Selection of terms for a CI wavefunction to preserve potential surface features

A cumulative selection procedure for choosing configuration functions for inclusion in CI calculations is described. The objective of the method is to obtain equal energy loss, relative to unselected calculations, for different states and different regions of the potential surface. Results obtained from calculations on the BH molecule indicate an overall advantage in comparison to the threshold selection procedure, particularly with regard to molecular geometry changes.     

Accurate Gaussian basis sets for the H2O molecule generated with the molecular improved generator coordinate Hartree–Fock method

The molecular improved generator coordinate Hartree–Fock (MIGCHF) method is used to generate accurate basis sets of primitive Gaussian-type functions for the H₂O molecule. Sequences of increasing size atom centered basis sets are employed to explore the accuracy that can be achieved with this method. Using the O(24s14p8d5f2g1h);H(22s9p5d2f1g) basis set, the HF and second-order electron correlation energies of the H₂O ground state at the experimental geometry are computed as −76.0674680 and −0.3491935 hartree, respectively. The HF energy is in error by 20 μhartree and the second-order correlation energy corresponds to 96.5% of an estimate of the limiting value. The relevance of the present calculations is to show the accuracy that can be achieved in studies of small polyatomic molecules with the MIGCHF method.     

An optical surface plasmon resonance biosensor for determination of tetanus toxin

Surface plasmon resonance (SPR) has been successfully applied for the simple, rapid, and label-free assay of various biomolecules. This assay evaluates a novel wavelength modulation SPR biosensor for the detection of tetanus toxin. The wavelength modulation SPR biosensor is designed based on fixing the incident angle of light and measuring the reflected intensities in the resonance wavelength range spanning 400-800 nm simultaneously. Tetanus toxin (TeNT), one of the most potent toxins known, is synthesized as a 150 kDa single polypeptide chain. The SPR biosensor has been shown to be capable of directly detecting concentration of tetanus toxin as low as 0.028 Lf ml⁻¹. Under selected experimental conditions, the SPR biosensor has a good reproducibility, sensitivity and reversibility. The results illustrate how wavelength modulation SPR biosensor can be used to detect biomolecular interactions.     

An investigation into the construction of molecular models by the template joining method

Summary The results of a wide-ranging investigation into some of the different methods available for performing the joining of templates to build molecular models show that the choice of algorithm can significantly affect the quality of the results obtained, and different algorithms are most suited to particular categories of join.     

Thermotropic gelation of ovalbumin 1. Viscoelastic properties of gels as a function of heating conditions and protein concentration at various pH values

A study has been undertaken of stress relaxation in ovalbumin thermotropic gels with a concentration of 8–20%, depending on time and temperature of heating (respectively, 20–60 min, 70°–110°C), at pH 2.5–10.0. In all instances, the dependence of the initial gel elasticity modulus on heating has a single maximum. Gelation conditions corresponding to this maximum are considered optimal. Optimal gelation time is 30 min, regardless of pH. On the other hand, the optimal heating temperature depends on pH. To the right and left of the isoelectric point of protein (2.5pH<4.0 and 5.5G) of gels on heating conditions, pH and protein concentration (X ₁,X ₂,X ₃,X ₄), as well as on time of relaxation (t) may be generally described asG(X ₁,X ₁,X ₁,X ₁,t)=G _e(X ₁,X ₂,X ₃,X ₄)f(t), whereG _e is the equilibrium value of the elasticity modulus, and f(t) the relaxation function. Thus, a change in the parameters only affects the value of the equilibrium elasticity modulus, and exerts no effect on the relaxation time spectrum. For this reason, all the relaxation curves obtained may be transformed into two normalized relaxation functions:f(t)=f(t)/f(1)=G(X ₁,X ₂,X ₃,X ₄,t)/G(X ₁,X ₂,X ₃,X ₄, 1)Each of these normalized functions corresponds to one of the homologous groups. Rheological similarity of gels in each homologous group evidently points to their structural similarity. Invariance of the gel relaxationproperties with regard to protein concentration, leads to a concentration dependence of the equilibrium modulus at various pH values. These dependences are curvilinear on a double logarithmic scale. The slope of the curve exceeds 2 in the entire concentration interval studied. In other words, the dependences obtained cannot be described by the usual law of squares. On the other hand, they adequately match Hermans theoretical relation for a network formed by random association of identical polyfunctional particles without cyclization. This simple model evidently gives a true picture of the major regularities of thermotropic gelation for ovalbumin. An agreement between this theory and experiment was achieved for a protein concentration ofC ^*=6.0±1.0% at the gel point regardless of pH. Invariance of gelpoint position with regards to pH demands further confirmation.List of symbols T _h,t _h heating temperature and time - T _h ^* ,t _h ^* optimal heating temperature and time - C protein concentration - C ^* protein concentration in gel-point - G relaxation modulus - G _e equilibrium modulus - f(t) relaxation function - t time of relaxation - f(t) normalized relaxation function - fT _A (t), f _B (t) normalized relaxation functions of groups A and B - G ₁ T _h,t _h-reduced modulus - G ₂ T _h,t _h, pH-reduced modulus - G ₃ C-reduced modulus - b ₁ T _h, t_h reduction parameter of modulus - b ₂ pH reduction parameter of modulus - b ₃ C reduction parameter of modulus - W_g gel-fraction     

