Films annealed at 60°C reach a gel content of 60% in 10 h. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 855–869, 2000     

A solvent‐free method for the synthesis of block copolymers with fluorinated pendant groups by a hydrosilylation reaction

A solvent‐free method for the hydrosilylation of pendant double bonds in block copolymers is reported in this article. An anionically prepared block copolymer, poly(styrene‐b‐1,2‐butadiene), was heated with 1H,1H,2H,2H‐perfluorooctyldimethylhydrosilane in the presence of a nonacidic platinum catalyst for 24–26 h to obtain a quantitatively hydrosilylated block copolymer. Gel permeation chromatography, IR, and thermogravimetric analysis were used to characterize the block copolymers obtained. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1179–1183, 2000     

动力学分析法研究生物反应活性中间体及其相关反应

评述了动力学分析法研究生物反应活性中间体的意义，存在的困难，研究方法及近年来 一多学科交叉与渗透领域的研究进展。     

镶炭泡塑对阴离子表面活性剂吸附性能的研究

提出了用镶炭泡塑处理含阴离子表面活性剂的废水，并通过实验证实，经活化的泡塑对ＬＡＳ有明显的富集作用，且发现将活化过的活性炭填镶进去，可形成具有复合功能的处理剂，对含ＬＡＳ废水的处理效果更佳。     

酞菁锰-表面活性剂薄膜电极的电化学表征及其对三氯乙酸的电化学催化作用的研究

将酞菁锰（ＭｎＰｃ）掺入阳离子表面活性剂双十二烷基二甲基溴化铵（ＤＤＡＢ）的氯仿溶液，并涂布于热解石墨电极表面，待氯仿挥发后即制得ＭｎＰｃ－ＤＤＡＢ薄膜电极。循环伏安实验表明，在ＫＢｒ溶液中，该薄膜电极有两对还原氧化峰，第一对峰的Ｅｐｃ１＝－０．２７Ｖ，Ｅｐａ１＝０．０１Ｖ；第二对峰的Ｅｐｃ２＝－０．７６Ｖ，Ｅｐａ２＝－０．６２Ｖ（ｖｓ．ＳＣＥ）。本文着重探讨了第二对峰的电化学行为，估计了该体系的电荷传递扩散系数Ｄｃｔ和表观非均相电极反应速率常数Ｋ０′等电化学参数，并可将该薄膜电极用于催化三氯乙酸的电化学还原。     

On the Scaling Study for the A_f-A_g Type Free Radical Polymerization

根据Ａｆ－Ａｇ自由基加聚反应的数量分布函数，导出凝胶点附近的渐进分布函数和高分子矩的表示式．进一步应用标度变换，得到了描述溶胶－凝胶相变的广义标度律，从而揭示了Ａｆ－Ａｇ自由基加聚的固化反应是一个相变过程．     

Structural investigations of carrageenan–surfactant systems by synchrotron X‐ray scattering

Small‐angle X‐ray scattering by means of synchrotron radiation was used to study the interaction of κ‐ and ι‐carrageenan of different molar mass in the presence of the gel‐inducing ions, K⁺, with the ionic surfactants cetylpyridinium chloride (CPC) and dodecylpyridinium chloride (DPC). This interaction resulted in a more or less complete shrinking of the gel and in the formation of ordered periodic structures of the surfactant in conjunction with the carrageenan molecules. The influence of the polymer concentration for a given surfactant concentration, the content of surfactant for the same concentration of the polysaccharide, the molar mass, and the linear charge density of the polymer were all investigated. Decreasing the length of the alkyl chain of the surfactant, increasing the charge density of the polymer chain, and increasing the polymer concentration for the samples explored improved the ordering in the carrageenan–surfactant complexes. The structures of the κ‐carrageenan–CPC complexes were investigated as a function of temperature during reversible heating–cooling cycles, and it was shown that the addition of the surfactant lead to a more pronounced temperature stability of polymer network. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2851–2859, 2000     

Kinetic study of free‐radical polymerization photoinitiated by cyanine‐borate salts. II.

A series of cyanine butyltriphenylborate salts were prepared and tested as initiators of free‐radical polymerization photoinitiated via a photoinduced electron‐transfer process. For the majority of the tested series, the highest rate of photoinitiated free‐radical polymerization was observed when sec‐butyl radicals were formed. Essentially, there was no influence of the quantum yield of the free‐radical formation on the rate of the free‐radical polymerization initiated by the cyanine‐borate salts. The experimental data revealed that the relationship between the rate of polymerization and the free energy change for the electron transfer displayed typical Marcus region kinetic behavior. The photoreduction of the cyanine butyltriphenylborate salts produced colorless products. The efficiency of the bleached‐dye formation had no effect on the overall efficiency of photoinitiated polymerization. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2365–2374, 2000     

“Continuous” emulsifier‐free emulsion polymerization for the synthesis of monodisperse polymeric latex particles

A “continuous” emulsifier‐free emulsion copolymerization (CEFEP) of styrene and divinylbenzene (DVB) or methyl methacrylate (MMA) and ethylene glycol dimethacrylate (EGDMA) has been devised to produce uniform polymeric microspheres of narrow size distribution from 74 nm to 2 μm, depending on reaction time. Monomer and crosslinker vapors were fed continuously into a small reactor. We suggest that after initial nucleation, subsequent CEFEP proceeds near the surfaces of growing particles in a monomer‐swollen outer shell. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3181–3187, 2000     

Synthesis of poly(chloromethylstyrene‐b‐styrene) block copolymers by controlled free‐radical polymerization

The controlled free‐radical polymerization of styrene and chloromethylstyrene monomers in the presence of 2,2,6,6‐tetramethyl‐1‐piperidinyloxyl (TEMPO) has been studied with the aim of synthesizing block copolymers with well‐defined structures. First, TEMPO‐capped poly(chloromethylstyrene) was prepared. Among several initiating systems [self‐initiation, dicumyl peroxide, and 2,2′‐azobis(isobutyronitrile)], the last offered the best compromise for obtaining a good control of the polymerization and a fast polymerization rate. The rate of the TEMPO‐mediated polymerization of chloromethylstyrene was independent of the initial concentration of TEMPO but unexpectedly higher than the rate of the thermal self‐initiated polymerization of chloromethylstyrene. Transfer reactions to the chloromethyl groups were thought to play an important role in the polymerization kinetics and the polydispersity index of the resulting poly(chloromethylstyrene). Second, this first block was used as a macroinitiator in the polymerization of styrene to obtain the desired poly(chloromethylstyrene‐b‐styrene) block copolymer. The kinetic modeling of the block copolymerization was in good agreement with experimental data. The block copolymers obtained in this work exhibited a low polydispersity index (weight‐average molecular weight/number‐average molecular weight < 1.5) and could be chemically modified with nucleophilic substitution reactions on the benzylic site, opening the way to a great variety of architectures. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3845–3854, 2000