DHP促进[Ru(bpy)_3]~(2+)介导鸟嘌呤的氧化

应用循环伏安法和微分脉冲伏安法研究了ITO电极上双十六烷基磷酸盐(DHP)和多壁碳纳米管(MWNTs)对[Ru(bpy)3]2+(bpy=2,2′-联吡啶)介导鸟嘌呤氧化的影响.结果表明,[Ru(bpy)3]2+能够介导鸟嘌呤氧化.在0.01至0.15 mmol.L-1DHP浓度范围内,[Ru(bpy)3]2+介导鸟嘌呤氧化峰电流随DHP浓度的增大而增大,阳离子表面活性剂HTAC则起抑制作用.讨论了DHP参与[Ru(bpy)3]2+介导鸟嘌呤氧化的可能电极过程机理.     

Zinc chloride catalyzed synthesis of 5-substituted 1H-tetrazoles under solvent free condition

Zinc chloride is an efficient and safe catalyst in the[3 + 2]cycloaddition reaction of organic nitriles with sodium azide in solventless condition.The corresponding S-substituted 1H tetrazoles were obtained under mild conditions.This method can overcome disadvantages such as:the use of toxic metals and expensive reagents,drastic reaction conditions,water sensitivity and the presence of dangerous hydrazoic acid.     

Segregation phenomena in micelles from mixtures of fluorinated and hydrogenated surfactants

Mixtures of hydrogenated and fluorinated surfactants are known to form either mixed or segregated micelles: the conclusions are much dependant on the precision of the experimental measurements and on the model used for interpretation. Recently, mixed surfactant solutions were probed at the micellar or molecular level by SANS, fluorescence or NMR. It leads to an intermediate structure for the mixed micelles with an intramicellar segregation of the fluorinated and hydrogenated surfactant.This intramicellar segregation was also observed in a variety of more complex systems which are rapidly surveyed in the second part.     

Capillary waveguide fluoroimmunosensor with improved repeatability and detection sensitivity

An optical capillary waveguide fluoroimmunosensor based on glass capillaries internally coated with an ultrathin poly(dimethylsiloxane) (PDMS) film is presented. The evaluation of the capillaries developed was done in comparison with aminosilanized [3-(aminopropyl)triethoxysilane, APTES] glass and poly(methylpentene) (PMP) capillaries by immobilizing rabbit γ-globulins on the internal capillary wall. Following reaction with (R)-phycoerythrin-labelled antibody, the capillary was scanned with a laser beam and the fluorescence waveguided through the capillary wall was detected by a photomultiplier placed at one of its ends. The capillaries developed provided considerably improved protein coating homogeneity (intracapillary coefficients of variation 2.9–6.6%) and repeatability (intercapillary coefficients of variation 2.1–5.0%) compared with APTES-treated ones (7.9–13.4 and 8.5–15.2%, respectively). With use of these capillaries in a sandwich-type immunosensor for the determination of rabbit γ-globulins, the assay detection limit was improved eightfold (4.4 ng/mL) compared with that obtained using PMP capillaries (35.3 ng/mL), whereas the assay repeatability was improved threefold (intra-assay coefficients of variation 5.9–13.1%) compared with APTES-treated capillaries (15.6–36%). Optoelectronic set-up used to scan the capillaries (left) and representative fluorescence scannings of dual-band poly(methylpentene) (PMP), PDMS-modified glass and APTES treated glass capillaries     

Miscibility of sodium chloride and sodium dodecyl sulfate in the adsorbed film and aggregate

The adsorption, micelle formation, and salting out of sodium dodecyl sulfate in the presence of sodium chloride were studied from the viewpoint of their mixed adsorption and aggregate formation. The surface tension of aqueous solutions of a sodium chloride–sodium dodecyl sulfate mixture was measured as a function of the total molality and composition of the mixture. Phase diagrams of adsorption and aggregate formation were obtained by applying thermodynamic equations to the surface tension. Judging from the phase diagrams, sodium chloride and sodium dodecyl sulfate are miscible in the adsorbed film at very large composition of sodium chloride and in the salted-out crystalline particle, while they are immiscible in the micelle. The miscibilities in the adsorbed film, micelle, and crystalline particle increase in the following order: particle > adsorbed film > micelle. The difference in miscibility among the oriented states was ascribed to the difference in geometry between the adsorbed film and micelle and to the interaction between bilayer surfaces in the particle.     

