基于VOF方法的带相变的自由界面的计算

对于气液自由界面上存在相变(蒸发、沸腾或凝结)的情况,由于此时不仅物性分布是不连续的,速度场也发生了不连续,这无论对于捕捉或追踪自由界面的算法本身还是流场的求解都带来了一定的困难.本文提出一种基于VOF方法的计算带相变的自由界面的算法,对这种情况下的关键问题一速度场的不连续性给出了解决方法.并用编制的二维程序计算了水平壁面上的膜态沸腾,并将计算结果与理论公式进行了比较.     

虚拟原子探针随机采样法用于氨基酸结构描述及其构效关系研究

考虑药物与蛋白质受体的3类非键作用模式, 利用8类虚拟原子探针和Monte Carlo随机采样技术, 得到了一套新的氨基酸侧链表面静电、立体及疏水势能场(ASSPF)参数. 在此基础上对苦味二肽和血管舒缓激五肽进行了结构表征和QSAR研究, 所建模型复相关系数R2和留一法交互检验复相关系数QLOOCV2分别为0.8457, 0.851和0.7688, 0.7952, 同时分析了肽链不同位置上氨基酸侧链对活性的影响, 取得较好的结果.     

新型聚乙烯接枝共聚物的制备与表征

以聚氧乙烯和全氟辛基聚氧乙烯醚(FPEOE)为起始原料, 合成了一系列的特种氟表面活性剂及其丙烯酸酯, 用FTIR和1H NMR对其结构进行了表征, 用最大气泡法测定了其表面张力. 以其作为接枝单体, 利用反应挤出接枝的方法制备了系列功能化聚乙烯, 用FTIR确定了接枝共聚物的结构和接枝率; 用DSC、接触角测量仪和XPS对接枝共聚物的热性能、结晶行为和表面性能进行了测试分析. 结果表明, 随着聚氧乙烯分子量的增加, 氟表面活性剂的表面活性降低; 聚乙烯接枝共聚物的结晶温度高于线形低密度聚乙烯, 且具有较好的亲水性.     

Silver Nanowires and Silanes in Hybrid Functionalization of Aramid Fabrics

New functionalization methods of meta- and para-aramid fabrics with silver nanowires (AgNWs) and two silanes (3-aminopropyltriethoxysilane (APTES)) and diethoxydimethylsilane (DEDMS) were developed: a one-step method (mixture) with AgNWs dispersed in the silane mixture and a two-step method (layer-by-layer) in which the silanes mixture was applied to the previously deposited AgNWs layer. The fabrics were pre-treated in a low-pressure air radio frequency (RF) plasma and subsequently coated with polydopamine. The modified fabrics acquired hydrophobic properties (contact angle Θ_W of 112–125°). The surface free energy for both modified fabrics was approximately 29 mJ/m², while for reference, meta- and para-aramid fabrics have a free energy of 53 mJ/m² and 40 mJ/m², respectively. The electrical surface resistance (R_s) was on the order of 10² Ω and 10⁴ Ω for the two-step and one-step method, respectively. The electrical volume resistance (R_v) for both modified fabrics was on the order of 10² Ω. After UV irradiation, the Rs did not change for the two-step method, and for the one-step method, it increased to the order of 10¹⁰ Ω. The specific strength values were higher by 71% and 63% for the meta-aramid fabric and by 102% and 110% for the para-aramid fabric for the two-step and one-step method, respectively, compared to the unmodified fabrics after UV radiation.     

Significant Enhancement of the Capacity and Cycling Stability of Lithium-Rich Manganese-Based Layered Cathode Materials via Molybdenum Surface Modification

Lithium-rich manganese-based layered cathode materials are considered to be one of the best options for next-generation lithium-ion batteries, owing to their ultra-high specific capacity (>250 mAh·g⁻¹) and platform voltage. However, their poor cycling stability, caused by the release of lattice oxygen as well as the electrode/electrolyte side reactions accompanying complex phase transformation, makes it difficult to use this material in practical applications. In this work, we suggest a molybdenum surface modification strategy to improve the electrochemical performance of Li_1.2Mn_0.54Ni_0.13Co_0.13O₂. The Mo-modified Li_1.2Mn_0.54Ni_0.13Co_0.13O₂ material exhibits an enhanced discharge specific capacity of up to 290.5 mAh·g⁻¹ (20 mA·g⁻¹) and a capacity retention rate of 82% (300 cycles at 200 mA·g⁻¹), compared with 261.2 mAh·g⁻¹ and a 70% retention rate for the material without Mo modification. The significantly enhanced performance of the modified material can be ascribed to the formation of a Mo-compound-involved nanolayer on the surface of the materials, which effectively lessens the electrolyte corrosion of the cathode, as well as the activation of Mo⁶⁺ towards Ni²⁺/Ni⁴⁺ redox couples and the pre-activation of a Mo compound. This study offers a facile and effective strategy to address the poor cyclability of lithium-rich manganese-based layered cathode materials.     

