Reinforcement effect of MAA on nano‐CaCo3‐filled EPDM vulcanizates and possible mechanism

Methacrylic acid (MAA) was used as in situ surface modifier to improve the interface interaction between nano‐CaCO₃ particle and ethylene–propylene–diene monomer (EPDM) matrix, and hence the mechanical properties of nano‐CaCO₃‐filled EPDM vulcanizates. The results showed that the incorporation of MAA improved the filler–matrix interaction, which was proved by Fourier transformation infrared spectrometer (FTIR), Kraus equation, crosslink density determination, and scanning electron microscope (SEM). The formation of carboxylate and the participation of MAA in the crosslinking of EPDM indicated the strong filler–matrix interaction from the aspect of chemical reaction. The results of Kraus equation showed that the presence of MAA enhanced the reinforcement extent of nano‐CaCO₃ on EPDM vulcanizates. Crosslink density determination proved the formation of the ionic crosslinks in EPDM vulcanizates with the existence of MAA. The filler particles on tensile fracture were embedded in the matrix and could not be observed obviously, indicating that a strong interfacial interaction between the filler and the matrix had been achieved with the incorporation of MAA. Meanwhile, the presence of MAA remarkably increased the modulus and tensile strength of the vulcanizates, without negative effect on the high elongation at break. Furthermore, the ionic bond was thought to be formed only on filler surface because of the absolute deficiency of MAA, which resulted in the possible structure where filler particles were considered as crosslink points. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1226–1236, 2006     

Thermodynamic and surface properties of Sb-Sn and In-Sn liquid alloys

The thermodynamic properties of Sb-Sn and In-Sn liquid alloys have been studied using the quasi-chemical model for compound forming binary alloys and that for simple regular alloys. The concentration fluctuation S _cc(0) and the Warren-Cowley short-range order parameter (α ₁) were determined for the whole concentration range at a temperature of 770 K. The surface tensions of these liquid alloys were determined for the whole concentration range by using energetics determined from thermodynamic calculations. In all calculations, In-Sn manifested properties very close to alloys of ideal mixing, while Sb-Sn showed properties that are asymmetric about equiatomic composition. Our results suggest that a weak complex of the form SbSn₂ could be present in the Sb-Sn alloy at a temperature of about 770 K.     

Algorithms for finding proper essential surfaces in 3-manifolds

In this paper, we present an algorithm which, for a given compact orientable irreducible boundary irreducible 3-manifold M, verifies whether M contains an essential orientable surface (possibly, with boundary), whose genus is at most N. The algorithm is based on Haken’s theory of normal surfaces, and on a trick suggested by Jaco and consisting in estimating the mean length of boundary curves in an unknown essential surface of a given genus in the given manifold.     

Computation of moisture and temperature profiles in soil—The coupled model

The coupled model has been developed in this study for moisture transport and beat exchange in soil. The model is driven by atmospheric conditions measured in a field. The concept that soil has a surface resistance to evaporation is introduced in order to relate the evaporation from surface with the vapour flux in air. With the use of this concept, the simulation results agree quite well with the measured data.     

绕圆柱体自由表面磁流体流动和传热的研究

本文对在不同雷诺数下,绕圆柱体的磁流体自由表面流动及传热进行了模拟,分析了磁场对绕流圆柱尾迹和涡分离的影响,获得了两种雷诺数下的电磁力密度、流场和温度场分布。结果表明,磁场不仅影响了流动的形态,而且对湍流有抑制作用,降低了自由表面的更新机制,从而减少了传热能力;在相同的Hartmann数下,相比低雷诺数下的流动换热情况,高雷诺数下的湍流不能被完全抑制,自由表面与尾迹的相互作用也较强,因而自由表面换热也较强。     

LIGHTWAVE PROPAGATION IN SUBWAVELENGTH HOLES

In this paper we evaluate methods for calculating dispersion relations for waves with wavelengths of the order of hundreds of nanometres propagating in square waveguides with imperfectly conducting walls. The methods considered here are based on those used previously for rectangular dielectric waveguides.     

关于非球面制造技术的看法

列举了现代诸高科技领域对非球面光学系统的需求实例，如短波光学，空间光学，红外光学，微电子技术等。然后比较讨论了刀口阴影法与数字干涉检验的优缺点。在非球面修磨方法方面，首先肯定了计算机辅助加工是发展的方向，指出其主要优点在于“失误”造成的反复率大大降低。最后对非球面技术提出了总的看法，并对检测方法和修磨方法提出了几个研究课题。     

Likelihood estimation of soft-core interaction potentials for Gibbsian point patterns

The likelihood method is developed for the analysis of socalled regular point patterns. Approximating the normalizing factor of Gibbs canonical distribution, we simultaneously estimate two parameters, one for the scale and the other which measures the softness (or hardness), of repulsive interactions between points. The approximations are useful up to a considerably high density. Some real data are analyzed to illustrate the utility of the parameters for characterizing the regular point pattern.     

Surface properties of finite classical Coulomb systems: Debye-Hückel approximation and computer simulations

We report analytical and numerical studies of surface correlations in finite, homogeneously polarizable, classical Coulomb systems placed in an insulating or conducting environment. Their purpose is to understand the phenomenological, shape-dependent laws of electrostatics, from the point of view of statistical mechanics; we focus on the knowledge of the dielectric susceptibility of the system, a quantity proportional to the equilibrium fluctuation of the system's instantaneous polarization per unit volume. This goal has been achieved for a system in a conducting state. The picture is that the shape-dependent part of the susceptibilities results from the action of unbounded observables (the second moments of the instantaneous polarization of the system) on long-range surface correlations and that the relations of electrostatics are verified by means of shape-dependent thermodynamic limits. This picture is supported (i) by exact solutions and asymptotic analysis of the Debye-Hückel approximation of multicomponent plasmas in disks and spheres with insulating and conducting environment and also in ellipses in a vacuum, and (ii) by computer simulations of a one-component plasma in a disk with different environments, notably a conducting environment with permeable and impermeable wall. These observations have revealed for the first time the reason why the susceptibility of a conducting disk in a conductor with impermeable walls diverges linearly with the radius of the disk: this is due to the occurrence of long-range radial correlations in the conductor. These findings are quantitatively interpreted in terms of a novel canonical Debye-Huckel approximation as contrasted to the ordinary grand canonical version. Lastly a fresh look at the problem of the surface correlations of a conductor in a vacuum, which places the observer close to the surface of the conductor but in the vacuum, is presented and applied to the disk, the ellipse, the cylinder, the sphere, and the wedge.     

金属表面在反射方向产生光学二次谐波的研究(Ⅰ)

用Rudnick和Stern引入的唯象参数“a”和“b”来描述表面电流,本文推导了金属表面在反射方向产生的光学二次谐波的表达式.由此证明了:从谐波信号随入射光偏振态的变化可以直接得到关于参数“a”的信息.和过去的实验相比,这种方法能更加精确、可靠地测定“a”的数值.