Effect of Inorganic Ions on Oleate Adsorption at a Nigerian Hematite–Water Interface

Using “pure” natural hematite selected from a high silica Nigerian hematitic ore, oleate adsorption densities at the hematite–water interface were determined in the presence of various inorganic ions (anions and cations) of different charges and at varying concentrations. Adsorption density was determined using electrical conductivity measurements. The specific surface area of the hematite particles was determined using the method of adsorption of paranitrophenol in aqueous solution. Inorganic ions in solution depressed oleate adsorption at the aqueous hematite surface. The charge of the ion proved to be the dominant factor determining the depression of oleate adsorption. Ionic strength also was an influence, up to a limiting value at which monolayer oleate coverage of the hematite surface occurred. The inorganic ions in solution are considered to function through nonspecific adsorption in the diffuse region of the electric double layer.     

水热法合成K0.5Bi0.5TiO3纳米陶瓷粉体

K_0.5Bi_0.5TiO₃(KBT)nanocrystalline particles were hydrothermally synthesized from Bi(NO₃)₃·5H₂O, TiO₂ and KOH. The crystal phase, chemical composition and microstructure were characterized by XRD, XRF, Raman scattering spectroscopy and TEM. The results indicated that the products were pure perovskite structured K_0.5Bi_0.5TiO₃ with chemical stoichiometry and perovskite structure. The TEM observation revealed that the particles possessed a feature of cubic shape and a nano-scale of about 40 nm. The KBT ceramics sintered at 1 040 ℃ from hydrothermal powders show higher density and better electric properties than that prepared by a solid-state reaction method.     

HSCCS自由基势能面的理论研究

在CCSD(T)/6-311G(d,f)//MP2/6-311G(d,f) ZPE水平下,计算得到含有8个异构体和11个过渡态的HSCCS自由基体系势能面,讨论了异构体的结构与稳定性及异构体之间的异构化过程.结果表明异构体m1的能量最低,除m1以外,异构体m2和m3的能量也比较低,在MP2水平上,过渡态TS1的能量比异构体m2仅高3.9kJ/mol,而在CCSD(T)水平上,TS1的能量比m2低14.6 kJ/mol,这说明异构体m2可以迅速转化为能量更低的m1.异构体m3的能量比异构体m1高49.99 kJ/mol,可以推断,在合适的实验条件下可以观测到异构体m1.     

土壤重金属生物有效性的评价方法

土壤重金属污染已成为人们广泛关注的全球性的环境问题之一。重金属生物有效性已成为污染生态学研究的前沿。对国内外土壤重金属生物有效性评价方法的研究进展作了简要综述，并对今后的研究作了展望。     

A Branched Pore Model Analysis for the Adsorption of Acid Dyes on Activated Carbon

A new branched-pore adsorption model has been developed using an external mass transfer coefficient, K _f, an effective diffusivity, D _eff, a lumped micropore diffusion rate parameter, K _b, and the fraction of macropores, f, to describe sorption kinetic data from initial adsorbent-adsorbate contact to the long-term adsorption phase. This model has been applied to an environmental pollution problem—the removal of two dyes, Acid Blue 80 (AB80) and Acid Red 114 (AR114), by sorption on activated carbon. A computer program has been used to generate theoretical concentration-time curves and the four mass transfer kinetic parameters adjusted so that the model achieves a close fit to the experimental data. The best fit values of the parameters have been determined for different initial dye concentrations and carbon masses. Since the model is specifically applicable to fixed constant values of these four parameters, a further and key application of this project is to see if single constant values of these parameters can be used to describe all the experimental concentration-time decay curves for one dye-carbon system.The error analysis and best fit approach to modeling the decay curves for both dye systems show that the correlation between experimental and theoretical data is good for the fixed values of the four fitted parameters. A significantly better fit of the model predictions is obtained when K _f, K _b and f are maintained constant but D _eff is varied. This indicates that the surface diffusivity may vary as a function of surface coverage.