阴离子表面活性剂在油水界面聚集的分子动力学模拟

用分子动力学方法模拟了油、水和阴离子表面活性剂组成的混合溶液从初始“均相”到“油水两相”分离的动力学过程, 研究了十二烷基苯磺酸钠(SDBS)在界面分离过程中的作用. 模拟发现, 油水两相能够在短时间内分离达到平衡, 形成一个明显的油水界面; 在SDBS存在情况下, 油水界面的分离时间随着SDBS浓度的增加逐渐增加, 达到平衡时SDBS会在界面处形成一个明显的界面膜, 并对油水界面处的水分子有限制作用. 模拟表明, 分子动力学方法可以作为实验的一种补充, 为实验提供必要的微观分子结构信息.     

Spectrophotometric study of interaction and solubilization of procaine hydrochloride in micellar systems

The interaction of Procaine hydrochloride (PC) with cationic, anionic and non-ionic surfactants; cetyltrimethylammonium bromide (CTAB), sodium dodecyl sulfate (SDS) and triton X-100, were investigated. The effect of ionic and non-ionic micelles on solubilization of Procaine in aqueous micellar solution of SDS, CTAB and triton X-100 were studied at pH 6.8 and 29°C using absorption spectrophotometry. By using pseudo-phase model, the partition coefficient between the bulk water and micelles, K_x, was calculated. The results showed that the micelles of CTAB enhanced the solubility of Procaine higher than SDS micelles (K_x = 96 and 166 for SDS and CTAB micelles, respectively) but triton X-100 did not enhanced the solubility of drug because of weak interaction with Procaine. From the resulting binding constant for Procaine-ionic surfactants interactions (K_b = 175 and 128 for SDS and CTAB surfactants, respectively), it was concluded that both electrostatic and hydrophobic interactions affect the interaction of surfactants with cationic procaine. Electrostatic interactions have a great role in the binding and consequently distribution of Procaine in micelle/water phases. These interactions for anionic surfactant (SDS) are higher than for cationic surfactant (CTAB). Gibbs free energy of binding and distribution of procaine between the bulk water and studied surfactant micelles were calculated.      

Fluorescent Polyurethane Nanocapsules Prepared via Inverse Miniemulsion: Surface Functionalization for Use as Biocarriers

The functionalization of well‐defined PU nanocapsules with an aqueous core prepared by performing a polyaddition at the interface of inverse (water‐in‐oil) miniemulsion droplets is demonstrated. The miniemulsion technique involving the nanoreactor concept allows one to obtain an encapsulation efficiency as high as 90% within the nanocapsules. A pH independent fluorescent dye is used as a model system for the aqueous core. By varying the molar ratio of the diol to the diisocyanate at a fixed surfactant concentration, the shell thickness of the nanocapsules can be finely tuned. The carboxy‐ and amino‐functionalized surface of the nanocapsules can be tailored by an in‐situ carboxymethylation reaction and by physical adsorption of a cationic polyelectrolyte, i.e. PAEMA or PEI. The increased uptake of amino‐functionalized fluorescent nanocapsules by HeLa cells clearly demonstrates the potential of the functionalized nanocapsules to be successfully exploited as biocarriers.

     

Real Time Electrochemical Monitoring of DNA/PNA Dissociation by Melting Curve Analysis

An immobilization‐free electrochemical method is reported for real‐time monitoring of the DNA hybrid dissociation between a ferrocene labeled peptide nucleic acid (PNA) and a fully‐complementary or single‐base‐mismatched DNA. This method takes advantages of electrostatic charge characteristics and interactions among the neutrally charged PNA, the negatively charged DNA and the negatively charged electrode surface made of indium tin oxide (ITO). When a ferrocene labeled PNA (Fc‐PNA) sequence is hybridized to a complementary DNA strand, electrostatic repulsion between the negatively charged PNA/DNA hybrid and the negative ITO surface retards the diffusion of the electroactive Fc to the electrode, resulting in a much reduced electrochemical signal. On the other hand, when the Fc‐PNA is dissociated from the hybrid at elevated temperatures, the neutrally charged Fc‐PNA easily diffuses to the electrode with an enhanced electrochemical signal. Therefore, an electrochemical melting curve of the Fc‐PNA/DNA hybrid can be obtained by measuring the Fc signal with the increasing temperature. This strategy allows monitoring of the dissociation of the DNA hybrid in real time, which might lead to a simple detection method for single nucleotide polymorphism (SNP) analysis.