Extraction of Phenolic and Flavonoid Compounds from Mung Bean (Vigna radiata L.) Seed Coat by Pressurized Liquid Extraction

Mung bean seed coat (MBC) is a by-product of the mung bean processing industry. It contains a large number of phenolic compounds with therapeutic anti-inflammatory, anti-diabetic and antioxidant properties. This research aimed to investigate the optimum conditions for phenolic and flavonoid extraction from MBC by pressurized liquid extraction (PLE). Response surface methodology (RSM) was used to study the effects of temperature (80–160 °C), pressure (1200–1800 psi) and ethanol concentration (5–95%) on total phenolic content (TPC), total flavonoid content (TFC) and 2,2′-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) scavenging activity (ABTS). Scale-up extraction was also performed. The optimum conditions for extraction were 160 °C, 1300 psi and 50% ethanol. Under optimum conditions, the TPC was 55.27 ± 1.14 mg gallic acid equivalent (GAE)/g MBC, TFC was 34.04 ± 0.72 mg catechin equivalent (CE)/g MBC and ABTS scavenging activity was 195.05 ± 2.29 mg trolox equivalent (TE)/g MBC. The TFC and ABTS scavenging activity of the extracts obtained at the pilot scale (10 L) was not significantly different from the laboratory scale, while TPC was significantly increased. The freeze-dried MBC extract contained vitexin and isovitexin 130.53 ± 17.89, 21.21 ± 3.22 mg/g extract, respectively. In conclusion, PLE was able to extract phenolics, flavonoids with ABTS scavenging activity from MBC with the prospect for future scale-up for food industry.     

Quantum Computational Investigation of (E)-1-(4-methoxyphenyl)-5-methyl-N′-(3-phenoxybenzylidene)-1H-1,2,3-triazole-4-carbohydrazide

The title compound was synthesized and structurally characterized. Theoretical IR, NMR (with the GIAO technique), UV, and nonlinear optical properties (NLO) in four different solvents were calculated for the compound. The calculated HOMO–LUMO energies using time-dependent (TD) DFT revealed that charge transfer occurs within the molecule, and probable transitions in the four solvents were identified. The in silico absorption, distribution, metabolism, and excretion (ADME) analysis was performed in order to determine some physicochemical, lipophilicity, water solubility, pharmacokinetics, drug-likeness, and medicinal properties of the molecule. Finally, molecular docking calculation was performed, and the results were evaluated in detail.     

Pilot-Scale Optimization of Supercritical CO2 Extraction of Dry Paprika Capsicum annuum: Influence of Operational Conditions and Storage on Extract Composition

Supercritical carbon dioxide extraction was used to extract carotenoids from dry paprika Capsicum annuum. Studies regarding the effect of process parameters, including pressure (25–45 MPa), temperature (40–60 °C), and time (10–110 min), were carried out using response surface methodology. It was found that under optimal conditions (pressure of 45 MPa, temperature of 50 °C, and time of 74 min), the extract yield was 10.05%, and the total content of carotenoids in the extract was 4.21%, in good agreement with the predicted values (10.24% and 4.24%, respectively). Composition analysis showed that paprika extract mainly consisted of linoleic acid. There was no significant difference between the fatty acid content of the extracts obtained by SC-CO₂ extraction and n-hexane Soxhlet extraction. For functional purposes, the effect of storage conditions and time on the quality of paprika extract was also specified.     

Semiempirical Potential in Kinetics Calculations on the HC3N + CN Reaction

The reaction between the cyano radical CN and cyanoacetylene molecule HC3N is of great interest in different astronomical fields, from star-forming regions to planetary atmospheres. In this work, we present a new synergistic theoretical approach for the derivation of the rate coefficient for gas phase neutral-neutral reactions. Statistic RRKM calculations on the Potential Energy Surface are coupled with a semiempirical analysis of the initial bimolecular interaction. The value of the rate coefficient for the HC3N + CN → H + NCCCCN reaction obtained with this method is compared with previous theoretical and experimental investigations, showing strengths and weaknesses of the new presented approach.     

The Theoretical and Experimental Investigation of the Fluorinated Palladium β-Diketonate Derivatives: Structure and Physicochemical Properties

To search for new suitable Pd precursors for MOCVD/ALD processes, the extended series of fluorinated palladium complexes [Pd(CH₃CXCHCO(R))₂] with β-diketone [tfa−1,1,1-trifluoro-2,4-pentanedionato (1); pfpa−5,5,6,6,6-pentafluoro-2,4-hexanedionato (3); hfba−5,5,6,6,7,7,7-heptafluoro-2,4-heptanedionato (5)] and β-iminoketone [i-tfa−1,1,1-trifluoro-2-imino-4-pentanonato (2); i-pfpa−5,5,6,6,6-pentafluoro-2-imino-4-hexanonato (4); i-hfba-5,5,6,6,7,7,7-heptafluoro-2-imino-4-heptanonato (6)] ligands were synthesized with 70–80% yields and characterized by a set of experimental (SXRD, XRD, IR, NMR spectroscopy, TG) and theoretical (DFT, Hirshfeld surface analysis) methods. Solutions of Pd β-diketonates contained both cis and trans isomers, while only trans isomers were detected in the solutions of Pd β-iminoketonates. The molecules 2–6 and new polymorphs of complexes 3 and 5 were arranged preferentially in stacks, and the distance between molecules in the stack generally increased with elongation of the fluorine chain in ligands. The H…F contacts were the main ones involved in the formation of packages of molecules 1–2, and C…F, F…F, NH…F contacts appeared in the structures of complexes 4–6. The stability of complexes and their polymorphs in the crystal phases were estimated from DFT calculations. The TG data showed that the volatility differences between Pd β-iminoketonates and Pd β-diketonates were minimized with the elongation of the fluorine chain in the ligands.